Intended primarily for use with electric guitar, the Electro-Harmonix Crayon 69 Overdrive Pedal Bass Treble Controlsfrom Electro-Harmonix Crayon 69 Overdrive Pedal Bass Treble Controlsis a full-range overdrive pedal with bass and treble controls for adding more color to a wide variety of overdriven and distorted tones. It can add subtle dirt, and even lend some warmth to a single-coil pickup in the bridge position, emphasizing the treble range with a little buzz, and without ever sounding harsh—or even achieving a garage-rocky, dirty mid-boost by rolling back the levels of both bass and treble.

Four knobs are available for your control—Drive, Volume, Bass, and Treble. Drive dictates the amount of overdrive, Volume provides level control, and the other two shape the timbre of your sound. True bypass circuitry ensures that in bypass mode, your signal is truly unprocessed. The pedal sounds warm and lush on its own, but also plays well with other stompboxes on the board for stacking effects or when driving another overdrive pedal.

This is a mono pedal, with one 1/4” instrument input and one 1/4" instrument output. It runs on the included 9V battery, though it will also work with the separately available Electro-Harmonix 9.6 VDC 200mA power supply. The only difference between the Crayon 69 and the Crayon 76 is cosmetic, so choose whichever design best suits your look—or get both and use them together with different settings to complement each other.

Overdrive for Electric Guitar    Subtle Dirt, Heavy Lead Tones & More    Drive, Volume, Bass & Treble Controls    True Bypass Circuitry    Can Use to Drive Another Overdrive Pedal    9V Battery Included

GAIN Knob: This controls the amount of input gain. As you turn it clockwise, the overdrive ranges from just a touch of grit, in the fully counter-clockwise position, to classic distortion, in the fully clockwise setting.

VOL Knob: The control sets the output level of the Crayon. As VOL is turned clockwise, the output volume increases.

TREBLE Knob: As you turn TREBLE clockwise, the overdrive's high end is accentuated, making your tone brighter. Turn TREBLE counter-clockwise for a darker sound.

BASS Knob: As you turn BASS clockwise, the low end is boosted. Turn BASS counter-clockwise to reduce low end.

Related Questions and Answers

Q: 1. Hi. Please, what is the length of the rods?

A: According to manufacturer it is 39" long.

Q: 2. Can I use this with the Elinchrom Speedring for Rotalux Deep Octa Indirect 59" / 150 cm?

A: I don't believe that the indirect ring come off

Q: 3. is this compatible with 7th gen 2019 iPAD ?

A: Hi Robert! The Logitech Crayon is compatible with all iPads (2018 releases and later).

Q: 4. Will this fit the Sigma 16mm f/1.4 DC DN

A: Yes, Tilta lists the following measurement compatibility, for use with the Tilta Seamless Focus Gear Ring (69 to 71mm): "SIGMA 16mm f/1.4 DC DN * 69-71mm"

Q: 5. Will this hood fit to the 18-55mm lens of the Nikon D5100..??

A: I have a D5300. The Vello HB-69 is a clone of the Nikon HB-69. I went to the Nikon website and looked for the list of compatible lenses. Look at the lens model number on the front of the lens. Mine says: AF-S Nikkor 18-55mm 1:3.5-5.6GVRII.The Vello was suggested by the sales rep as a cheaper option at half the price. After comparing the build quality to a Nikon HB-34 I bought, I should have spent the extra $12.50 and bought the Nikon HB-69. The Vello is thinner plastic and the bayonet base has less heft.

Q: 6. You state this product is compatible with the new Ipad pro, but you need a lightning connector to charge. The new Ipad pro does not have a lightning connector. Does this come with an adapter for USB C?

A: The Logitech Crayon Digital Pencil for iPad BH #LODCPI does not include a USB Type C adapter.

Q: 7. Can I use this with Bowens type flash head?

A: Yes, since you have to buy the appropriate speed ring to use it with any flash head. For Bowens-S, you'll need this additionally: https://bhpho.to/39y8rOk

Q: 8. Will one of these fit the thicker part of the zoom ring on the canon RF 24-70 lens?

A: Yes. We highly suggest the following ring for best end-user performance Cool-Lux LuxGear Follow Focus Gear Ring (72 to 73.9mm) BH #COLG7273 • MFR #951416 https://www.bhphotovideo.com/c/search?q=Lux%20Gears&sts=ma

Q: 9. Will this gear fit the FOCUS RING on Zeiss Milvus 18mm f2.8?

A: Yes, the Tilta Seamless Focus Gear Ring (69 to 71mm) is the appropriate gear ring for the Zeiss Milvus 18mm f2.8 lens.

Q: 10. if you overdub something, how do you get the audio file out of the looper to use somewhere else?

A: Thank you for your question. The only way to remove a loop is to plug the audio output of this pedal and record it on to an external audio recorder or into a computer with an audio interface.