With four Gigabit PoE+ ports and dual dedicated SFP slots, the TRENDnet 6-Port Industrial Gigabit PoE+ DIN-Rail Switchfrom TRENDnet 6-Port Industrial Gigabit PoE+ DIN-Rail Switchis designed to power a variety of PoE compatible devices. This switch features a 60- to 120-watt power budget and comes equipped with a 12 Gbps switching capacity and a 9 KB jumbo frame to handle a large amount of network traffic.

Installation is simple as this switch includes both DIN-rail and wall mounts along with a hardened IP30 housing to help protect against physical damage. The TI-PG62B can even withstand extreme temperatures of -40 to 167 degrees. Once installed, a network administrator can plug a redundant power supply (sold separately) into the switch for backup power while the built-in alarm alerts admins to a power failure.

4 x Gigabit Ethernet Ports    2 x Dedicated SFP Slots    60-120W Power Budget    12 Gbps Switching Capacity    IP30 Rated Metal Switch    Alarm Output Triggered by Power Failure    Includes DIN-Rail and Wall Mounts

4 x Gigabit PoE+ ports and 2 x dedicated SFP slots

IP30 rated metal enclosure with included DIN-rail and wall mount hardware

12 Gbps switching capacity

Dual redundant power inputs with overload current protection (power supply sold separately)

Alarm relay triggered by power failure of primary and/or redundant power

Sends larger packets, or Jumbo Frames (up to 9 KB), for increased performance

Industrial switch is rated for an operating temperature range of -40 to 167°F (-40 - 75°C)

Rated for shock (EN 60068-2-27), freefall (EN 60068-2-32), and vibration (EN 60068-2-6)

Grounding point protects equipment from external electrical surges

Related Questions and Answers

Q: 1. Are all 8 ports POE+? The yellow decal under them has POE on the left and then between 4 and 5 it says POE+ so want t be sure it's all 8 and not just 5, 6, 7, 8.

A: PoE on all 8 ports. Total budget 123w.

Q: 2. I am look at hard wiring 4 trend-net ip camera to a computer. Will this box allow be to do that? and access the IP address of each camera?

A: Yes, it will work. I'm not familiar with the IP cameras, but I would think that you'll need POE injectors to power the cameras using this switch. You other option would be to purchase a POE switch, which would provide the necessary power to the cameras.

Q: 3. how does the switch get its data to distribute to devices?

A: You would plug your router/modem in to 1 of the 8 ports and up to 7 other devices in to the remaining ports.

Q: 4. What port number does the incoming from server go into, I'm assuming number 1? TIA

A: The manufacturer has not specified any of the TPE-TG84's Ethernet ports as a designated upstream port.

Q: 5. is this device TPE-TG240G a managed switch?

A: Dear Bulalo! Thanks for your interest in TRENDnet! Please note it’s not a managed switch. Hope this helps! If you have any more questions, you can always respond directly to this thread and someone will be happy to try and help answer any additional questions you may have! Have a great day! Adrian TRENDnet CS

Q: 6. What firmware version is on this switch? I see alot a sales of the version 1.0R which is obsolete by Trednet.

A: Unfortunately we are unable to check the serial, batch, firmware or OS version of a item before it ships.

Q: 7. Is this switch loud? I'm using in a studio control room.

A: It is very quiet.

Q: 8. is it wall mountable?

A: Yes it is wall mountable using two screws that fit into the keyhole slots on the bottom of the unit.

Q: 9. So just answered my own question? I see the rackmounts are included. Doh!

A: Glad you got your answer!

Q: 10. Does this switch provide POE?

A: No, the TRENDnet TEG-S82g 8-Port Gigabit GREENnet Switch does not support PoE.