Help protect your lens hood from dirt, dust, moisture and bumps with the Realtree Max5 LensCoat Hoodie Lens Hood Cover. The x-small cover will fit a lens hood measuring 2.75 to 3.25" in diameter. Made from neoprene, it provides a thermal barrier, and is easy to install or remove. The Hoodie has a reinforced, removable, front lens element disc made from rigid plastic and foam to protect your glass from damage. Use this made in the USA hoodie to complement the LensCoat cover of the same color on your lens.

The Realtree Max5 camouflage pattern offers maximum effectiveness in open terrain. The pattern incorporates cattails, reeds, cane and grasses to blend into flooded marshes, plus corn, wheat, oats and sunflowers to hide you in open fields.

Waterproof Neoprene Cover    Easy to Install and Remove    Provides a Thermal Barrier    Made in the USA

Related Questions and Answers

Q: 1. what size fits the canon 400mm 2.8 iii?

A: The XXXX-large is the one that will fit. You can click the link below to view; https://www.bhphotovideo.com/c/product/508943-REG/LensCoat_LCH4XLBK_XXXX_Large_Hoodie_Lens_Hood.html

Q: 2. What size would you recommend this for the Nikkor 85mm f/1.8g?

A: I would recommend something along the lines of this: https://www.bhphotovideo.com/c/product/919752-REG/op_tech_usa_7801062_3_5_x_4_5_fold_over.html This would fit the lens with a bit of extra room to provide some extra padding.

Q: 3. what size hood is needed for the canon rf 100-500 lens?

A: The diameter of the Canon RF 100-500mm f/4.5-7.1 L IS USM Lens is 3.7". So, the LensCoat Hoodie Lens Hood Cover (Small, Digital Camo), BH #LELCHSMDC, is the correct size.

Q: 4. Would this fit over a Sony Rx10M4 with the plastic lens hood in place?

A: Yes, it will just fit.

Q: 5. What size LensCoat Lens Hoodie would you recommend for the SAMYANG 8/3.5HD FISHEYE LENS W/HOOD? The diameter of the hood is 2.75 inches so this is right on the size boundary.

A: I have both an extra small and a small Len Coat Hoodie. I can put them both over a lens with 3 diameter lens shades however the small size is a bit easier to fit, particularly if the lens shade is deeper.Lens Coat's does not appear to indicate the hood size of their hoodie's. In my opinion it would also be better if they provided pull taps on the hoodie to help pull these hoodies over the end of the lens. I use them on lens that I like to keep the lens hood/shade attached to the lens.

Q: 6. Will this hoodie be a good fit for a 72mm B+W metal lens hood that has a front opening of 3 1/16?

A: Yes this would fit your hood.

Q: 7. What size is needed to fit over the stock plastic lens hood for a Canon 70-200 f2.8 IS II?

A: No it does not, fall right off

Q: 8. Would this fit over a 77mm ND filter mounted on a lens?

A: Yes, it will fit.

Q: 9. Size for canon 35-70?

A: Hello IraThe two Lenscoat medium Hoodies I bought were to replace the original plastic lens covers provided by Canon. It was taking too much time to remove and replace these plastic covers in the field so I now use Lenscoat hoods for all my lenses from 600mm down to 17-40mm.The medium hoods are for my 300mm f4 and 400mm f5.6 lenses that have a 77mm diameter. (They take 77mm filters) These hoods provide a loose fitting which is fine for me. You should check your lens diameter and make your choice on that. Based on my findings for a lens with 72mm or smaller diameter I use a smaller size than medium.The hoods are of high quality and provide extra benefit in that they don't get lost as easily as the plastic covers. I wholeheartedly recommend them.RegardsTerry

Q: 10. Does it work with the Tokina SD 16-28mm 2.8?

A: I purchased this hood for the same lens. It makes a snug fit, and the end is fairly solid, so it should not contact the glass. However, it does remove the snap-on lens cover I was using as a replacement for the original Tokina lens cover.