Featuring a sliding camera plate, RED DSMC2 WEAPON EPIC-W SCARLET-W RAVEN SHAPE Rig Systemcan accommodate rigs of varying sizes. Simply attach your camera via 1/4"-20 or 3/8"-16 screws to the top plate, and slide it onto the shoulder plate. Fore and aft movement allows you to balance the weight of your setup properly. Further adjustments can be made by moving the shoulder pad. The 15mm rod clamps at the front and rear of the baseplate allow you to secure 15mm accessories such as a matte box, follow focus, lens motors, lens supports, battery plates, or external recorders. Since the front rod clamp is attached to the top plate, the rod-mounted accessories don't need to be repositioned as the rig is adjusted. Additionally, handles can be mounted to the ARRI standard rosettes on either side of the plate. When not shoulder-mounted, the baseplate can be secured to a standard VCT-14 ENG quick release in a matter of seconds, saving time on set.

REVOLT VCT Baseplate with Shoulder Pad    Top Plate with Extendable Handle    RED-Dedicated EVF Mount    Telescopic Handles with Rubber Handgrips    Follow Focus Pro with 28/43 Teeth Gears    2-Stage 4 x 5.6" Matte Box    Front and Rear Rod Clamps    SHAPE Push Button Technology    VCT-14 Compatible    Sliding Camera Plate

The sliding baseplate provides a quick positioning of your camera and accessories for an optimal adjustment of your camera's balance center.

Height-adjustable rod clamp for aligning the 15mm rods at the proper LWS height in relation to the optical axis.

Front and rear rod clamps allow you to extend your rig forwards and backwards.

Built-in storage areas for extra screws and the Allen wrench ensure that necessary adjustment tools are always close at hand.

Safety pins and spring-loaded levers prevent the top plate from sliding unintentionally.

Soft and ergonomic shoulder pad.

Related Questions and Answers

Q: 1. Is there an adapter that will work on blackmagic 4k pl mount to use Ef lens

A: Sorry, no there is not. A PL mount places the lens further away from the sensor than an EF mount will. So even if you got an EF lens onto a PL mount, the EF lens would be focusing on a point of air 8 mm in front of the sensor and the image would be hopelessly out of focus.

Q: 2. Does the adapter come with everything needed to convert Black Magic 4K EF to use PL lenses?

A: No, this adapter is specific to RED Epic or Scarlet Cameras to PL mount, for a PL to Canon EF adapter, instead opt for B&H # FOPCEAAP. Unfortunately we do not have any EF to PL mount adapters.

Q: 3. Would this cable work with the Ronin 4D? Its recommended as an accessory but doesn't say its compatible.

A: Yes, the IndiPRO Tools D-Tap Power Cable for RED Epic/Scarlet (24") has a 6pin connection that would also be compatible with the DJI Ronin 4D.

Q: 4. Will this mount support heavier PL mount lenses like the Sony Cine Alta Primes or RED Pro Primes?

A: This is a very solid PL mount, it will support heavier lenses. However it is never a bad idea to add a lens support unit to your rig, these will give you even great stability and assist you if you are using very large, heavy lenses.

Q: 5. Will this power the Sennheiser MKH-416?

A: It will not, this does not supply phantom power to a microphone.

Q: 6. Will this mount fit on red epic W (DSMC2)?

A: Yep. Im cureently using it in mine. Great mount for those looking to save some coin.

Q: 7. does this work with Komodo?

A: Yes it does. Wooden Camera lists this as compatible with the Komodo as well.

Q: 8. what about the new scarlet w will it work?

A: Yes, all DSMC1 mounts work with the DSMC2 system. This thing is rock solid for the price.

Q: 9. Will this work on the RED Epic Dragon with upgraded fans?

A: I would say of course it feels cheaper. It is. RED's titanium mount is $2000. This costs $400. But, it works fine.

Q: 10. Would this work with a C300 MKII for the 3.5mm mic input? I’d like to expand the XLR inputs from 2 to 4. Thanks

A: This product is not compatible with the C300 Mark II.