Featuring four independent charge bays, the Core SWX Fleet Micro 3A Gold Mount Battery Chargeris capable of simultaneously charging four batteries at 3A each. This means that four 98Wh batteries can be charged in under 2.5 hours. The on-board LCD display screen allows you to easily monitor your battery's smart battery data without needing to connect to a computer. The micro-USB connector allows for firmware updates and for connection to a computer.

The built-in Battery Management Test mode allows the charger to determine battery health and recharge performance. Activating the SafeFly mode forces the charger to discharge or charge connected batteries to a 30% charge level to meet air travel and shipping requirements. While plugged into an AC power source the Fleet Micro 3A Quad Charger can either charge batteries or be used as a camera power supply via the built-in 4-pin XLR. In the absence of AC power, you can use the charger to feed the 4-pin XLR from connected batteries providing unregulated power. The housing is made of aluminum, providing for a robust build.

Four Position Gold Mount Charger    Charge Current: 3A    Simultaneously Charge Four Batteries    4 x 98Wh Packs Charge in Under 2.5 Hours    On-Board LCD Display Screen    Battery Management Test Mode    SafeFly Charge/Discharge Mode    Worldwide Compatible 90-240 VAC Input    4-Pin XLR Powered DC Output

• Four independent Gold mount charge bays
• Simultaneous charging
• Approximately 2.5-hour charge time for four 98Wh batteries
• 90-240 VAC worldwide compatible input voltage
• Compatible with batteries from RED, Anton Bauer, and others in addition to CoreSWX
• The four-line LCD display screen enables monitoring battery information from the charger
• Hypercine mode allows you to mount up to four batteries to provide unregulated 12 to 16.8 VDC from the charger's 4-pin XLR, without connecting to an AC power supply
• In Hypercine mode the charger's LCD reports back available capacity as well as remaining runtime
• Aluminum build
• Weighs 5 pounds

Related Questions and Answers

Q: 1. Can this charger be used on Anton Bauer Dionic series gold mount batteries?

A: Not that we are aware of. Anton Bauer Dionic batteries will require Anton Bauer chargers.

Q: 2. What does Volt Bridge Enabled do if one was to choose this option?

A: The VoltBridge version of the Core SWX Fleet Micro 3A Digital Quad Charger for Gold Mount Batteries allows for wireless battery management through a mobile device app, providing remote battery status as well as the ability to put mounted batteries into SafeFly mode.

Q: 3. Are there any software or battery monitoring options when connecting to a computer via the micro-USB?

A: The on-board LCD display screen allows you to easily monitor your battery's smart battery data without needing to connect to a computer.

Q: 4. Can the Fleet-D2A charge all of Anton Bauer batteries or is limited t only lithium-ion Core SWX brands?

A: This should be able to charge any Gold Mount Battery by any brand.

Q: 5. Would you recommend this battery for use on the the Aperture LightStorm LS 1c?

A: You could use this battery on the Aputure Light Storm LS 1C V-Mount Version, B&H #APLS1CV. This is a high capacity battery at 150Wh, so it would be a very good choice for the light.

Q: 6. 2 questions: 1) is the 3A charge current for each channel? 2) does this prioritize charge or 3A per channel constant?

A: The Core SWX Fleet D Gold Mount 2-Bay Charger (B&H# COFLEETD2A) supplies each battery a regulated 3A of charge current regardless of the number of batteries present. If two 98Wh batteries are installed, for example, then you can therefore expect a charge time of approximately 2.5 hours, although that does vary according to temperature and variances in battery chemistry.

Q: 7. Is this charger compatible with these batteries? Anton Bauer Logic Series Dionic 160 Digital Interactive Lithium-Ion Battery, 14.4 volts, 160 watt hours, Anton Bauer 3-Stud Gold Mount

A: Yes, it will charge all Dionic model, as well as Hytrons (NiMH) and the new AntonBauer offerings (Digital and Cine series).

Q: 8. Will this work with the Endura cue V-mount d-150? 146Wh

A: no this will not charge IDX batteries

Q: 9. Can you charge this with the USB port?

A: No, the USB is just an ouput.

Q: 10. s it safe to charge IDX CUE-D150 v-lock batteries on this?

A: The truth is all gold mount and v-mount chargers can charge all gold mount and v-mount batteries. But note this other truth: manufacturers do not support this action. What this means if a problem or damage occurs, then they will not do warranty repair on either the charger or battery. You are on your own.