The JELCO NSATA-R ATA Projector Shipping Case R (Grey and Chrome) is a non stock custom made ATA projector case. It is constructed of high-impact ABS plastic over a 1/4" wood frame with a custom-cut 1.5-2.0" industrial-grade foam interior. This rugged shipping case has steel corners, aluminum trim, inter-locking valence, and stainless steel rivets that team up to produce an ultra-strong case that will give years of service.

The NSATA-R case has a large accessory compartment that holds cords, cables, and a remote control, as well as other necessary items. It is transported by a recessed spring-action handle, a lock-in and lock-out extension handle and built-in tilt wheels. Neoprene bumpers on either side of the handle give important additional protection.

This case is designed to fit various projectors from BenQ, Boxlight, Dukane, Eiki, InFocus, Mitsubishi, NEC, Optoma, Proxima, Sanyo, Sharp, Sony or ViewSonic projectors.

Fits Many Multimedia Projectors    ABS Plastic Laminated over Plywood    Fully Lined with 1.5 -2.0" of Foam    Recessed Butterfly Latches with Lock    Recessed Spring-action Handle    Lock-in and Lock-out Extension Handle    Built-in Tilt Wheels

• High impact ABS plastic over 1/4" wood frame
• Custom-cut industrial-grade foam
• Steel corners
• Aluminum trim
• Inter-locking valence
• Stainless steel rivets
• Neoprene bumpers for extra protection

ATA-300 style shipping case for multimedia projector and accessories designed for checked luggage or sending via FedEx/UPS

Storage area inside holds cords, cables, remote, etc

Recessed butterfly latches with a combination lock

• Recessed spring-action handle
• Lock-in and lock-out extension handle
• Built-in tilt wheels

Sealed wheel housing to exclude water

This is a non-stock case which can be built-to-order with a standard lead-time of shipping 2-4 weeks from the date we receive the order. Please specify exact projector model

Click Here for Compatibility Chart 

Related Questions and Answers

Q: 1. II lost my spare key for this case, how do I buy spare keys?

A: You would have to contact SKB in regards to a lost key.

Q: 2. will the Acer Predator Helios 500 laptop fit in this case?

A: The Acer Predator Helios 500 laptop will not fit into this Laptop hardshell case. Unfortunately the Acer is a 17.3 sized laptop and this cases cut off is 17inches. It's better to have some extra room and to fill the space with padding for optimal security.

Q: 3. Will this case also work for the OConnor 2575D?

A: Based on the dimensions of this case, it should. The 120EX is slightly larger than the OConnor 2575D.

Q: 4. Is this case strong enough to do frequent check in at the airport?

A: yes as long as you don't make it too heavy. keep it to 50lbs or less and should be fine

Q: 5. Has anyone traveled a lot with these? How well do these fare in frequent air travel?

A: Although we have not put it to the test directly, the SKB 1SKB-H4812W Regular ATA Stand Case is ATA-certified for specification 300, Category 1, which is the highest standard for airline transport containers, and has the potential to stand up well to the rigors of frequent air travel.

Q: 6. Will it fit a tascam dm 24?

A: No, this case is too small. Tascam lists dimensions for the DM-24 as 22.9 x 25.9 x 7.8" (582 x 657 x 198mm). We unfortunately do not have a molded case available at this time that will properly fit.

Q: 7. Will it fit Midas M32R mixer which is slightly higher? 24x19x8.4

A: Unfortunately it will not, however at NAMM 2017 we just released a brand new large format mixer bag, the G-MIXERBAG-2621, which will provide a perfect fit for the M32R. It will be available in Spring 2017. Further information here: a href= http://www.gatorcases.com/p/210122-2600/g-mixerbag-2621 target= _blank http://www.gatorcases.com/p/210122-2600/g-mixerbag-2621./a

Q: 8. How many of these (a href= http://www.bhphotovideo.com/c/product/112099-REG/Matthews_756140_Century_C_Turtle_Base.html target= _blank http://www.bhphotovideo.com/c/product/112099-REG/Matthews_756140_Century_C_Turtle_Base.html/a) disassembled could this case hold? Thanks!

A: that light stand you referenced has a 40 main section. Sometimes the actual overall length is more than the nominal length for the main section. The listing for the case gives the interior dimensions and a ID length of 36.5 .

Q: 9. Will it fit the Behringer X32 COMPACT 25x20.8x8.46?

A: If the mixer you have is the Behringer X32 Compact 40-Input, 25-Bus Digital Mixing Console with 16 Microphone Preamps (B&H # BEX32COMPACT • MFR # X-32 COMPACT), the Gator Cases G-Mix 20x25 (B&H # GAGMIX20X25) is not wide enough to accommodate the mixer's height. For a case with wheels, Gator Cases G-TOUR X32CMPCTW ATA Wood Flight Case for Behringer X-32 Compact Mixer (B&H # GAGTOURX32CM) is a good option. The Gator Cases G-Tour Series ATA Wood Flight Case for Behringer X32 Compact Mixer (B&H # GATRX32MPCTN) is a similar case without wheels. For other options, the ProX Hard Road Case for Behringer X32 Compact Mixer with Doghouse and Wheels (B&H # PRXSBX32CDHW) or Odyssey Innovative Designs FZBEHX32COM Flight Zone Series Live Sound Mixer Case for Behringer X32 Compact (B&H # ODFZBEHX32CO). Please contact us directly for further assistance.

Q: 10. On the specs it says has three metal latches for closure. I only see two in the pictures. Can you confirm ?

A: The SKB Trap ATA Stand Case with Wheels comes with only two latches. We apologize for the discrepancy.