Capture sharp, detailed photos and video beneath the surface with your Canon EOS 7D Mark II DSLR camera in Ikelite's 200DL Underwater Housing with Dry Lock Port Mount. Both the front and back are depth rated to 200'. An Ikelite ICS-5 bulkhead with a manual hot shoe connection enables reliable electrical triggering of optional, external strobes. Use of an optional TTL hot shoe and circuitry will allow for TTL operation with compatible Ikelite DS strobes; non-Ikelite strobes will still work in manual mode only.

Ergonomic mechanical controls, including push-buttons, knurled knobs/dials, and levers, afford access to virtually all camera functions. Built for durability, the enclosure is made in the USA from a corrosion-resistant polycarbonate and ABS plastic blend. It's white on the front, top, sides, and bottom, but the clear acrylic back plate allows you to monitor the O-ring seal and maintain your view of the camera's rear controls. The supplied aluminum tray with a left-hand quick-release grip affords improved balance and handling, while offering an attachment point for an optional lighting arm.

The housing ships without a required lens port, and accepts various dome and flat ports for a broad array of zoom, macro, and wide-angle lenses. For full compatibility, see the Port Chart. The Dry Lock (DL) Port System accommodates lenses with large diameters, and provides added security against leaks at the surface, thanks in large part to the included vacuum valve for checking watertight integrity before the dive. The DL port mount may be removed and replaced by an older one to allow you to use standard and modular ports from Ikelite's Four Lock system.

Depth Rating: 200'    Ikelite Bulkhead Strobe Connector    Manual Flash Exposure, TTL Optional    Mechanical Controls    Access to Virtually All Camera Functions    White ABS/Polycarbonate Body, Clear Back    Interchangeable DL Lens Port System    Ships Without Required Lens Port    Tray & QR Handle, Vacuum Valve    Made in the USA

• Front and back parts are both depth rated to 200'
• Made by hand in USA from corrosion-resistant polycarbonate and ABS plastic blend
• White on front, top, sides, and bottom to reflect sunlight and keep camera cool when shooting on or above water's surface
• Clear acrylic back plate lets you monitor O-ring seal and maintain view of camera's rear controls
• Open-groove design suspends O-ring in natural position, so it's easier to maintain and you don't have to force it into a channel
• Housing alone has nearly neutral buoyancy in fresh water; overall buoyancy when shooting depends on choice of lens and port
• Camera mounting plate enables quick installation and does not need to be removed in order for you to gain battery or memory card access
• Mounting plate has 1/4"-20 threaded hole on bottom for connection to tripod

• Use of external strobe highly recommended for color correction and adequate brightness, and will be extremely helpful--if not essential--once you descend further than 15-20' underwater
• Strobe restores hues that get absorbed by water, so your images are vibrant and accurate
• Try to stay no more than 3-4' away from subject to preserve natural colors in images
• Ikelite ICS-5 bulkhead with a manual hot shoe connection enables reliable electrical triggering of optional, external strobes via sync cords
• Optional # 46070 CT1K Canon TTL Kit (hot shoe and circuitry) will allow for TTL operation with compatible Ikelite DS strobes; non-Ikelite strobes, such as Sea & Sea, Inon, and Nikonos models, will still work in manual mode only
• All strobes used with camera in this housing require sync cord connection, unless they are additional flash units being triggered as slaves by the hard-wired strobes
• Exposure compensation can be adjusted using in-camera controls
• Available sync cords: #4118.1 Single INON / Sea & Sea type, #4118.2 Dual INON / Sea & Sea type, #4116.31 Single Nikonos SB type, and #4116.32 Dual Nikonos SB type
• Older, non-digital strobes with ICS-5 bulkhead can be used in manual mode with #4103.51 Single or #4103.52 Dual cord
• Ikelite DS strobes support remote triggering via Optical Slave Converter #4403 or Aquatica's Water Wizard system
• Flash bulkhead moved to top of housing to keep cords out of the way and reduce strain on them
• Reliable locking connectors between hot shoe and bulkhead make installation of optional TTL electronics easy, while also allowing you to carry backup parts when traveling

• Ergonomic mechanical controls, including push-buttons, knurled knobs/dials, and levers, afford access to virtually all camera functions
• Accessible controls include shutter release, start/stop video recording, menu, info, magnify, playback, set, main dial,

  mode dial, drive mode, AF-ON, zoom, and delete

• Extra-large, soft touch zoom/focus knob makes fine adjustments easy
• Shutter and AF-ON levers feature a curved design,

  and can be elongated with optional #4077.93 Shutter Trigger Extension for increased comfort when using optional right-hand QR grip

• Push-buttons have been designed to reduce weight and salt buildup
• Rear of housing has laser-engraved control symbols that won't fade over time
• Supplied, lightweight, hard-anodized aluminum tray with a left-hand quick-release grip affords improved balance and handling, while offering an attachment point for an optional lighting arm
• Tray and handle can be removed with ease for travel and storage
• 1/4"-20 threaded mounting point located front and center, above lens port mount, allowing for attachment of lightweight accessories like focus lights and GoPro action cams
• If shooting with 2 strobes, you can add optional top handle to make carrying easier
• Included Supereye Viewfinder provides enhanced view of camera's OVF when seen through dive mask
• Improve your view to an even greater extent with optional #6890 Straight Magnified Viewfinder or #6891.2 45° Magnified Viewfinder Type 2

