Designed for large venues, the 120V Da-Lite 29266 Wireline Advantage 65x116 Motorized Screenuses thin steel cables instead of black drop to lower the screen to an appropriate viewing height. Once the screen is installed, the screen's trim conceals the rough opening in your ceiling, eliminating the need to complete additional trim work. Sliding installation brackets help make it easy to attach the screen housing to the structure above the drop ceiling.

133" Diagonal / 16:9 Aspect Ratio    HD Progressive 0.9 Surface    0.9 Gain / 170° Viewing Angle    Suspended from Cable up to 29'    Slim-Tab, Low-Profile Tab-Tensioning    Hand-Held Remote Included    Built-In Radio-Frequency Motor    Seamless, Black-Backed Screen Surface

Ideal for moderate to high output projectors, the light gray surface provides balance between color reproduction and image contrast. Cone: 170° Gain: 0.9

• Up to 29' of cable to accommodate appropriate viewing height in rooms with high ceilings
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension
• UL Plenum-rated case
• Works with separately available radio-frequency control accessories such as a single-channel wall switch, dry contact interface, and RS-232 interface
• Black-backed screen material for enhanced image quality and opacity
• Seamless screen surface

Related Questions and Answers

Q: 1. Will it fit a Canon 6D with attached Tamron 27-240, plus a Canon L series wide angle lens?

A: The WANDRD PRVKE (Green) will hold the 6D with two lenses.

Q: 2. Hi,Does the price include the tripod and the ground spreader as shown in photo?

A: Hi, this is price for tripod only

Q: 3. ll this handle works with a Nikon Z9 or maybe too heavy camera for installing this type of handle?

A: The SmallRig Top Handle with Shoe Mount (Lite) could damage the hotshoe of the Nikon Z9 Mirrorless Camera because of the weight of the camera. It is best practice to mount this to a cage and not directly onto the hotshoe of the camera to prevent damage.

Q: 4. Compatible with A7siii and raw recording?

A: The a7s III raw video can only be recorded with an external recorder. The Delkin Devices 1TB Advantage UHS-I SDXC Memory Card will work for raw still images.

Q: 5. I was given a new unit and I need a cord Could you give me a part number?

A: The XYZ power coed is not available at B&H.

Q: 6. Can you replace the glass bed on the Jr 1.0? How?

A: Scott is correct

Q: 7. How big of a water bottle can it hold? I wanted to take this bag hiking and I usually take a 40oz Thermoflask.

A: The Specifications of the water bottle are not listed from BH or the manufacturer's website. I would say a classic 16oz water bottle would fit with no issue, this should give you a point of reference.

Q: 8. Would this work well for shooting on the BMPCC 4k?

A: Delkin Devices 1TB Advantage UHS-I SDXC Memory Card BH #DEDDSDW633 has a Max Read Speed: 100 MB/s, Max Write Speed: 80 MB/s and min Write Speed: 30 MB/s which is slow if you want to record at 4K60.

Q: 9. How do you get the laser?

A: Unfortunately, B&H doesn't carry the engraver module for this model. Sorry for any inconvenience. You can use the link below to purchase it directly from XYZprinting. https://bit.ly/2J23BeM

Q: 10. HOW DOES IT PRINT OBJECTS WITH LARGE OVERHANG ? WHAT I MEAN IS , CANTILEVERED...DOES IT REQUIRE SUPPORT MATERIAL FOR THE OVERHANGING PART?

A: The build volume is maximum: 5.9 x 5.9 x 5.9 material. It does not require support for large overhang. You will need to experiment to see what the filament support limit is.