The Gitzo GT5533L Systematic Series 5 Carbon Fiber Tripodfrom Gitzo GT5533L Systematic Series 5 Carbon Fiber Tripodis a high capacity carbon fiber tripod that represents the ultimate goals of the Systematic lineup—minimal weight, durability, and uncompromising stability. For those looking for the most stable support system possible, the Series 5 is designed to hold up to some of the most demanding setups with a large top casting and excellent stability.

Within the Series 5 line the GT5533L is given the "Long" designation as it can extend from a minimum height of 3.9", to a maximum height of 57.1", all while maintaining an impressive weight capacity of 92.6 lb. Incorporating Gitzo's patented carbon eXact tubing, the GT5533L sports maximum rigidity while keeping its weight to an absolute minimum. Weighing just 5.8 lb allows the tripod it be easily carried or transported in the studio or out in the field. It's folded length of just 26.8" makes storing or travelling with the tripod easy and convenient.

The Systematic line also features an array of unique, patented, and useful features which set a standard for professional quality. The key design element of the series is the use of Gitzo's Carbon eXact tubes which are extremely rigid despite their lightweight design. The carbon tubing is complimented by Gitzo's G-Lock Ultra twist-locks which maintain stable, solid connections between leg sections and prevent joint damage by blocking out dirt, dust, and moisture. Each leg on the tripod features a 50mm rubber articulating foot, providing a stable and versatile base for setting the tripod on most surfaces. If required, the feet may be removed and replaced with optional metal spikes for increased stability in sand, dirt, mud, snow, and ice. The base of the tripod also features a 3/8"-16 Easy Link attachment thread, allowing the user to connect a variety of accessories to the tripod including magic arms, shoe adapters, LED lights, monitors, and more.

Load Capacity: 92.6 lb    Max Height: 57.1"    Min Height: 3.9"    Folded Length: 26.8"    Leg Sections: 3    Weight: 5.8 lb    Carbon eXact Tubes    G-Lock Ultra Twist Locks    50mm Rubber Feet    Easy Link Attachment Thread

Related Questions and Answers

Q: 1. Can the Gitzo GT 3533 LS be used with the Wimberley WH -200 Gimbal Tripod Head ll when mounted with the AFS Nikon 600 mm ED VR Lens?

A: Yes, it would make a good tripod for birding/wildlife. Depending on your needs, you could also consider a series 4, which would be heavier but also slightly stiffer. https://bhpho.to/2YySIYP

Q: 2. What is the country of origin?

A: country of origin is Italy

Q: 3. Does the GT3543LS include a set of regular rubber feet or just the articulating feet?

A: These Gitzo Tripods comes fitted with the big articulating feet. However, this can be replaced with the included regular rubber feet. This regular feet comes together with the tripod. However the spiked feet does not and must be purchased separately.

Q: 4. Is there lateral arm that works with this tripod? or a right angle bracket like the one for the Systematic Series 5

A: You can use the Gitzo bracket with this tripod and then get a series 4 or 5 center column or you can purchase any lateral arm. Click the link below to view; https://www.bhphotovideo.com/c/buy/Arms/ci/10829/N/4075788750

Q: 5. Is there an accessory plate to accept a column? I had an older version of this size tripod and like that fact I can so some finer height adjustments.

A: There is a center column available for the 5563, you can click on the link below to view; https://www.bhphotovideo.com/c/product/1286945-REG/gitzo_gigs5513s_rapid_center_column.html

Q: 6. is there a center column on this tripod? Will it work with an RRS BH-40 ball head ?

A: No, there is no center column on this tripod. Yeap, it would work well with the BH-40 ballhead. I'd also consider the BH-55 if you're not averse to the size difference between them.

Q: 7. Can I replace one of the legs on this tripod. Mine is stuck and wont unscrew.Not sure if some sand got stuck in it. Can I order a replacement and where? Thanks

A: It is easy to remove a single leg by removing the hex screw at the top. Presumably it is possible to get a single leg replacement direct from Gitzo.If it is just the telescope part of the leg that is stuck it may be possible to loosen it with liberal use of penetrating oil such as WD40 or Lusol, then apply a reasonable amount of force to undo the locking collar. James

Q: 8. My Benro geared head doesn't fit on the mounting plate. Is there a way to make that work with an accessory?

A: In theory, it should screw on without issue. There is likely more to the problem and we would recommend to reach out via virtual live-chat and we can video conference to help you solve your issues!

Q: 9. What is the working height when the legs are fully extended except for the smallest diameter leg section?

A: It is 46 high to the top of the ball head mount with all but the smallest legs extended. With ball head mount it is 49.50 to where the telescope mounts. Hope this helps.

Q: 10. Can we use manfrotto ball/ joystick head with this tripod?

A: Yes, actually any head will work as long as the female thread on the bottom of the head is 3/8", which is nearly all heads.