The BlueFox3 USB3 Vision Camera 3.2MP 119Hz Color 12-Pin I/Ofrom BlueFox3 USB3 Vision Camera 3.2MP 119Hz Color 12-Pin I/Ois an area scan machine vision camera for inspecting products on assembly lines, gauging and measuring quality, inspecting defects, label inspection on bottles, and more. It allows you to get a physical image of a product onto the computer in two-dimensional space and measure accuracy/inaccuracy by counting the number of pixels. Featuring a C-mount lens mount, the BlueFox3 supports any C-mount lens, including a wide range of MATRIX VISION telecentric lenses. MATRIX VISION is part of the AIA Machine Vision Trade Association.

This version of the camera features a 3.2MP, 1/1.8" sensor, 119 Hz frame rate, on-board color processing, and a 12-pin I/O connector on the back for power input, trigger input, and trigger output. (An optional Hirose cable, such as model # RTKS-BCX-HR12-05.0, is required for the I/O connection). The camera captures images at a resolution of 2064 x 1544 but also allows for area of interest selection, as well as binning, and decimation via software. This high frame rate version also has a burst mode function that buffers the acquired images and decouples the acquisition from the image output, allowing the sensor's maximum frame rate to be used independently of the available bandwidth.

The camera has large RAM and FPGA (field-programmable) integrated boards that provide for reliable processing and customization. The FPGA board reduces the CPU load and allows for more functions to be added. The camera also has a fully GenICam compliant mvIMPACT SDK that enables even more flexibility -- complete documentation of the SDK gives you access to many special camera features that could simplify your vision system development. The camera's driver is also compatible with a wide range of 3rd-party software, including those from Halcon, Matlab, and Labview.

Area Scan Machine Vision Camera    3.2MP 1/1.8" Sensor, Global Shutter    Up to 2064 x 1544 Resolution    3.45μm Pixel Size    119 Hz Frame Rate    High Frame Rate Burst Mode    On-Board Color Processing    12-Pin Hirose I/O Connector    GenICam Compliant mvIMPACT SDK    Member of AIA Machine Vision Association

Area scan machine vision camera

3.2MP, 1/1.8" Sony Pregius IMX252 CMOS sensor with a global shutter

2064 x 1544 resolution (with area of interest selection, binning, and decimation)

3.45μm pixel size

119 Hz frame rate (with burst mode)

On-board color processing

12-pin I/O connector for power input, trigger input, and trigger output

C-mount lens mount

USB 3.0 interface

Large RAM and FPGA boards

GenICam compliant mvIMPACT SDK

Driver is compatible with many 3rd-party software

Counter and timers

Sequence recording using parameter sets

Event notifications

Support for additional information via data streams

Integrated IR cut filter

Member of AIA Machine Vision Trade Association

TC, TCCR, TCSM, TCLWD, TCCX, TCCXQ, TCZR, TCBENCH, TCCRBENCH, TCEDGEVIS, PC, PCCD, PCHI, PCBP, PCPW, PCMP, TCCAGE, MC, MC3-03X, MCSM, MCZR, MZMT12X, ENMT, ENMP, ENHR, ENVF

Related Questions and Answers

Q: 1. What size/shape of backing box ( wall box ) is recommended for installation?

A: The Lorex LNZ44P12B 4MP Outdoor PTZ Network Dome Camera with Color Night Vision BH #LOLNZ44P12B would work with a strongly constructed back box approximately 6' x 8' rectangular shape. This camera weighs in at about 7 lbs.

Q: 2. Does this camera support video over RTSP or RTMP?

A: This camera does not support RTSP or RTMP.

Q: 3. Can this model write to the SD card reader on the camera?

A: This camera does not offer edge recording to a memory card. It has no memory card reader.

Q: 4. From an Amira to MSU-1, does this cable provide power?

A: For questions regarding Arri cameras please reach out to our Studio Sales team at TheStudio@BHPhoto.com

Q: 5. Does this camera follows movement?

A: Lorex LNZ44P12B 4MP Outdoor PTZ Network Dome Camera with Color Night Vision does not track.

Q: 6. Does this camera support RTMP?

A: The Lorex LNZ44P12B 4MP Outdoor PTZ Network Dome Camera with Color Night Vision BH #LOLNZ44P12B does not support RTMP

Q: 7. Can you use this cable to power a teradek bolt 500 xt and teradek bolt 500 HDMI Lt? Or do you have to use the cable that teradek makes?

A: yes this cable can be used to power the Teradek Bolt 300/500/600/Sidekick II

Q: 8. Is the Lorex LNZ44P4B camera compatible with the Lorex LNR616X4T 16-Channel 4K UHD NVR with 4TB HDD BH #LOLNR616X4T MFR #LNR616X4T?

A: Per Lorex, the Lorex LNZ44P4B 4MP Outdoor PTZ Network Dome Camera with Color Night Vision BH #LOLNZ44P4B is compatible with the Lorex LNR616X4T 16-Channel 4K UHD NVR with 4TB HDD BH #LOLNR616X4T.

Q: 9. Are the IR lights visible?

A: Yes they are low glow IR LEDs

Q: 10. Can this camera's setting be changed to 1920x1080 at 60 fps?

A: The Lorex LNZ44P12B 4MP Outdoor PTZ Network Dome Camera with Color Night Vision can support 2mp but the framerate would still be max 30p.