With the GyroVu Universal DJI Ronin to Vest Arm Post Adapter, you can provide additional stabilization to your Ronin platform by securing it to a stabilizer vest. This adapter clamps to the gimbal's handle and slides onto the vest's mounting post.

Works with a Variety of Stabilizer Vests

This version of the adapter is compatible with stabilization systems featuring 7/8", 3/4", 5/8", 1/2", 19mm, 16mm, 15mm, or 12mm diameter arm posts. Notable systems with these posts include:

• Steadicam G40, G50, G60, G70, Scout, Zephyr
• Glidecam X-10, X-20, X-30, X-45, Gold
• GPI Pro Atlas, Titan
• ActionCam

Related Questions and Answers

Q: 1. Will this work with the Glidecam x-22?

A: Hello there...The best thing to do would be to phone Cinemilled Customer service and ask them if one of their adaptors would fit the X-22 system; it all comes down to whether or not the X-22 armpost fits the Cinemilled adaptor. I have done a fair bit of research on this for my Glidecam X-10 system and subsequently bought the Cinemilled 7/8 armpost adaptor. The 7/8 adaptor is the recommended (by Cinemilled) hardware for the X-10/DJI Ronin combo. If the armpost for Glidecam arms are all the same then you're good to go with the 7/8 however; since the X-22 supports a heavier payload (10-25lbs) than the X-10 (13lbs), it may very well use a larger post and a different size adaptor. Hey, if the forums have nothing so far the manufacturer would know for sure; all I can say is that once you find the right adaptor, it's a very impressive rig...hope this is helpful!

Q: 2. Do you have an estimate on when these units from Cinemilled might be arriving? I'm from Canada, so the pre-ordering process doesn't work as well for me based on shipping prices. Thanks in advance!

A: Sorry, but we do not have a date of arrival for these units. Hopefully soon.

Q: 3. The glidecam x-10 has a 21.5mm pin. The description includes the X-10 but the nearest listed sizes are 7/8" and 3/4" (22.22mm and 19mm respectively). Can you confirm if this adapter comes with a shim for a 21.5mm pin or is the 7/8" close enough to work without slop/wobble?

A: No, the GyroVu Universal DJI Ronin-M/MX to Vest Arm Post Adapter does not come with a shim. We have the Glidecam X-10 Dual Support Arm Stabilizer Vest System listed as using a 5/8" Junior pin for mounting.

Q: 4. Hi i have an SK steadicam vest and i want to use it with the cinemilled armpost adapter and i want to know wich hole size i have to choose..!?

A: Unfortunately, neither we or CineMilled have heard of the SK Steadicam vest . We therefore ask you contact the manufacturer and then CineMilled with that information so that the proper adapter can be selected.

Q: 5. Would this fit on a Glidecam 4000 Pro post?

A: If you are using the Glidecam 4000 Pro on the Glidecam X-10 System, yes this will work. This is designed to work with the Glidecam X-10, X-20, X-30, X-45 and Gold.

Q: 6. Does this work with the Zhiyun 3s and Glidecam X-10?

A: It looks like this Stabilizer has 1/4"-20 mount on the bottom, so it should work just fine with Glidecam or any other rig. Sincerely, GyroVu Team

Q: 7. Will this work with the Glide Gear DNA 6000 arm and vest?

A: This combination is unknown but it should work with any 7/8 post. The Glide Gear DNA 6000 is reported to be 7/8 so you should be good.

Q: 8. The CineMilled steadicam arm post adapter: Will this adapter work with Movi Pro - for Steadycam arm post?

A: Yes, this will work with the Movi Pro. The Movi Pro has a 30mm bar, which is the proper size for this adapter.

Q: 9. Lost my Ronin top bar + handle, can this replace it ?

A: That may be possible, however this product is designed specifically to allow you to mount a Ronin on to an Arm and Vest System such as those that are used with Steadicam products. The DJI Grip for Ronin, B&H # DJRP52G, would be a more appropriate replacement option.https://bhpho.to/2xCiGyd

Q: 10. Will this accept a Sachtler or manfrotto tripod baseplate? The adaptor that comes with the Ronin 2 does not and this looks like the same thing.

A: No, This only works with the older DJI Ronin 2 plate and it was not Manfrotto compatible.