Jbl Vma2120 120W Bluetooth Mixer Amplifier 8-In/2-Out

Jbl Vma2120 120w Bluetooth Mixer Amplifier 8-in/2-out

Product Code: eq39871
Availability: In Stock

$2,430.00 $3,159.00

Qty

8 reviews Write a review

Description
Reviews (8)

The JBL VMA2120 is a Commercial Series Bluetooth-enabled mixer/amplifier designed to provide flexible multi-source mixing and amplification for installation in restaurants, educational institutions, fitness centers, and retail stores. It features an 8-in/2-out mixer and 120W of output power. It can be installed in a standard 19” equipment rack with the supplied rackmount kit or set on a surface such as a desk or ledge.

Stream music wirelessly via Bluetooth or connect a USB drive to the front-panel USB Type-A port. Route other sources via Euroblock, RCA, and 1/4" input jacks. The integrated mixer offers level controls as well as bass and treble for each channel. Routing to the Euroblock outputs is configurable. The VMA2120 supports voice-activated ducking and priority muting. The front-panel controls and display make operation easy, and remote volume control is possible via a JBL CSR-V module and a standard Ethernet cable (both available separately).

8-Input Mixer Supports USB Drives and Bluetooth 120W, 2-Output Amplifier Euroblock, RCA, and 1/4" Inputs Euroblock Outputs Per-Channel Bass and Treble Controls Voice-Activated Ducking Front-Panel Display and Controls Configurable Output Routing Includes Rackmount Kit

Key Specs
Number of Channels	8 Input / 2 Output
Amplifier Power Rating	4 Ohms / 8 Ohms: 120 W per Channel (1 kHz, 0.5% THD)
Load Impedance / Voltage	4 Ohms (Minimum) 70 V (40 Ohms Minimum) 100 V (80 Ohms Minimum)
Amplifier
Form Factor/Type	Tabletop
Number of Channels	8 Input / 2 Output
Amplifier Power Rating	4 Ohms / 8 Ohms: 120 W per Channel (1 kHz, 0.5% THD)
Load Impedance / Voltage	4 Ohms (Minimum) 70 V (40 Ohms Minimum) 100 V (80 Ohms Minimum)
Performance
Frequency Response	20 Hz to 20 kHz ±2 dB (Low-Z) 80 Hz to 15 kHz ±3 dB (70/100 V)
Input Sensitivity	Mic: 5.5 mVrms Line: 1.3 Vrms Stereo RCA: 130 mVrms
I/O Impedance	Mic Input: 400 Ohms Line Input: 20 Kilohms (Balanced) RCA Input: 50 Kilohms
Insertion Loss	1 dB Maximum
SNR	> 76 dB (at Rated Power, A-Weighted)
THD	< 0.5% (20 Hz to 20 kHz)
Crosstalk	-70 dB (at Rated Power, Mid Gain, 1 kHz)
Signal Processing
EQ	2-Band per Channel: Bass: ±14 dB at 50 Hz Treble: ±14 dB at 10 kHz
Connectivity
Phantom Power	27 VDC
Power
AC Input Power	100 VAC, 50 / 60 Hz 120 VAC, 50 / 60 Hz 220 VAC, 50 / 60 Hz 220 to 240 VAC, 50 / 60 Hz
Physical
Operating Conditions	32 to 95°F / 0 to 35°C up to 95% Humidity
Storage Conditions	-4 to 185°F / -20 to 85°C
Dimensions	17.0 x 3.5 x 16.3" / 432.0 x 88.0 x 415.0 mm
Weight	29.3 lb / 13.3 kg
Packaging Info
Package Weight	35 lb
Box Dimensions (LxWxH)	21 x 20.5 x 6.5"

Suitable for commercial and industrial use

Euroblock, RCA, and 1/4" TRS input connectors

Independent bass and treble controls for each output channel

Voice-activated ducking during announcements

Remote volume control capability using optional JBL CSR-V module and Cat5e cable with RJ45 connectors

Priority muting using PTT switch closure

Configurable output routing

Barrier block output connections to drive 8 Ohms, 70V or 100V speaker systems

Media player capable of playing MP3 files from a Bluetooth device or USB drive

Related Questions and Answers

Q: 1. The amp is listed as 120 watts and there are two output channels. So, the amp is 120 watts per channel, correct? In other words, in a 70v application with two separate chains of speakers, each chain would have 120 watts available?

