Designed for large venues, the 120V Da-Lite 29316 Wireline Advantage Motorized Projection Screen 72.5x116"uses thin steel cables instead of black drop to lower the screen to an appropriate viewing height. Once the screen is installed, the screen's trim conceals the rough opening in your ceiling, eliminating the need to complete additional trim work. Sliding installation brackets help make it easy to attach the screen housing to the structure above the drop ceiling.

137" Diagonal / 16:10 Aspect Ratio    HD Progressive 1.3 Surface    1.3 Gain / 150° Viewing Angle    Suspended from Cable up to 29'    Slim-Tab, Low-Profile Tab-Tensioning    Hand-Held Remote Included    Built-In Radio-Frequency Motor    Seamless, Black-Backed Screen Surface

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Up to 29' of cable to accommodate appropriate viewing height in rooms with high ceilings
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension
• UL Plenum-rated case
• Works with separately available radio-frequency control accessories such as a single-channel wall switch, dry contact interface, and RS-232 interface
• Black-backed screen material for enhanced image quality and opacity
• Seamless screen surface

Related Questions and Answers

Q: 1. CAN I USE THE Godox BLP LED Projection Attachment for Bowens on the Godox AD600Pro Witstro All-in-One Outdoor Flash?

A: Yes, the Godox BLP LED Projection Attachment for Bowens is compatible with the Godox AD600Pro Witstro All-in-One Outdoor Flash.

Q: 2. does this fit on the GVM 60w cube light?

A: The GVM 36° Projection Kit was not designed to be used on the GVM 60W light. There is a compatibility list offered by GVM, and it states that this kit will only be compatible with GVM's PR150D, Pro SD200B, Pro SD300B, SD80D, SD300D, SD300S, SD200D, and SD200S models.

Q: 3. What is the focal length of the included lens?

A: The Godox BFP Flash Projection Attachment for Bowens comes with an 85mm lens.

Q: 4. Would this work well on a Profoto B10 light with a bowens to Profoto adapter?

A: Godox BFP Flash Projection Attachment for Bowens will work with the GTX STUDIO Bowens to Profoto Flash Head Adapter.

Q: 5. Will the gobo and iris slot accept standard B gobo holders and irises for an ETC Source 4?

A: No, the Arri Orbiter 25º Projection Optics is not interchangeable with gobo holders or irises used on the ETC Source 4 Ellipsoidal.

Q: 6. Will this work with aputure units? Will it work with 600x/d/c?

A: The Godox BLP LED Projection Attachment for Bowens BH #GOBLP is designed for Bowens mount LED lights under 300w.

Q: 7. Which adjustable iris will work with the Arri Orbiter Projection Optics?

A: The ARRI Orbiter 25° Projection Optic has a standard size B 86mm iris slot.

Q: 8. Dear All, how close to the back ground wall can it be placed? Thanks

A: How close this lens can be placed in relation to a background wall would be dependent on the type of lighting being used. For example, if this lens was used with one of the Dedolight DLH4 Tungsten Lights, that would produce a greater amount of heat versus using the lens with a Dedolight DLED4.1 LED Light.

Q: 9. Is the speed ring interchangeable? If so, what size is it?

A: The speedring that is part of the Godox BFP Flash Projection Attachment for Bowens is not interchangeable.

Q: 10. What's the difference between the DP1 and the DP1.1 ?

A: The DP 1.1 is an updated version of the DP1 which now has a double lens system and is optimized for use with the DLED lamp heads. This system would help increase the light output and offer better optical performance.