VariZoom VZQJ-CPM5 QuickJib Crane & Micro K5 Remote Headis an affordable, high-performance jib kit for cameras weighing up to 30 lbs (13.6kg). This professional, no-tools jib arm system assembles safely and quickly, extending to nearly 14 feet (4.26m). Portable and compact, the QuickJib attaches to the custom TCR100 crane tripod, which fits perfectly into the heavy-duty DC100 adjustable dolly. You're ready to roam! The perfect combo of quality and economy, this QuickJib system will provide years of reliable operation, whether indoors, outside, or in the studio.

The QuickJib selectively uses industrial powder coating and anodizing for optimal component performance, with stainless steel fasteners throughout (as opposed to lesser, cheaper zinc-plated fasteners). The slim QuickJib outperforms the competition by having 50% less air resistance in breezy conditions than jibs utilizing a four-arm support system.

Brake system utilizes a heavy-duty plate that is securely mounted to the pivot section. Brake compression system is built into a stator and designed to compress firmly and securely, while remaining forgiving enough to slide under extreme force that might otherwise topple a locking-brake jib system.

Locking stainless aircraft pins of the highest quality and strength are used at the pivot points, and they are attached by lanyard to prevent them from ever being lost.

Camera platform and tilt base join to the jib arm with stainless aircraft pins that insert through sealed radial ball bearings at the tilt base and high-performance sleeve bearings at the camera platform, resulting in silent, smooth motion. The camera platform also has a built-in spirit level for quick reference and adjustment. Paired with an optional Zero Gravity head, you have a professional manual overhead jib.

Telescoping weight arm adjusts up to 3 feet for tremendous flexibility. Extend the arm to reduce the amount of weight needed, shorten it to work in tighter spaces, or simply adjust it to fine-tune the counterbalance.

This custom-built crane tripod is the only tripod VariZoom recommends for use with any crane, no matter the brand. We recommend you never use a telescoping or collapsible tripod under a crane, no matter how small. When supporting an expensive camera on a jib elevated above other valuable equipment or people, it's simply common sense to eliminate all risk and use a single-section tripod instead of a telescoping one.

The TCR100 was designed with safety and strength in mind, combining a solid machined base-plate (not molded), specialty heavy-gauge tubing, and oversize leveling feet for an ultra-stable design that will never falter or fail. With anodized aluminum, stainless steel fasteners and solid brass bushings, the TCR100 will last a lifetime.

VariZoom's heavy-duty dolly has an ample spread and a positive leg-locking system that securely captures the TCR100 crane tripod.

Related Questions and Answers

Q: 1. Does this work with Canon G50 or similar LANC style remote controlled cameras?

A: You most certainly will be able to use a camcorder like the G50 on this jib. However the remote included will not control the zoom on the camera. You would just need to add an additional LANC controller and extension cable for that. Varizoom Controller - https://bhpho.to/2l5fHGu Extension cable - https://bhpho.to/2Jc1iDl

Q: 2. "Except for full motion control capability, the Jibstick Jr manual kit has all of the electromechanical performance of other kits." What does this mean? Does it come with the ability to pan and tilt? The line "except for full motion control" gives me the impression that pan and tilt ability are limited in some way?

A: According to VariZoom, full motion control means repeatability, being able to stop and start in the same programmed position, know where the head is, or repeat actions over and over. This kit has the same pan and tilt capability as the others, but the controller has no positional data, so it is a live manual controller only with speed and smoothing control. Also does not have built-in lens control.

Q: 3. What is a good track to use with this crane?

A: The dolly on this unit does not have track options. It is designed for transport.

Q: 4. How wide is the base of the dolly?

A: The width of the VariZoom VZ-D100 Heavy Duty Dolly for Jibs is about 39 inches.

Q: 5. Does this come with the motorized head for the crane?

A: No, the version with the motorized head is VASC12100.

Q: 6. Is this product the full jib set?

A: This is a complete kit. Just add a camera, a monitor and their cables.

Q: 7. Could this hold an Alexa Mini with batteries,monitor, cage and a follow focus?

A: Yes, the VariZoom VZQUICKJIB QuickJib can hold camera builds up to 50 lb, such as a fully built ARRI ALEXA Mini when using the proper counterbalance of weight. Please note that you will need either a compatible fluid head or motorized pan and tilt head to mount a camera to the jib. These items will need to be included when determining your max weight.

Q: 8. What size tripod head works on this jib? 75mm?

A: Unfortunately, that specification is not explicitly defined by manufacturer at this time.

Q: 9. What is the horizontal reach of this crane?

A: 9'6" - 13'9" (2.9 - 4.2m)

Q: 10. Would this kit handle a small camera (Sony PXW-X200) and teleprompter assuming the combined weight is below stated limit. Will it be able to balance with the prompter on? Thanks!

A: We must admit not hearing about using a teleprompter on a crane before. But that is not to say it cannot work. In certain situations it may be the perfect or only solution. That being said, we have the opinion that since the Sony PXW-X200 weighs 10 lbs and the payload of the VariZoom QuickJib Kit is 50 lbs, as long as the teleprompter is less than 40 lbs, you will be good. There may be an outside chance the baseplate cannot go back far enough to balance. In that case, a longer base plate would solve the problem.