The ARRI Cine Set for Canon C300 Mk IIfrom ARRI Cine Set for Canon C300 Mk IIis specifically designed to work with C300 Mk II, C300, and C500 cameras. This plate is directly compatible with ARRI studio bridge plates like the BP-8 and BP-9. The Canon Cine Plate has front and rear holders for lightweight 15mm rods (not included), enabling you to flesh out your camera rig with rod-mounted accessories. Both 1/4"-20 and 3/8"-16 screws are provided for mounting the plate to the camera.

Rosettes on both the right and left sides of the Canon Cine Plate offer points for attaching handgrips. Anti-twist pins prevent the plate from slipping askew when attached to the bottom of your camera.

For Canon C300 Mk II/C300/C500 Cameras    Cine Plate with 15mm LWS Support    CSP-1 Shoulder Pad    Compatible with BP-8/BP-9 Bridge Plates    Front & Rear 15mm LWS Rod Consoles    Integrated Handgrip Rosettes    Pair of 13" 15mm Rods

Fits directly to studio bridge plates like the ARRI BP-8 and BP-9

Integrated, lightweight 15mm rod support at the front and rear of the plate

Enables the addition of 15mm rod-mounted accessories to your Canon C300 Mk II, C300, or C500 rig

Rosettes on both right and left sides for attaching a handgrip or other rosette-based accessory

Anti-twist pins prevent the plate from skewing off center when attached to the bottom of the camera

Related Questions and Answers

Q: 1. Could I use this with the C300 mki?

A: Yes, this will work with the original C300, C300 Mark II and the C500.

Q: 2. Wishful thinking more than anything, it does say specifically for the C200 , so here goes: Will this work with the C300 II?

A: We (and probably Canon) have not tested this so we only have the opinion that while this monitor may well connect and show an image, we doubt greatly that touch screen control will be possible. When the camera comes out, hopefully someone will be able to test this.

Q: 3. How about making it work with the C100 dual-pixel for touch focus? (with a FREE firmware update)

A: At this time, this monitor is for the C200 and C200B only.

Q: 4. Will this modification kit work with the C300 Mark II and the Canon CN 17-120 Zoom Cine Lens?

A: You can mount the Canon CN7x17 KAS S Cine-Servo 17-120mm T2.95 (PL Mount) onto the the C300 mark 2 with this modification kit.

Q: 5. Need guide, I am looking for full set like hand grip and matte box also with this item

A: Movcam offers the Canon C300 MKII Broadcast LWS Kit. B&H # MOVC300MK2BK is a complete kit that includes the MM102 Matte Box, 144:114mm Clamp Adapter Ring, VCT-14 Plate for C300 Camera Rig, C300 MKII Top Handle, MF2 Mini Follow Focus, V-Mount Battery Distribution Box, 15mm Rod Clamp, D-Tap to 4 pin LEMO Power Cable, Canon OEM Grip Relocator Adapter, two Rosette Spacer Adapters, two 4 Rosette Extensions, an Anti-Skid Hand Grip, two 8 Aluminum Rods, and two 4 Aluminum Rods.https://bhpho.to/2uUJmKO

Q: 6. Does this monitor comes with the proper connector cable?

A: At this time, Canon has yet to finalize details regarding the C200 model. That being said, B&H has been told by a Canon representative that the cable is probably included with this monitor. Watch here for further details as they become available.

Q: 7. Is this also compatible with the C500 Mk II / C300 Mk III?

A: The ARRI Basic Cine Set for Canon C300 Mk II is not compatible with the C500 Mk II / C300 Mk III.

Q: 8. Will this work with the C300 Mark II?

A: No, the ARRI Pro Set for Canon C300 Mk III/C500 Mk II does not work with any other cameras.

Q: 9. Is this adapter compatible with Sigma T1.5 Cine FF High-Speed Art PL Mount Prime Lenses?

A: The Sigma PL mount protrusion, measures at 18.6mm or .73”. Yes it would be compatible with this adapter.

Q: 10. Is this plate compatible with the BP-5 adaptor. I am looking to be able to remove the shoulder pad part and attach the camera to a slider without having to remove the plate from the camera?

A: Not that we are aware of. This product is meant to have the camera mounted directly to it.