Designed for large venues, the 120V Da-Lite 29267 Wireline Advantage 65x116 Motorized Screen 120Vuses thin steel cables instead of black drop to lower the screen to an appropriate viewing height. Once the screen is installed, the screen's trim conceals the rough opening in your ceiling, eliminating the need to complete additional trim work. Sliding installation brackets help make it easy to attach the screen housing to the structure above the drop ceiling.

133" Diagonal / 16:9 Aspect Ratio    HD Progressive 1.1 Surface    1.1 Gain / 170° Viewing Angle    Suspended from Cable up to 29'    Slim-Tab, Low-Profile Tab-Tensioning    Hand-Held Remote Included    Built-In Radio-Frequency Motor    Seamless, Black-Backed Screen Surface

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction. Cone: 170° Gain: 1.1

• Up to 29' of cable to accommodate appropriate viewing height in rooms with high ceilings
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension
• UL Plenum-rated case
• Works with separately available radio-frequency control accessories such as a single-channel wall switch, dry contact interface, and RS-232 interface
• Black-backed screen material for enhanced image quality and opacity
• Seamless screen surface

Related Questions and Answers

Q: 1. Is this bulb equivalent to the SVQL250 used in the Smith-Victor Model Q250 light?

A: The following bulbs replace the SVQL250; https://www.bhphotovideo.com/c/search?Ntt=fkt%20bulb&N=0&InitialSearch=yes&sts=ma

Q: 2. Why do these bulbs not exist in daylight color temperature?

A: That's a good question and something I've wondered about, as well. I know that, as a modeling lamp, they're meant to be easy on the subject's eyes and keep them dilated in between strobe flashes, while emitting just enough light to satisfy the auto-focus needs of the camera. But, as an alternative, I've sucessfully used the long, slim G.E. LED Brightstiks which are daylight balanced to 5000K and fit the E26/27-style base in most strobes. Lumen ratings are limited to 760-1100, however, so you'll give up quite a bit of brightness. I don't find that to be too much of a problem and actually think it's easier on the subject's eyes not having to adapt back and forth from warm to cool light. They support consistent auto white balance, too.

Q: 3. Is this compatible with Westcott Photoflood 500W bulb?

A: yes, yes it does indeed work with it. Thats what i use for my westcott light and it works perfectly

Q: 4. Is this usable as a modelling lamp for Profoto Prohead Plus heads (w/ 100mm cover)?

A: Yes this modeling lamp can be used with the Profoto Pro Head Plus Flash Head.

Q: 5. How many units of this reference are per box?

A: I'm not sure I really understand...There is one bulb per box. So each bulb/lamp costs $45.82

Q: 6. Is the color produced by this bulb orange or white?

A: The color temperature of the EMD lamp is 3200k, which means that it is tungsten-balanced rather than daylight-balanced.

Q: 7. I need four.

A: Buy Four if you need four! i have several spares because i drop them and knock my light stand over.

Q: 8. I have Lowel Tota continuous light. A bulb just got broken in transit.I want this 1000 w instead of 750 w can I use this 1000 w bulb ?

A: No

Q: 9. Will this bulb work as a replacement modelling light bulb for the Elinchrom ELC Pro 1000 self contained head?

A: The Ushio DRA Lamp (300W/120V) is a suitable modeling light replacement for the Elinchrom ELC 1000 Monolight.

Q: 10. Can these work with my lowel omni lights?

A: I am not sure since my lights are not Lowel Omni. They are Britek Brifocus.