• Dry Lock (DL) Port System
• Housing ships without a required lens port, and accepts various interchangeable dome and flat ports for a broad array of zoom, macro, and wide-angle lenses
• Zoom and focus gears also available
• Accommodates lenses with large diameters, such as Canon's EF 16-35mm Type II/III and 11-24mm
• For full compatibility, see Port Chart linked above
• Provides added security against leaks at the surface--thanks in large part to included vacuum valve for checking watertight integrity before dive
• #47011 Vacuum Pump with Gauge required in order to remove excess air and actually create a vacuum
• DL port mount may be removed and replaced by older one to allow you to use standard and modular ports from Ikelite's Four Lock system
• To have DL port mount re-installed, you will have to send housing back to Ikelite or an authorized dealer for service

Related Questions and Answers

Q: 1. Does this housing fit a 15-35mm RF lens?

A: The Ikelite 200DL Underwater Housing for Canon EOS R Mirrorless Camera does not include a lens port. You need to buy items to match the lens you will be using. To use the Canon RF 15-35mm f/2.8L IS USM Lens you need the following: 1. Ikelite DL 8" Dome Port BH #IK75340 • MFR #75340: https://bhpho.to/2UrAQ1c 2. Both the Ikelite DL 28mm Port Extension BH #IK75028 • MFR #75028 and the Ikelite DL 50mm Port Extension BH #IK75050 • MFR #75050 has to go between the housing and the port: https://bhpho.to/3774b3u https://bhpho.to/2tAmCzY 3. Ikelite Zoom/Focus Clamp and Gear Sleeve Set BH #IK55093 • MFR #5509.30 needs to go on the lens so you could control the zoom: https://bhpho.to/3888Pj9 Housings with a serial number of 72644 and lower require to be modified by Ikelite to use this lens.

Q: 2. I have a Canon Rebel T1i w/Ikelite housing. Are the lens ports compatible with this new housing? I have an 8 dome port w/port body and a flat port for my 60mm macro.

A: The older FL ports will not be compatible with the DL port Base. The Base can be removed and replaced with four locks to use your existing ports. Shoot an email to ikelite@ikelite.com for more details on options.

Q: 3. So the Ikelite DL 8" Dome Port is not included as well?

A: Yes, Ikelite 200DL Underwater Housing for Canon EOS R5 Camera BH #IK200DUHER5M doesn't include the Ikelite DL 8" Dome Port.

Q: 4. Is the port system compatible with my old ports from Rebel t1i's Ikelite housing? I have an 8 dome w/port body, also have a flat port for my 60mm macro lens.

A: This housing ships with the Dry Lock (DL) port base, which will not be compatible with older Four Lock (FL) ports.

Q: 5. Will this housing fit EF lenses with an adapter or only RF? For example I have the EF 16-35mm f/2.8 iii but not sure if this housing would be compatible.

A: Yes the Canon 16-35 f2.8 Mark 3 EF lens is compatible with the Ikelite 200DL Underwater Housing for Canon EOS R Mirrorless Camera when using the Canon EF to RF adapter.

Q: 6. Would this be an appropriate waterproof case for the canon rebel t6i; would it fit? If not, what would be a better option?

A: The Ikelite 200DL Underwater Housing for Canon EOS Rebel T7i with Dry Lock Port Mount (200') is not compatible with the T6i. We could get for you the Nimar Underwater Housing for Canon EOS Rebel T6i. Keep in mind none of these housings include a lens port. You have to purchase a port to match the lens you are using. For help with ports or any other underwater questions email us at uw@bhphoto.com.

Q: 7. where is the shutter release?

A: The shutter release is on the right side of the Ikelite 200DL Underwater Housing for Canon EOS R Mirrorless Camera.

Q: 8. Hello! Was wondering if I buy this for my M50, would my Canon EF-M 32 mm lens work for this housing?

A: Yes, the Ikelite 200DLM/A Underwater Housing for Canon EOS M50 & M50 Mark II works with the M50 with the Canon EF-M 32mm lens attached. But you will need the Ikelite DLM 6" Dome Port with Zoom Control for Wide-Angle Mirrorless Lenses, https://bhpho.to/3pkMD2B .

Q: 9. Which double strobe tray do you recommend for this housing?

A: The Ikelite Tray with Dual Release Handles for Compact Underwater Housings, BH #IK9523.64, is the correct double strobe tray for the Ikelite 200DLM/D Underwater Housing for Canon EOS R10 Camera.

Q: 10. Which lens should I use with this housing?

A: The Ikelite 200DL Underwater Housing for Sony a9 III would require a DL Port Extension to use for varying lenses. Depending on the lens size, there would be a port size that would accommodate the lens. Here are the Ikelite DL Port Extensions: https://bhpho.to/4bDVzTO