The Sennheiser CL1 is an audio output cable with a right-angle 3.5mm mini connection and a locking 3.5mm mini connection. The cable is 20" in length and specifically designed for connecting the Evolution Series portable EK series receiver to a camera's audio input.

3.5mm Locking Connection from Receiver    3.5mm Right-Angle Connection to Camera    20" Length

Related Questions and Answers

Q: 1. Is this designed to work with my Sennheiser EW G4 receiver?

A: No the EW-DP Mounting plate is intended for the EW-D EK portable receiver and the manufacturer does not list any other units for compatibility.

Q: 2. Will this adapter allow me to connect a PS Embrace mic to a Sennheiser XSW transmitter?

A: No, that would not be possible. To be able to do that with a Point Source Embrace model, you would only need the one that is made for compatible with Sennheiser Evolution series transmitters like B&H # POEO8WLXSEBE for example.

Q: 3. Can the Sennheiser GA 3 accomodate two receivers _AND_ mount both antennas from both receivers on the front?

A: Yes, the Sennheiser GA 3 Rackmount Kit for EW G3 and G4 Series Wireless Receivers can hold one or two receivers with antennas attached to the receivers.

Q: 4. Can this adapter be used to connect a Lavignes Mic with the XLR connection directly to the G4 transmitter?

A: This cable is not appropriate for your needs, is for outputting from a wireless receiver to a camera or mixer. If you desire to connect a dynamic mic to a Sennheiser wireless transmitter, i would recommend using a Remote Audio CASENSK100XMC48 XLR Female to Locking 3.5mm TRS Male Adapter Cable (4'), BH #RECASEK100M.

Q: 5. Does anyone know where to find a longer version of this cable?

A: This type of output cable is meant to be short since the receiver it's connected to is usually on top of a camera or in an audio bag. If you need longer, you may need to look into a custom cable.

Q: 6. Is there a shorter version of this 20 inch cable that includes the locking ring on one end? Thanks

A: Yes, there are similar cables that are a shorter length than the 20" Sennheiser CL1. The Senal Right-Angle Locking 1/8" Mini to Right-Angle 1/8" Mini Output Cable (B&H # SEAWSCBLMINI) is 15" long, the Cable Techniques 3.5mm TRS to 3.5mm TRS Right-Angle Coiled Unbalanced Cable (B&H # CACTG3CC8U) is 8" long, and the Sennheiser CL 35 TRS Locking 3.5mm TRS to 3.5mm TRS Coiled Cable (B&H # SECL35TRS). Sennheiser does not provide any information about the length of the CL35 cable, but it is definitely much shorter than 20". Any of the options mentioned above will work as a replacement for the Sennheiser CL1 cable.

Q: 7. Will this mount one Sennheiser EW100G3 Receiver in a rack with the receiver's antennas mounted on the front of the rack next to the receiver?

A: Yes the Sennheiser GA 3 Rackmount Kit for EW G3 and G4 Series Wireless Receivers will hold one or two receivers.

Q: 8. Using this cable, can I run an audio signal from my Sennheiser G3 wireless receiver into my laptop?

A: yes, as long as you use have a program to capture it and the microphone plug in your laptop. The signal will work.

Q: 9. When I plug in more than two EW receivers, they don't boot up. Is there a higher output power supply we need to use for this?

A: The Sennheiser EW-D Power Distribution Cable (BH # SEWDPDC) shall only be used with the NT 12-35 CS power supply.

Q: 10. Will this one kit rack two of my wireless receivers?

A: The GA3 kit includes a joining plate that will allow you to mount 2 receivers side by side in a single rack space.