The cocoa Countryman B6 Omni Lavalier Mic for Lectrosonics Transmittersfrom Countryman B6 Omni Lavalier Mic for Lectrosonics Transmittersis a very small lav microphone measuring one tenth of an inch in diameter with changeable protective caps, which provide moisture resistance and color options. The mic can be used to capture audio for theater, broadcast, churches, and general lavalier applications.

Built with a low handling noise and rugged construction, the B6 lavalier microphone can be easily hidden in hair or on costumes, or taped to a performer's face. The aramid cable and ultra-thin diaphragm deliver a natural sound while its tiny size makes the B6 easy to position for ambient noise and feedback rejection. The B6's cable terminates to a waterproof 2.5mm connector for direct connection to a Lectrosonics MM200, MM400, MM400a, MM400b, or MM400c wireless bodypack transmitter.

Additionally, swappable protective caps let you shape the frequency response for different situations or match other microphones. The B6 microphone is resistant to makeup, sweat, and moisture when used with the supplied protective caps. These caps can be quickly removed for cleaning or replacement.

For Theater, Live, & Studio Use    Detachable Connector    Waterproof 2.5mm (LW), See Description    20 Hz to 20 kHz Frequency Response    Includes 3 Capsule Protection Grids    Headroom for Strong Vocals    Windscreen    Cable Clips    Carrying Case

Looks great when you want to see it, virtually disappears when you don't. The B6 is easily hidden in hair or on costumes, with five colors to match clothing, hair, and skin tones. Use a felt tip marker to color the white caps for near-perfect concealability. Never suffer the hassle and degraded sound quality of under-clothing miking again.

The B6 is resistant to makeup, sweat, and moisture when used with the supplied protective caps, and works well in hair or on the body. The protective caps are easily removed for cleaning or replacement, and the aramid-reinforced cable gives it world-class survivability.

The B6 provides high-quality audio with low distortion at SPL up to 140 dB on 48V phantom power. The aramid cable and thin diaphragm combine to offer low handling noise. The flat frequency response accurately captures voice or instruments, and the small size makes the B6 easy to position for ambient noise and feedback rejection.

Changeable protective caps let you shape the frequency response for different situations or to match other microphones. Versions are available for different speaking or singing styles, with high overload capability for recording instruments.

Low, head miking for theater.

Related Questions and Answers

Q: 1. Since they don’t make a generic 3.5mm connector, can I cut off the Sony locking collar, and make it work on DSLR mic input?

A: The Sanken COS-11D Omni Lavalier Microphone with Normal Sensitivity & 3.5mm Locking Connector for Sony Transmitters will only work with Sony wireless transmitters. The wiring scheme used by Sony differs from that used by most other companies, but the Sennheiser 3.5mm connector is considered universal for nearly all non-Sony devices.

Q: 2. Does this locking connector Sennheiser work with the RODE GO PRO?

A: The locking connector for the Sanken COS-11D Omni Lavalier Microphone with Normal Sensitivity & 3.5mm Locking Sennheiser Connector (with Accessories, Black), BH #SAC11WNSETRB, will work with a RODE Wireless GO II or the RODE wireless PRO.

Q: 3. I read some posts about unstable connection with Sennh EW100. I want to use it with Sennheiser EW100G3 system. Everyone have problems with EW100 or it were just defective?

A: The Sanken COS-11D Omni Lavalier Microphone with Normal Sensitivity & 3.5mm Locking Sennheiser Connector should work well with Sennheiser transmitter products featuring a 3.5mm locking input connection. We are not aware of any common issues in this scenario and would suspect that perhaps the specific lavalier cable or transmitter input in the described scenario may have become intermittent with use over time.

Q: 4. will this work with a regular recorder like the Roland R05?

A: This model of the Sanken COS11D is wired specifically for use with the Sony UWP wireless system, transmitters. it is likely it will produce audio when connected to the Roland R05, however the locking connector prevents the mic jack from being properly seated. This would not be recommended for use other than intended. Sanken does not currently offer a model compatible with portable audio recorders. There are several mics that are designed for portable recorders and offer similar quality such as the Tram TR50 see B&H# TRTR50BNLSET or Countryman EMW. B&H # COMEMWSFF05B.

Q: 5. Are these locking 3.5mm / ⅛in connections compatible with the Saramonic uwmic9? The wireless receiver has a bit of a lip around the outlet…

A: Unfortunately they are not. Sanken makes the COS-11D for many wireless systems. If you don't see the name of your system listed. Then it is not made for you're system. All 3.5mm connectors are not wired the same. Because it's made for Sennheiser doesn't mean it's wired for your 3.5mm system.

Q: 6. Will this mic work on the Audio-Technica System 10 bodypacks (with correct connector, of course)?

A: Yes

Q: 7. i think if you dont have now this mic, you have to delete selling list. this is very uncomfortable..?

A: This version of the COS-11D for Sony wireless transmitters is available by special order only. We do not have it available in stock.

Q: 8. Will this work with the Lectrosonics 200 series as well?

A: Yes, the Sanken COS-11D Omni Lavalier Microphone with Normal Sensitivity & Servo-Bias TA5F Connector for Lectrosonics Transmitters will work with Lectrosonics 200 series transmitters that use a TA5 input connector.

Q: 9. I have Roland R05 recorder. Will this work with it?

A: The Sanken COS 11D-R is designed specifically to operate and connect to wireless audio systems transmitters. There is currently no version available that will function with a digital voice recorder.

Q: 10. Do Sanken COS-11D for Sennheiser Evo work with other Wireless Transmitters like SONY, Lectrosonics etc.?

A: The 3.5mm connector for Sennheiser will not work with SONY or Lectrosonics- the connector wiring is different for these, so the connector would need to be re-wired to work.