This ProMediaGear TR343L 34mm Carbon-Fiber Tripod with Top Platefrom ProMediaGear TR343L 34mm Carbon-Fiber Tripod with Top Platesupports up to 60.0 lb, measures 25.1" when folded, and includes a tripod top plate with a 3/8"-16 mount. Each of its 3-section legs has a maximum diameter of 34mm. They also feature an independent spread, a 3-position angle lock, quarter-turn twist locks for rapid deployment, and a rubber foot to enhance stability on a wide variety of surfaces. Together, the three legs can be extended and spread to raise the tripod from a minimum height of 3.8" to a maximum height of 59.3". For use on soft and uneven soil, each of the rubber feet can be unscrewed to access a stow-away metal spike which can be fastened to the bottom of its corresponding foot.

Tripod heads, cameras, lenses, or sport optics that are compatible with a 3/8"-16 mount can be connected to the tripod's removable top plate, which is secured to the tripod's aluminum-alloy apex using six socket screws. The aluminum-alloy apex minimizes weight along with the carbon-fiber construction of the tripod legs.

Alternatively, a separately-available ProMediaGear TRBU75 75mm Tripod Leveling Base with a separately-available TRB3475 75mm Tripod Bowl Insert can be installed within the aluminum-alloy apex. A video tripod head that is directly compatible with the TRB3475 tripod bowl insert or the TRBU75 tripod leveling base's 3/8"-16 mount can be used with the TR343L 34mm Series 59" Pro-Stix Carbon-Fiber Tripod and oriented without adjusting the tripod's legs.

For direct attachment of accessories that feature 1/4"-20 mounts such as the included bubble level, three 1/4"-20 female accessory threads are distributed along the sides of the apex. Alongside each of those 1/4"-20 accessory threads are pin slots that allow them to accommodate ProMediaGear accessories with anti-twist pins, or accessories with only a 1/4"-20 mount. To enhance stability, the underside of the top plate features an accessory loop which can accommodate the included carabiner along with a separately-available ballast such as a sandbag.

Load Capacity: 60.0 lb    Max Height: 59.3", Min Height: 3.8"    Folded Length: 25.1"    Leg Sections: 3, Weight: 3.9 lb    Carbon-Fiber Legs, 1/4-Turn Twist Locks    Rubber Feet with Stow-Away, Metal Spikes    Bubble Level, Top Plate    Aluminum-Alloy Apex    Three 1/4"-20 Female Accessory Threads    Six Anti-Twist Pin Slots

• Supports up to 60.0 lb
• Tripod heads, cameras, lenses, or sport optics that are compatible with a 3/8"-16 mount can be connected to the included tripod top plate, which is secured to the tripod's apex using six socket screws
• Alternatively, tripod accepts a separately-available ProMediaGear TRBU75 75mm Tripod Leveling Base with separately-available TRB3475 75mm Tripod Bowl Insert
• A video tripod head that is directly compatible with a separately-available ProMediaGear TRB3475 75mm Tripod Bowl Insert or the 3/8"-16 mount of the separately-available TRBU75 75mm Tripod Leveling Base can be used with the tripod and oriented without adjusting the tripod's legs
• Can be set for a minimum height of 3.8" to a maximum height of 59.3"
• Legs each feature 3 sections, twist locks for rapid deployment, and can be independently spread
• Legs can be locked at 22.5°, 55.0°, or 89.0° angles
• Rubber feet with stow-away, metal spikes to further enhance stability on a wide variety of surfaces, including soft and uneven soil
• Included tripod bubble level
• For direct attachment of accessories that feature 1/4"-20 mounts, three 1/4"-20 female accessory threads distributed along the sides of the apex
• 1/4"-20 accessory threads along the apex have adjacent pin slots that allow them to accommodate ProMediaGear accessories with anti-twist pins, or accessories with only a 1/4"-20 mount
• Underside of the top plate features an accessory loop which can accommodate the included carabiner along with a separately-available ballast such as a sandbag
• Weighs 3.9 lb, measures 25.1" when folded
• 5/32 hex key to adjust tension on leg hinges and for removal or installation of tripod top plate

• Carbon-fiber legs with a maximum diameter of 34mm
• Aluminum-alloy tripod apex helps minimize weight

Related Questions and Answers

Q: 1. At full length the tripod is 59.3". What is the height of this tripod with the lower-most section of legs NOT deployed?

A: That height would be 44.75 inches. Each section is approx 15 inches. Best regards Tom Promediagear.com

Q: 2. Hi, I am 6'3" and I am wondering if I should get the tallest one? 6.7-77. Thank you in advance

A: In general I recommend that your tripod should be at least within 9 inches of your height. So a tripod and head that goes to 66 inches or more is best.

Q: 3. How do I reverse the 1/4 to 3/8 inch stud?

A: A bushing is needed to be put in place. Please review the following item. Sunwayfoto Stainless Steel 1/4" to 3/8" Tripod Adapter/Bushing (Set of 5) BH #SUTN1X5 • MFR #TN-1X5 https://bhpho.to/3qYKec5

Q: 4. is this compatible with the ProMediaGear TR424 42mm-Series...or is there another product that will?

A: The ProMediaGear 34 Series Carbon Fiber Tripod Center Column with 3/8" Mounting Stud and Ballast Hook is not compatible with the ProMediaGear TR424 42mm-Series. The TR42C Carbon Fiber Center Column for 42 Series Tripods is compatible with it. Unfortunately, B&H does not carry it at this time. I will email B&H management to see if it can be carried. It is listed here: https://bhpho.to/4enzbzZ

Q: 5. Can I use the Really Right Stuff ball head with this tripod?

A: Yes, you can mount any Really Right Stuff head on this BT Precision Tripod.

Q: 6. OConnor 60L 2-Stage is this item included mid spreader?

A: No, the mid-level spreader is not included. OConnor Mid-Level Spreader for 30L & 60L Tripods https://www.bhphotovideo.com/c/product/868376-REG/oconnor_c1252_0001_mid_level_spreader_for.html

Q: 7. What is the folded diameter?

A: The widest folded diameter would be at the head which would be 5".

Q: 8. Would this fit the older model Shape matte box #MAT4X56 ?

A: No, the SHAPE Carbon Fiber Top Flag for AKS Series cannot accommodate the SHAPE 2-Stage 4 x 5.6" Clip-On and 15mm LWS Rod-Mounted Matte Box.

Q: 9. Is the foot replaceable with other 3/8 foot accessories?

A: As the ProMediaGear TR42ML Carbon Fiber Monopod with Arca-Type Clamp has a 3/8"-16 mount on the bottom of the monopod's foot, yes, it should be compatible for use with other 3/8"-16 foot accessories.

Q: 10. What are the tube diameters on the 75.4" monopod?

A: The diameters of the ProMediaGear TRM34ML Carbon Fiber Monopod with Standard Mount are 34mm-30mm-26mm.