The black Countryman B6 Lavalier for Olympus Recorders, L/R Audio, Blackis a miniature lavalier microphone measuring only 0.1" in diameter. It features a 3.5mm locking connector and connects to select Olympus recorders with audio on the left and right channels. The B6 microphone provides high-quality audio with low distortion at SPL up to 120 dB on 48V phantom power. The aramid cable combined with the ultra-thin diaphragm ensure low handling noise. And the tiny size combined with natural sound pickup make the microphone easy to position, for ambient noise and feedback rejection.

The included changeable protective caps (+0, +4, and +8 dB) provide moisture resistance, allowing you to adjust the frequency response to suit different applications or to match other microphones. Each of the three omni caps has a different high-frequency response characteristic that controls the amount of crispness or sibilance (response at 15 kHz). This microphone ships with the attached +4 dB protective cap that boosts the perceived amount of presence in your sound, while leaving the lower frequencies unchanged. You can switch to the 0 dB cap in case of problems with high-frequency feedback.

With low-handling noise and a rugged construction, the B6 microphone is a suitable choice for theater, broadcast, places of worship, and general lavalier applications.

Olympus DS-40, DS-51, DS-61, DS-71, DS-2400, DM-420, DM-520, DM-620, LS-10, and LS-14 recorders with audio on left and right channels

Can be easily hidden in the hair, on costumes, or can be taped to a performer's face

W4 (gray band) standard sensitivity is suitable for general speaking, such as presentations or public addresses, where the microphone is positioned on the chest or lapel

Provides high-quality audio with low distortion at SPL up to 120 dB on 48V phantom power

Comes with three changeable protective caps (+0, +4, and +8 dB)

Resistant to makeup, sweat, and moisture when used with the supplied protective caps

Protective caps can be easily removed for cleaning or replacement when clogged with makeup

Related Questions and Answers

Q: 1. Can this survive harsh water sports like whitewater kayaking?

A: Yes, the B3 was designed to be water-resistant and it can be used for water sports as well as for reporting during a hurricane, it should survive water water kayaking.

Q: 2. What are the interior dimensions?

A: The manufacturer has only provided external dimensions for the PortaBrace AR-DR701D Carrying Case. The case is designed specifically for use with the Tascam DR701D and DR70D Audio Recorders. You can use the dimensions of the two recorders for reference if you are trying to determine whether a different device will fit. Dimensions of the DR-70D are 6.7 x 2.2 x 4.2" (169 x 55.2 x 106.5 mm) and dimensions of the DR-701D are 169 x 2.25 x 4.5" (169 x 57.3 x 113.5 mm).

Q: 3. Is it fully compatible with Tascam DR-40 ?

A: Yes, this is compatible with a Tascam DR-40. Please make sure to turn on the 48v phantom power in order to run the microphone.

Q: 4. Any issues with using the Countryman B3 with the Zoom H1n?

A: This version of the Countryman B3 has a locking 3.5mm connector which is compatible for Sennheiser wireless transmitters and will not properly connect to the input on the Zoom H1n. B&H # COB3W4BZP / MFR # B3W4FF05BZP is the same Countryman B3 Omnidirectional Lavalier Mic with standard sensitivity and a non-locking 3.5mm connector in black. It is listed as compatible for Azden wireless transmitters and will also work with the Zoom H1n. The mic does draw a lot of power so it will drain the H1n's battery quicker than other lavalier mics. As another option, you may want to consider the Countryman EMW Omnidirectional Lavalier Microphone in black, which is B&H # COMEMWSFF05B / MFR # MEMWSFF05BD3. The EMW requires less power and is designed for use with digital recorders.

Q: 5. Will this clip also fit an Isomax 2 mic?

A: Unfortunately they do not make a vampire clip for the Isomax 2 only the B series of mic's.

Q: 6. To be used hidden on clothes for film, do i need Standard or low sensitivity?

A: Mic sensitivity is related to how much gain you have to give the mic. A low sensitive mic would need more gain sent to it to get a good audio level, and is used for live stage use, or in a loud environments. The real issue you have to deal with when hiding a mic on clothes is keeping the head of the mic away from fabric rubbing on it. I would suggest a standard gain mic, and then utilize mic mounting solutions, such as the Bubblebee Industries Invisible Lavalier Microphone Covers, BH #BUBBIILC30. or the Remote Audio Foamies Foam Mounts for Lavalier Microphones (Set of 12, White), BH #REUFOAMIEWH. These products will protect the mic, and when properly placed on the talent, can provide the best sound, minus the clothing rubbing.

Q: 7. Does this mount have a tilt feature? Can I point the mic up or down?

A: The Alzo shock multi-mount does allow users to tilt up and down.

Q: 8. will the lavs work with a camcorder?

A: This item is a clip for a B6 Countryman lav mic, which is made to connect to wireless mic systems.

Q: 9. Can I order additional bands to have on hand in case one brakes?

A: Yes, ALZO digital sells sets of 4: https://bit.ly/2NklPst

Q: 10. Does it fit a Zoom f8 recorder?

A: Zoom F8 Dimensions 7 x 5.5 x 2.1" / 178.2 x 140.3 x 54.3 mm Sound Devices MixPre-10 II Dimensions 8.1 x 1.4 x 6.9" / 206 x 36 x 175 mm