Laird Hd-Bnc Male To Bnc Female Hd-Sdi Cable 50Ft

Laird Hd-bnc Male To Bnc Female Hd-sdi Cable 50ft

Product Code: eq41819
Availability: In Stock

$182.85 $285.25

Qty

3 reviews Write a review

Description
Reviews (3)

Connect video broadcast routers and similar equipment with the 50' Laird HD-BNC Male to BNC Female HD-SDI Cable 50ftfrom Laird Digital Cinema. This SMPTE 292M- and 424M-compliant cable features Belden 1855A RG59/23 coaxial cable, one HD-BNC (Micro-BNC) connector and one standard BNC connector. The Micro-BNC connector is 51% smaller than a standard BNC connector but features the same secure push-and-turn lock design.

1 x HD-BNC/Micro-BNC Male Connector 1 x Standard BNC Female Connector 75-Ohm BNC Connectors SMPTE 292M & 424M Compliant

Parameters
Connector 1	1x BNC
Connector 2	1x Micro-BNC
Cable Length	50' / 15.2 m
Interface	HD-SDI
SMPTE Standards	SMPTE 292M/424M-B
Packaging Info
Package Weight	0.92 lb
Box Dimensions (LxWxH)	14.35 x 11.35 x 2.45"

The HD-BNC connector features a lack of variable return loss and mechanical bonding commonly found with mini-BNC and DIN 1.0/2.3 connectors. This connector meets or exceeds SMPTE 292M and SMPTE 424M specifications for return loss.

Related Questions and Answers

Q: 1. Will this cable carry 6G (4k 30fps) ?

A: No based on the specifications this is a 3G-SDi rated cable

Q: 2. Is this compatible with the TH-42PF20U?

A: Yes, the Panasonic TY-FB9HD HD-SDI Terminal Board (BNC) is compatible with the Panasonic Full-HD Professional Plasma Display (42 ) B&H # PATH42PF20U MFR # TH-42PF20U.

Q: 3. Can this be used to transmit timecode from the Denecke JB-1 to the Canon C300 Mark III?

A: Yes, the ARRI 12G HD-SDI BNC Cable (25") can be used for transmitting timecode from the Denecke JB-1 to the Canon C300 Mark III.

Q: 4. Will work with komodo and raptor?

A: Yes, The ZILR 12G-SDI BNC Cable will support up to 4k 60p with cameras that have SDI output ports. Both the RED Raptor and Komodo have 12G SDI ports.

Q: 5. Is this a 3g cable?

A: This cable will function at short distances for 12G. Any cable will be backwards compatible for bandwidth. I.e a 12G cable will function at 6G or 3G or standard SDI.

Q: 6. Is there a distance limitation with this cable and 3G SDI?

A: 3G SDI can be sent up to 330 feet, so the Laird Digital Cinema 23 AWG Thin-Profile 3G/HD-SDI 16-Channel BNC Snake Cable (150') should not have any issue carrying a 3G SDI signal over the length of it's 150 foot run.

Q: 7. is this cable plenum rated ?

A: No. this is a 4794R assembly which is not plenum-rated.

Q: 8. Hi, can this handle high speed data as well?

A: I believe the answer is yes,But what is your application for its use?

Q: 9. Is this the correct SDI cable to connect the Shogun Inferno to a C300 Mark II for the purpose of recording 4k Raw?

A: Yes, this cable should work well with the Shogun Inferno and C300 Mark II.

Q: 10. how do I attach this cable?

A: The Canare L2.5CHD Ultra Slim HD-SDI BNC Cable (5 ft), features standard male BNC connectors which would thread onto a standard female BNC terminal by twisting the the cable's BNC connectors to lock with the female BNC terminal.

Paul	28/07/2024
[0.92 lb] This cable was recommended as it's slim but still shielded. It's been very sturdy for connecting my FX6 to my Atomos Shinobi Monitor. No complaints so far. 5

Cristian	30/11/-0001
[0.92 lb] Solid way to send up to 10 SDI signals in one strand. Well built, no problems so far. 5

David	30/11/-0001
[1x Micro-BNC] This cable is nice. Much nicer end than some SDI Cables I've worked with. It's pretty easy to get it to spin on and off on the back of a video panel/mixer, which can be a pain sometimes with harder to work with cables. Just be aware, a 1 foot patch cable is VERY short! It barely reaches between one piece of rack equipment and the one right below it. Like, if you had to go from one side to the other and one rack unit down, it might not reach. Go with 1.5 or 2 ft for all but the closest patches...! Especially if the units are not the same depth. 5