The beige, 100-pack of Rycote Overcovers Advanced Fur Discs for Lavalier Micsfrom Rycote Overcovers Advanced Fur Discs for Lavalier Micsis specifically designed for use with small personal microphones in windy outdoor conditions. Using the stickies (sold separately) to affix a lavalier mic onto the skin or on top of clothing, overcovers include a fur windjammer that can be affixed on top of the lav microphone, delivering excellent wind-noise protection.

Suitable for Lavalier Microphones    High-Quality Fur (No Stickies)    Provides Wind-Noise Protection

Related Questions and Answers

Q: 1. Hi Works with MKH 8060 +MZF 8000 filter? Thanks!!! Renzo

A: No, The Rycote 010320 Super-Shield Kit for Shotgun Mics (Small) is for shotgun microphones up to 200mm long and it will not be able to accommodate the Sennheiser MKH 8060 when combined with the Sennheiser MZF 8000. The MKH 8060 is 178mm long and the MZF 8000 is 29mm long, which is 207mm when used together. Instead of the small Rycote Super-Shield, you can use the Rycote 010321 Super-Shield Kit for Shotgun Mics - Medium (B&H # RYSSKM) which accommodates mics that are 200 to 250mm long.

Q: 2. Will my sennheiser 416 fit ?

A: The correct model of Super-Shield for the MKH416 is the Medium (MFR # 010321): a href= http://www.bhphotovideo.com/c/product/1044548-REG/rycote_010321_super_shield_kit_medium.html target= _blank http://www.bhphotovideo.com/c/product/1044548-REG/rycote_010321_super_shield_kit_medium.html/a

Q: 3. I have the Rode NTG3B which is 10 inches. Should I get the medium or large for the Rycote Super-Shield Kit for Shotgun Mics. Which one would fit better?

A: RYSSKM is directly compatible with the Rode NTG3B.

Q: 4. Will the Rode NTG4+ fit inside this blimp (size medium)?

A: Yes it will. Just ensure that you position it properly on the mounts.

Q: 5. Would this be the correct model for the Sennheiser MKH 50?

A: The Super-Shield Kit for Shotgun Mics (Small) from Rycote will accommodate several mics including the MKH-50. Rycote also recommends the Modular Windshield WS 2 Kit for a more robust solution.

Q: 6. Would the Audio-Technica bp4025 head fit when mounted with the 5 pin XLR cable?

A: The Rycote Super-Shield Kit for Shotgun Mics would not be recommended for use with microphones as wide as the Audio-Technica BP4025.

Q: 7. Could this be use on-camera on a shotgun mic in heavy wind situation ?

A: Yes; If you have the microphone mounted to a sturdy shockmount.

Q: 8. Will it fit Synco D1 ?

A: The Synco Mic-D1 Hypercardioid Shotgun Microphone is too long for use within the Rycote Super-Shield Kit for Shotgun Mics (Medium). The Rycote Super-Shield Kit for Shotgun Mics (Large) (BH #RYSSKL) is the proper choice for use with the Synco Mic-D1: https://bhpho.to/3U26PkT

Q: 9. Can this screw onto a boom pole? If so, what are the thread specs?

A: Yes, the Blimp can be attached to a boompole, threading size is 3/8"

Q: 10. I would like to remove the handle from this and mount it to a camera cage with a 3/8-16 or 1/4-20 screw. Would that be feasible by threading it through the hole the handle clamp screws through?

A: No problem grippper will attach to your rig as long as you have a 3/8 thread