Made from a soft neoprene, this set of three LensCoat LegCoat Wraps 115 Realtree MAX-5 Set of 3wrap around the upper part of your tripod's legs for protection as well as comfort when being handled. Using touch fasteners, the soft neoprene wraps are easily affixed to a tripod and create a thermal barrier to keep the tripod manageable, even in extremely hot or cold conditions. The wraps also provide protection from bumps and scratches. To ensure the best quality it is made in the USA.

This model is 15" long and is designed for tripods with leg diameters of 0.75-1.18", such as the Gitzo Series 1 and 2.

For Gitzo Series 1 and 2 Tripods    For Tripod Leg Diameters 0.75 to 1.18"    Length: 15"    Protection from Scratches    Creates a Thermal Barrier    Comfortable Cushion & Firm Grip    Touch-Fastened Closure    Soft Neoprene Construction    Made in the USA

Touch fastener for easy attachment and removal

Inside coating of the wrap is designed to prevent the tripod from slipping

The wrap creates a thermal barrier that makes the tripod easier to handle when outside in temperature extremes

The neoprene material is lightweight and designed to be comfortable against your body

Related Questions and Answers

Q: 1. Will this fit my Manfrotto 055 tripod?

A: Those wraps have been discontinued. The proper replacement for your tripod are the 115 wraps, please click the link below to view; https://bhpho.to/2Me868C

Q: 2. Is this LegCoat compatible to my Gitzo GT3543LS Systematic Series 3 Tripod?

A: You can go to the product maker's website and when you click on LegCoat Wraps, it asks you to identity the make and model of your tripod. According to your tripod, it says you need LegCoat Wraps 312.

Q: 3. What is best size for RRS TVC-24?

A: These are designed for specific Gitzo tripods. They are not made for RRS options and we are not aware of them being able to work with them.

Q: 4. Will these fit the Gitzo 3542L tripod legs?

A: Lens coat specifies the 310 wraps are the correct ones. The 316 leg wrap is the same diameter, but at 16 inches long, might be a little too long. I would measure the length of the main leg tube, and get the wrap that comes closest, but is not longer than that measurement. I have ignored Lenscoat recommendations in the past and just made sure length and diameter were right and that has worked out well for me every time.

Q: 5. what do I need for RRS TQC-14 ?

A: Hello DL,Thanks for your question. Do not have that tripod per se, but I know well Lenscoat and RRS(LC518 for TVC-43).While the width of this lenscoat can accommodate the diameter of the first leg segment of TQC-14(1.10 -1.14 ),the length of 115 lenscoat(15 ), could be longer than the first leg segment of the tripod(distance between leg angle joint, to the first leg lock).The tripod folded is 17.7 , including spider(top) plus 3 leg locks plus foot(each leg). Considering this, I do not think the first leg segment is 15 , and the remaining parts of the tripod are just 2.7 length.First leg segment should be little shorter than 15 , I think.I think you need a shorter lenscoat of the same width(0.75 -1.18 ).Checked the inventory, the next smaller one, is lenscoat 111(which is 11 length).I think it's the correct available size, though not sure if it can cover the whole or most part of the first leg segment length.

Q: 6. What diameter and length do I need to purchase to cover the rrs TVC-34L?

A: According to the LensCoat website, you need LegCoat Wraps 514. That's what I got for mine, and they work great.

Q: 7. What length will fit the Robus RCC-5560, please?

A: The LensCoat LegCoat Wraps 315 supports tripods with leg diameters of 1.25" to 1.4" and will be compatible with the Robus RCC-5560 Vantage Series C 4-Section Carbon Fiber Compact Tripod (B&H # RORCC5560).

Q: 8. Do these tend to run small or large? I have a tripod with leg diameter 1.23", was wondering if I should size up or down.

A: These typically run a bit big, sizing down would be prudent.

Q: 9. Can this product be washed and not het ruined? alot of my work is being done by the sea...

A: Yes they are washable with worm or cold water

Q: 10. What is the correct size LegCoat for an FLM CP38-L4 II?

A: The correct model is the the LensCoat LegCoat Wraps 514 (Set of 3, Black), BH #LELW514BK: https://bhpho.to/3c8PMYY