The Jason Cases Wheeled Protective Case for 6-Lens Zeiss CP.2 Set features a custom laser-cut foam interior specifically designed to hold up to six Zeiss CP.2 lenses. The black overlay provides an attractive case layout while protecting the underlying foam set within a Pelican 1610 hard case. The layout of the case interior protects your lenses during transport and storage.

The shell of the case is made of ultra-high-impact structural copolymer that makes it extremely strong and durable. It has a neoprene O-ring and four easy-open double-throw latches that seal perfectly. It also has a built-in automatic pressure equalization valve for changes in altitude or temperature. The case uses stainless steel hardware and has padlock protectors to provide added strength and extra security against cutting and theft. It is carried by three comfortable rubber overmolded haul handles, a retractable handle, and built-in wheels.

Laser-Cut Foam Interior    Black Overlay Protects Foam    Watertight, Dustproof Case    Made of Ultra-High-Impact Copolymer    Automatic Pressure Equalization Valve    Easy-Open Double-Throw Latches    Rubber Overmolded Haul Handles    Retractable Handle    Built-In Wheels    Lifetime Warranty on Case Exterior Shell

The high-grade, laser-cut foam stores any six Zeiss CP.2 lenses, including:

• Zeiss CP.2 15mm lens
• Zeiss CP.2 18mm lens
• Zeiss CP.2 21mm lens
• Zeiss CP.2 25mm lens
• Zeiss CP.2 28mm lens
• Zeiss CP.2 35mm lens
• Zeiss CP.2 50mm lens
• Zeiss CP.2 85mm lens
• Zeiss CP.2 100mm lens
• Zeiss CP.2 135mm lens

• Ultra-high-impact structural copolymer
• Open-cell core with solid wall design
• Easy-open double-throw latches
• Built-in automatic pressure equalization valve
• Padlock protectors
• Stainless steel hardware

• Top folding overmolded rubber haul handle
• Two overmolded rubber side haul handles
• Retractable extension handle
• Polyurethane wheels with stainless steel bearings

• IP67 (3.3' submersion for 30 minutes)
• Def Stan 81-41/STANAG 4280
• MIL-STD-810F

Related Questions and Answers

Q: 1. Can this box accomodate this kit? Bright Tangerine Viv Matte Box Kit 2 with Swing-Away Rod Clamp and Black Hole Donut B&H # BRVIVSAK (B&H Kit) https://www.bhphotovideo.com/c/product/1393587-REG/bright_tangerine_viv_matte_box_kit.html

A: According to Jason Cases this is able to accommodate the following list: Bright Tangerine VIV Mattebox Swing-away arm Reducer Rings 4″ x 5.65″ Filters Donuts Top Flag 15mm LWS adapter 15mm 12″ rods 15mm 18″ rods Extra accessory slot

Q: 2. Does this case have room for MIMIC controller?

A: Yes

Q: 3. Would the Rokinon Cine lens fit in this case also? I have a 14, 24, 35, and 85 Cine lenses but they are NOT DS.

A: So that we may best assist you, please email us at provideo@bhphoto.com.

Q: 4. Isn't it a bad idea for the stress on. the lens mount to travel the camera WITH the lens on?

A: We do recommend taking the lens off the camera when traveling. It can over time loosen the camera mount.

Q: 5. Is this a 1510 or 1610 case? The description lists both.

A: This case had outer dimensions of 22 x 14 x 9", meaning it is a 1510 case.

Q: 6. Is it possible to get this case with the red overlay?

A: I would imagine that Jason Cases would gladly do so. So that we may properly find out for you, please email your request. provideo@bhphoto.com.

Q: 7. Will this work with the 18-110

A: The FE PZ 28-135mm f/4 G OSS Lens is (W x H) 4.13 x 4.13 / 104.9 x 104.9 mm. The Sony E PZ 18-110mm f/4 G OSS Lens is (W x H) 4.3 x 4.3 / 109.2 x 109.2 mm. The 4mm difference we do not think will make a significant impact on the efficacy of the dividers in this case.

Q: 8. Does this case have roller wheels and a pull out handle?

A: Yes, the Jason Cases 6-Lens Protective Case for Sony CineAlta 4K Primes B&H # JASNALTA4KBK has roller wheels and a pull-out handle.

Q: 9. What's the size of the lens cutouts? What is the circumference of the lens compartment? Can it fit a lens with a 114mm front?

A: This case is designed specifically to handle the DS kit with 14, 24, 35, 50, 85 and 135mm lenses. https://bhpho.to/3sVbd6U

Q: 10. will it fit the cn-r's?

A: We have not been able to test this but the Canon CN-R lenses are a similar size to CN-E lenses and they should work in the Jason Cases Pelican Case for Canon CN-E 7-Lens Set.