Mount your camera to the SHAPE Revolt Sliding Dovetail Riser | Compact Designfor precise tripod balancing and 15mm LWS accessory compatibility. The long plate design can compensate for short or long camera lengths, and it slides to further compensate for interchangeable lenses or other accessories mounted on the camera. The bottom of the baseplate has 1/4"-20 and 3/8"-16 threaded holes for compatibility with most video fluid heads. At the front, a 15mm rod clamp secures the two included rods for accessory mounting. Equipment such as follow focuses, lens supports, drive motors, and matte boxes can be attached to build up your rig. The levers on the baseplate are spring-loaded, so they can be optimally rotated for tightening and loosening bolts. Safety catches on adjustable surfaces have been implemented to prevent the camera from accidentally falling during adjustment.

Sliding Balance Plate    Wide Camera Compatibility    15mm LWS Compatible    Height-Adjustable Rod Clamp    Spring-Loaded Levers    Safety Catches

Disengage the lever at the side of the baseplate to find the center of gravity for precise balancing.

Adjust the height of the rod clamp to ensure that your rod-mounted accessories line up with your camera's optical center.

ARRI Amira and Alexa Mini

Sony FS7, FS7M2, F5, F55, EX1, and EX3

Canon C300, C300M2, and C700

RED Series

Panasonic Cinema Varicam LT 4K S35, AG-AF100, AG-AF101, Varicam LT, and P2

Blackmagic Ursa Mini

Similar cameras with interchangeable lenses

Related Questions and Answers

Q: 1. What is the diameter of the block?

A: The Jobu Design 3.5" riser block has a 2" diameter around.

Q: 2. Does this come with 15mm rods?

A: Hello Kevin, Thank you for your question. Yes indeed! Our BP10 does come with a pair of 8 inch rods and the front and 4 inch rods at the back. We hope this helps and we thank you for your interest in our products. The SHAPE team

Q: 3. is the baseplate a quickrelease one?

A: Yes, You can use VCT QR plates on the bottom of the SHAPE Compact Revolt Shoulder Baseplate. This will allow you to quickly remove the rig when mounted to a tripod. Shape VCT QR plate -https://bhpho.to/3sgLyYw

Q: 4. can this baseplate: BH #8S15BRPB5AD MFR #8-15BP+8-RPB+8-5ADP be mounted on top of this tripod?: BH #SM3751 MFR #3751

A: Yes, the 8Sinn 8-15BP+8-RPB+8-5ADP will attach to any tripod.

Q: 5. Can this be used with the Lumix S5 Cage?

A: Yes, you can use any cage that has a 1/4"-20 and/or 3/8"-16 thread with the 8Sinn 15mm Baseplate + Riser Plate I.

Q: 6. Once I slide the the top plate off the shoulder rig, is there a mating low-profile tripod plate that it can attach to (for a stabilizer or steadicam)?

A: Not that we are aware of. If you are looking for a VCT style baseplate that offers such functionality we suggest the Zacuto VCT Pro Baseplate combined with the Zacuto VCT Pro Tripod Dock. https://bhpho.to/2FWS9ic https://bhpho.to/3893asP

Q: 7. Would this fit a Panasonic AG-DVX200?

A: Hello Stephen, Thank you for your question! Our BP22 would surely fit with this camera given its side LCD monitor that opens up. Because of the location of the monitor though, it might be a bit high, but if you plan on framing with an external monitor, the ergonomy of the whole setup would be a better fit. We hope this helps and we thank you for your interest in our products. The SHAPE team

Q: 8. Does this plate slide onto the dovetail or can you drop it on?

A: The 8Sinn 15mm Baseplate + Riser Plate I + 10" ARRI Dovetail Plate Bundle's base plate must slide onto the ARRI Dovetail.

Q: 9. Does this work with Komodo Cage? And does this put the camera to correct 15mm LW height?

A: NO this will not place the Komodo at the correct 15mm LW height, the komodo will require a base plate designed for that camera

Q: 10. I dont see the rod spacing listed. i hope i am not just overlooking it. thanks. what is the rod spacing?

A: 60mm