Aja Lc 3G Fiber Transmitter Sfp Multi-Mode

Aja Lc 3g Fiber Transmitter Sfp Multi-mode

Product Code: eq41167
Availability: In Stock

$1,125.00 $1,710.00

Qty

7 reviews Write a review

Description
Reviews (7)

AJA LC 3G Fiber Transmitter SFP Multi-Modeis intended for installation in AJA's FiDO hardware to enable fiber-optic connections. This single-channel SFP reciever is designed to be paired with the AJA FiDO-T Mini-Converter.

SFP Module for FiDO Mini-Converters

Parameters
Form Factor	SFP
Packaging Info
Package Weight	0.05 lb
Box Dimensions (LxWxH)	6.6 x 4.5 x 0.6"

Related Questions and Answers

Q: 1. Does this work with the Serv 4K? It's not listed but I assume it does.

A: The Node II LTE/4G/3G Multi-Mode Modem Module from Teradek is designed specifically to interface with the Teradek VidiU Go. The Teradek SERV 4K is not listed.

Q: 2. Hi all, can this converter convert from HD to SD?

A: The answer is no it can't, it only converts the format that you plug into it

Q: 3. What km distance is this SFP rated for?

A: The FieldCast 3G Video SFP Optical Fiber Transceiver would support a range of 15km.

Q: 4. What type of Fibre-Optic cable does this use? One with LC connectors?

A: Blackmagic Design fiber products use singlemode duplex cable with LC connectors. An example cable would be a href= http://www.bhphotovideo.com/c/product/992948-REG/hybrid_fiber_systems_smd9_lc_lc_030_9u_125u_singlemode_duplex_lc.html target= _blank http://www.bhphotovideo.com/c/product/992948-REG/hybrid_fiber_systems_smd9_lc_lc_030_9u_125u_singlemode_duplex_lc.html/a

Q: 5. Is it neccessary to use an attenuator for very short runs (50m) or does anyone know the receiver overload power?

A: No you should not need to use anything like an attenuator when using the Blackmagic Design 3G SFP Optical Module.

Q: 6. Please answer question 2 by identifying compatible optical cables for this module. BH #UBACDASFP103?

A: The Ubiquiti Networks UACC-OM-MM-10G-D 10G SFP+ Multi-Mode Optical Module (2-Pack) uses multimode LC fiber optic cables, like the Ubiquiti Networks Multimode LC Fiber Optic Patch Cable (9.8', Aqua), B&H # UBUOC3.

Q: 7. Hello. I have four blackmagic 4k tv studio cameras, a 40x40 blackmagic hub, and a Atem 2 blackmagic switcher. To use the full capabily conection what more i need? Tahan you

A: If you are asking about fiber connections from the Studio Camera to the ATEM switcher, you would need the ATEM Talkback Converter which will convert fiber to SDI at the studio end. Also this will provide talkback to your cameras.

Q: 8. Can I take my existing simplex SC/APC terminated fiber, convert it to simplex LC connector and use this product for input?

A: Yes, that should be possible.

Q: 9. This module support SFP+ nic card ?

A: Yes, this Ubiquiti Networks UACC-OM-MM-10G-D 10G SFP+ Multi-Mode Optical Module does support SFP+.

Q: 10. Will this work for the Aja Fido TR?

A: We have not tested the FieldCast 3G Video SFP Optical Fiber Transceiver with the AJA Fido Transmitters. However, it should work. AJA has there own SFP solutions that we would recommend using. AJA Single Multi-Mode LC 3G Fiber Transmitter SFP BH #AJFIBRLC1TXM • MFR #FIBERLC-1TX-MM

John	05/09/2024
[0.05 lb] this is the 3 one that I have bought and it does exactly whats it suppose to and pretty rugged too 5

Joel	29/08/2024
[0.05 lb] Must have broadcast solution for me for GoPro and Computer outputs. 5

mizzourc	21/08/2024
[0.05 lb] Like all AJA adapters, this one does exactly what it says it will. 5

james	08/07/2024
[0.05 lb] They are built to be tough and it is all I trust for HD through SDI 5

Lance	24/06/2024
[0.05 lb] After a really long search I finally found a box that will allow me to run GoPros over a long 50 foot SDI cable at 1080p 30 and 60 fps for live streaming. The ATEM did not want to except the Go Pro over HDMI cat 5 extender or AVUE hdmi to sdi converter. I believe it goes into the ATEM at 1080i from the AJA which is why the others were not working as they ouput 1080p though I can't really put my finger on it as my Nikon D5200 worked with the other boxes just not the Go Pro, but HURRAY IT WORKS!!!! I am wondering if Go Pros work with the new Black Magic 4k HDMI to SDI mini converter and the ATEM TV as I don't think they work with the older Black Magic converter going into a ATEM TV, they are a bit cheaper than the AJA. Please let me know if anyone has tested a GO PRO and the Black Magic 4k miniconverter HDMI to SDI converter into the ATEM TV. Cheers! 5

Grant	15/06/2024
[SFP] I have purchased 1 set of these to replace coax SDI lines we needed to remove in favor of fiber. So far my initial tests are good. We are just using it for HD-SDI, but If they continue to work, I will purchase another set and this will give us 6 transmit and 6 receive signals on each end of our link using 4 strands of single mode fiber. They are virtually silent except a small fan on the side and use locking screw on power cables which is nice to prevent loss of power from a connector getting pulled out. Also they are VERY small and compact. We will use heavy duty Velcro to hold them on a rack shelf long term. You can't beat that capacity for the price. 5