The 220V Da-Lite 92638ELVN Contour Electrol 65x116 Motorized Screen 220Vfrom Da-Lite 92638ELVN Contour Electrol 65x116 Motorized Screen 220Vis ceiling- or wall-mountable, offering simple installation.

133" Diagonal / 16:9 Aspect Ratio    High Contrast Matte White Surface    1.1 Gain / 100° Viewing Angle    Specify Veneer When Ordering    Low Voltage Control (LVC)

High Contrast Matte White is a fiberglass surface with a gray base for deeper reproductions of black, which improves contrast. It is for non-high-definition projection and environments with moderate ambient light. Cone: 100° Gain: 1.1

• Decora-style, three-button wall switch
• Black backing retains projected brightness
• Seamless screen surface

This screen can be ordered with any of the Da-Lite veneer options. Please specify which option you would like when ordering

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. Will this work with the remote wireless flash signal produced by the OMD EM-10?

A: I'm unfamiliar with that specific wireless trigger system, but I have used two different wireless triggers with this light kit successfully. As long as the trigger uses a 1/8 mono plug, you should be fine. If not, you can buy adapters to make these things work.

Q: 2. I have Leica V lux typ 114, how can I connect them with my camera?

A: You may use the Vello Universal Hot Shoe Adapter for PC Connection B&H # VEHSAPCU to connected the provided sync cable with this Impact kit to your Leica V-Lux Typ 114. Please see the image for reference.

Q: 3. Does dimming this using an inline dimmer cause an audible hum? I'm trying to get new lights that don't do that. I know I can use scrims too, but I'd like the flexibility if possible. Thanks!

A: You're missing the point of these lamps. If you want to dim it, the best thing is the scrims. They are very effective. In addition, if you are opposed to using scrims for some reason, you have the option of pulling the bulb back. If you need more focus than when it is flooding, you can use barn doors, which you probably want any way. Finally, you can also use a 300W bulb instead of a 650W.

Q: 4. what is the power source?

A: The lights include a 120VAC power cord which is a regular USA household plug.

Q: 5. Can these lights be on for a full shoot, or are they flash/strobe only? Looking to purchase something inexpensive for filming purpose, and won't need the flash setting.

A: You could use the modeling lights for filming but it's probably cheaper to just by led modeling lights with more wattage. I think the modeling lights on this kit is about 60 watts. Modeling lights are used to see the lighting and to help your camera focus on the subject.

Q: 6. I have a Pentax K3II and a Sigma 610 DG Super flash. I want to know how to do to be able to connect a flash strobe kit through a radio trigger. Which ones would be compatible for my K3II in order to be able to make the strobes functional and, if possible, also to use the Sigma? What do you recommend buying in addition to this kit?

A: I would recommend purchasing the Vello FreeWave LR Kit with 2 Receivers, B&H # VERFWLRK, for your usage needs. The Impact Two Monolight Kit (220V), B&H # IMEX100A2LKX, has a 1/8 (3.5mm) miniphone sync terminal on the rear of the strobe monolight. The Vello FreeWave LR Kit comes with a miniphone to miniphone cable, so you may connect the Vello FreeWave LR receiver to the Impact monolight. The receiver also has a hot shoe on the top of the unit, onto which you may mount the Sigma EF 610 DG Super Flash. As the kit I listed above comes with two receivers, you may connect one receiver to the Sigma EF 610 DG Super Flash, and one to one of the monolights in the Impact monolight kit. As the Impact monolights have built-in optical slaves, the unit without the Vello receiver will trigger when it sees the light output from the light fixture with the receiver. Do note the output of the Sigma EF 610 DG Super Flash will have to be set manually when using this setup. There is no option that will work and retain TTL automatic flash capability with this setup.

Q: 7. My flash tube broke. Is that covered in the one year warranty ?

A: Unfortunately, the warranty for this monolight only covers defects in the unit as a whole. It does not cover lamps.

Q: 8. Are there two lights included with this unit. Are the lights 5600K?

A: Yes, the kit comes with two Impact One Monolights. They are strobe type lights and are daylight rated.Note the camera you use this with needs to have a sync port or you will need to get an adapter or wireless sync.And this is made for still photos not video.

Q: 9. What kind of slave/remote unit is best for the strobes with a small budget?

A: A good radio trigger option on a small budget that is compatible with this monolight kit is the Impact PowerSync16 DC Radio Slave System. Please see the image below for reference.

Q: 10. Are there also soft boxes included?(:

A: Comes with two soft boxes. I bought with two umbrellas as well, which I used shooting 141 head and shoulders photos on my first assignment. Everything but the synch cord worked perfectly.