Ideal for portraits, products, or fill light, the FotodioX Pro FACTOR V-5000ASVL Bi-Color LED Lightfrom FotodioX measures 2 x 2' and has a host of essential professional and convenient features that make using the light an easy and intuitive experience. Unlike other soft lights, the Pro FACTOR 2 x 2' has a built-in diffuser. The LEDs are set deep within the fixture instead of up against the diffuser, thus defeating harshness and hot spots to make the output as soft as it can be.

The Pro FACTOR 2 x 2' has color that's variable from 3200 to 5600K to accommodate any other light source, ambient light conditions, or to maximize your creative options. It dims from 10-100% and both color and light intensity can be controlled locally on the unit or remotely via DMX. The light draws just 300W while outputting many times that number in tungsten equivalence to render accurate, natural color with a CRI rating of approximately 96.

Thanks to the inclusion of a 110-240 VAC power supply, the Pro Factor 2 x 2' is ready for worldwide use, but it also has a V-mount battery plate for optional batteries that can run the fixture for 0.86 hours when mains power is unavailable. The Pro FACTOR 2 x 2' ships with a yoke, a 5/8" receiver, and removable clip-on barndoors.

Variable Color: 3200 to 5600K    10 to 100% Dimming    DMX Control of Color and Dimming    High CRI of 96 for Accurate Color    110-240 VAC, 50/60 Hz    V-Mount Battery Plate/Optional Batteries    Low Heat, Low Power Draw of 300W    Rear Backlit LCD, Removable Barndoors    Built-In Diffuser, Extra-Soft Output    Optional 90° Grid, Creative Masks

• Powerful softlight without the need for diffusion and without the traditional shortcomings (multiple shadows, uncomfortable intensity) of conventional LED panels
• The Pro FACTOR light is ready to go for both photo and video right out of the box - no extra diffusion or accessories to add. Included barndoors control and shape the light, and are easy to remove
• AC adapter locks into V-mount battery mount, or you can attach an optional V-mount battery for totally wireless operation
• The light draws a maximum of 300W, so it can connect to any household electrical circuit
• Durable all-metal construction, ready for studio and location work
• Rear backlit LCD displays percentage of light output, color temperature, remaining battery level, and DMX channel information
• Optional Honeycomb Grid to concentrate light's beam angle to 90 degrees

Related Questions and Answers

Q: 1. Why there is no reviews on any of this series, since it's been out for long time now?

A: Nice light! Big. Heavy. Sturdy.

Q: 2. Hi does the unit come with a soft box and a honey come ?

A: Unfortunately, neither a softbox nor a honeycomb grid are included.

Q: 3. how much does the fixture weigh?

A: The FotodioX Pro FACTOR V-2000ASVL weighs 12.9 lbs.

Q: 4. Amp of this light?

A: This is a 150w light. On 110v that is about 1.5amp on 230v its about 0.8amp.

Q: 5. Regarding the output of the light, how bright is it at its highest setting? For example, it is comparable to a 500w light, 650w, 1000w, etc. in terms of how bright it can get

A: As per the manufacturer, this light produces a lumens output of 1850, which is roughly 100-150 watts equivalent in a tungsten lamp head.

Q: 6. Would a couple of these lights work in a small video studio? They would be hanging from a small truss mounted between two walls. Thanks.

A: These are 200w LED so they are rather powerful. It would largely be dependent on the types of shoots and the outcome expected. Its possible they would work.

Q: 7. How bright is the light?

A: The photometric output of the FotodioX Pro LED-312DS Bi-Color LED Photo Video Light Kit is 665 lux at the 3200K setting and 765 lux at the 5600K setting.

Q: 8. Which stand to buy for holding this beast?

A: Avenger makes a stand suitable to the load. https://bhpho.to/36Fbfp5

Q: 9. in specs is written that weight is 10.12 kg, but without v mount yes?

A: The spec is with out the battery.

Q: 10. I recently received 2 lighting kits. Is it use the supplied charger/ac adapter to power the light with ac while the batteries are still attached to the light? Thanks.

A: The AC adapter would be plugged in directly to the panel for power through an AC outlet, but it cannot charge the batteries at the same time.