A: This amp is 120 watts per channel. In a 70v setup, each amp is putting out 120 watts.

Q: 2. I'm not getting any signal. Anything I can do?

A: That doesn't give me much to go on. What modules do you have installed? What are you using for a source? Is the unit powering on? Did you check the fuses? What are you using it for? I don't know if you are a newbie or a audio professional, so I don't really know where to start. I'm not an audio pro myself, but did install one of these recently, so, if you can give me as much information as you can maybe I can help you out.

Q: 3. does this switch video along with audio with USB? If I have a video/audio file will it switch and output with audio and a video signal to my projector.?

A: It is not a switcher. It only has USB & SD Card Readers

Q: 4. What do I check if there is no sound when I pair with bluetooth to my phone?

A: You will first need to verify that your indeed paired correctly. Go to your devices setting, and then Bluetooth, and make sure that you are connected to JBL VMA160. Then, make sure your device's volume is up, start at about 50%. Next, go to the VMA and make sure that input channel "music" is turned up, and that the Master volume (all the way to the right) is also turn up. Start all the way down and slowly increase the Master volume, as not to push too much signal. If you continue to experience issues connecting, please give us a call at 800-606-6969 and a Pro Audio Product Specialist will be happy to assist.

Q: 5. Why Is there no 70 volt output on my p912mk2?

A: The TOA P-912MKII features 4 and 8 ohm outputs as well as a 25V and 70v output on screw terminals. Please refer to page 6 of the manual for the location of this connection. http://bit.ly/1M5Yfvh

Q: 6. Does this include the rack brackets with purchase?

A: Yes. The rack mounting kit is included.

Q: 7. How can I turn off the amplifier's sleep mode?

A: We are having BIG problems with the Sleep Mode. Even when there is signal, the unit is going in to sleep mode. We stood in front of a group of 15 at a church yesterday, all of them angry that we don't have a solution for this. Most times the unit does not come back on with signal, we have to power cycle, which causes a significant pop in the speakers.

Q: 8. Can you show me the wiring diagram

A: JBL has not posted the wiring diagram (schematics) for the CSA 1120Z but they do have the user manual available. Here is a link: http://jblpro.com/en/product_documents/csa_5040963_en_140120pdf--2 You can contact JBL directly to request a wiring diagram. You can reach their tech support department by phone at 844-776-4899 (Option 2) or by email at HProServiceUSA@harman.com.

Q: 9. Will this amp work with a JBL 25t?

A: Yes it should power them just fine.

Q: 10. how many wireless mics can I use with this unit?

A: This mixer has two mic inputs for a total of two wireless microphones.

Elizabeth	09/09/2024
[1 dB Maximum] Just wish they kept the headphones output as in older similar models. I won't use Bluetooth that much, but it's nice to know incase my cdg player stops working. 5

anyonymous	21/08/2024
[Tabletop] Perfect feature set for small gaming arcade. Modules allow configuration for all sources. 70v output perfect for distributed speaker system. 5

Heidi	11/07/2024
[35 lb] I had some issues with my receiver for my business and spoke with a very smart tech from B&H. She was very helpful and patient with my very limited knowledge of my equipment. She asked all the right questions and was able to suggest this much better amplifier that is much more suited to my needs. I would highly recommend this company. 5

JPLFENDER	22/05/2024
[35 lb] The JBL 208 is light enough to be portable and sounds great and easy to setup and operate. 5

anyonymous	18/05/2024
[1 dB Maximum] Basically plug-and-play excellent service 5

Sadik	16/05/2024
[35 lb] Very good Amplifier for PA System for all Businesses 5

Advantage	01/05/2024
[35 lb] You know what your getting when you order TOA. 5

Kiplinger Arena	29/04/2024
[Tabletop] Hopefully the amp will sound this great 5 years from now also, the humidity and dirt take a toll on electronic equiptment in the horse arena 5