The ADN-W AM antenna module is designed to ensure reliable wireless bidirectional communication with the wireless conference units in both the 2.4 GHz and the 5 GHz frequency band. The antenna module easily connects to the central unit via the bus cable. The ADN-W AM features a built-in mounting thread, that allows easy mounting on walls or ceilings.

• Automatic frequency selection mode
• Rugged metal housing
• Powered via bus or DC power supply
• AES 128-bit encryption

Related Questions and Answers

Q: 1. Can these be used with the Pyro S TX and RX?

A: Hollyland does not recommend using the Hollyland 2.4 & 5 GHz Thumb Antenna for Pyro 7 (2-Pack) with the Pyro S. They recommend using the following antenna for the Pyro S. Hollyland Paddle Antenna for Pyro Series (2.4/5 GHz) BH #HOHLATN14

Q: 2. Does anyone know if this provides power to Lavs like the the Cos-11 that require power?

A: While I have not tried it with this particular Lav, Sennheiser did say that this systems wiring scheme is identical to the Sennheiser EW Evolution wireless and is compatible with all mics that are wired for the Evolution wireless.

Q: 3. Is this better than the BoomX-U?

A: Neither unit is better than the other. This unit works in the 2.4ghz range and slightly simpler to pair, while the BoomX-U is based in the UHF frequency range. The X-D would be great for close range quick setups, will the X-U would be great for longer distance interviews in a challenging wi-fi environment.

Q: 4. Could you use this on a computer (headphone jack) for a zoom meeting? The presenter is at the front of the room and the computer at the back say 40 feet away.

A: You can use this on a computer only if it has a mic jack. A Headphone jack is only for headphones.

Q: 5. Can I attach the Android version to a phone even if there is a case on?

A: It really depends on the case you have and how much access you have to the phone's USB-C port. The UC receiver does need to be plugged in all the way in order to function properly. It was designed to be flush mounted to the phone so it's easy to use when you're moving around. If you do need to keep the phone inside a case that prevent full access to the USB-C port, you can try a USB-C extender like the IOGEAR USB Type-C Male to Female Adapter - 1' (B&H #IOG2LU3CMF). Keep in mind that this is not how the receiver was intended to attach, so consider using hook-and-look fastener (velcro) to secure the UC receiver onto the back of your phone's case. But the best way to assure that the wireless mic system works properly and to avoid damage is to attach the receiver directly to the phone without an adapter, just as it was designed to be used.

Q: 6. How to charge the units?

A: These can be charged via USB with the included USB C cable.

Q: 7. Can I use any Lav mic on this transmitter?

A: If your Lav is a Sennheiser (or other brand) that is wired for the Evolution EW series - usually with the locking mini connector, it will work perfectly with this system as well.

Q: 8. Does the receiver have an SD card slot or a way to store the files without going through a camera or phone?

A: The receiver does not record audio files by itself. To record audio without a camera or phone, you plug this system into an external audio recorder, and record to an SD card, such as this B&H # ZOH1N.

Q: 9. The B&H spec says output is 1/8" TRS line-level unbalanced. However unbalanced is normally only 2 conductors (TS) not TRS right? Can anyone clarify the wiring of the output connector? Sennheiser's site and manual are useless in this regard.

A: Tip = hot Ring and Sleeve are shorted for sheild.

Q: 10. Does this have phantom power?

A: No this receiver can not provide phantom power, it was designed to be used with dynamic microphones that don't require phantom power or with microphones that can be battery powered.