Building on the success of the well-regarded CP.2 lenses, ZEISS CP.3 35mm T2.1 Lens Sony E Mount Feetoffer the same full-frame sensor coverage and classic ZEISS look in an updated form factor and with improved mechanics and lens coatings. This 35mm Compact Prime lens is derived from the same classic optical formula as the preceding CP.2 variant and shares the same physical length as the 15, 18, 21, 25, 28, 50, and 85mm CP.3 lenses while maintaining identical focus and iris gear positioning with the entire set of CP.3 lenses, relative to the mount. All CP.3 lenses also share the same 95mm front diameter. Similar physical attributes across the lens line makes fitting lens accessories such as matte boxes, follow focuses, lens supports, and lens control motors easier and less time consuming.

Another feature handed down from the preceding CP.2 lenses is the interchangeable mounts. This lens comes with a Sony E mount installed. Though, if you wish to fit your CP.3 lens to a different camera, the lens mount can be swapped by the user for a separately available mount of a different kind. If you like the bokeh in your images to be round, even after stopping down, you will be pleased to know that the 14-bladed iris, made famous by the CP.2 lenses, has been retained.

ZEISS CP.3 35mm T2.1 Lens Sony E Mount FeetWhile the CP.3 lenses are designed for a degree of user-serviceability regarding the mount, for ideal performance and calibration, B&H recommends that mount swaps and other lens adjustments be done by a trained lens technician at a service center.

Covers Full-Frame Format    Sony E Mount    T2.1 to T22 Aperture Range    Geared Focus and Iris Control Rings    Clickless Iris Ring    14-Blade Iris    Classic ZEISS Image Rendering    Improved Ergonomics Over Last-Gen CP.2    New Lens Coatings for Enhanced Contrast    Lens Scale Marked in Feet

Zeiss lenses are known for their clean and crisp image rendering. The CP.3 series of lenses is no different. This CP.3 lens will accurately color-match to other Zeiss cinema lenses inside and out of the CP.3 range. The CP.3 lenses feature improved lens coatings and anti-reflection masking over the CP.2 range for increased contrast and reduced flare, important for capturing content with the intent of an HDR-format release.

For enhanced ergonomics over the previous-generation CP.2 lenses, the CP.3 lens barrel has been reshaped to be more similar to the renowned Zeiss Ultra Prime lenses. This new shape is easier to handle, and takes up less physical space than the original Compact Prime design. An even weight distribution ensures that these lenses will be at home handheld, locked down on a tripod, or flown on a Steadicam or motorized gimbal.

Related Questions and Answers

Q: 1. With the Zeiss CP.2 Super Speeds being discontinued, does Zeiss intend on releasing a CP.3 Super Speed line to take their place?

A: there has been no official statement from Zeiss about a Cp.3 line of super speeds

Q: 2. What is the closest focusing distance?

A: 0.26M | 10''

Q: 3. do these have a front thread?

A: Zeiss CP.3 Lenses do not have a front thread.

Q: 4. Will this work with the FX3?

A: Yes, the ZEISS CP.3 35mm T2.1 Compact Prime Lens (Sony E Mount, Feet) is compatible with the Sony FX3.

Q: 5. If I use this lens on a c300 Mark II there will be some crop correct? This lens is made for full frame camera?

A: The ZEISS CP.3 lenses - like the previous version CP.2 - are designed for full-frame cameras using 24x36mm sensor sizes. Since the camera in question uses an APS-C sensor of 13.8x24.6mm, it has an effective crop factor of 1.46x when using FF lenses.

Q: 6. Will this provide lens data such as iris t-stop/f-stop to any camera with an electronic EF mount?

A: The ZEISS CP.3 lens you are referencing has a PL mount and the meta data can be read by any PL type camera using the Cooke i/technology interface. The meta data is also accessible via the side port and can be read by such devices like the Ambient Master Lockit Plus. This would be the option when the CP.3 is fixed with an EF mount.

Q: 7. Is EF mount an option with extended data support?

A: The EF mount does not support the Cooke /i Technology protocol, so transferring meta data with this mount type is not possible. However, the meta data can be captured through the 4-pin Lemo connector on the lens barrel using Ambient's Master Lock-It Plus. For more information, please visit: https://www.zeiss.com/consumer-products/int/cinematography/content/extended-data.html.

Q: 8. Is there a 65mm CP3?

A: No, there is not a 65mm version of the ZEISS CP.3 85mm T2.1 Compact Prime Lens (PL Mount, Feet).

Q: 9. If using a super 35mm sensor with this full frame lens, would one need to use the crop factor of 1.5 to determine the equivalent field of view?

A: Yes you would. To take it a step further all lenses are listed by their physical focal length and from there the crop factor needs to be taken in to account. Even lenses that only cover a Super 35mm sensor will be subject to a crop factor. Any lens, regardless of it is covers Super 35mm or Full Frame, will need to have the 1.5x crop factor added.

Q: 10. Will this crop in if I use the red Komodo? What is the super 35 equivalent?

A: The RED Komodo's sensor will crop the ZEISS CP.3 25mm T2.1 Compact Prime Lens' image circle. The Super35 equivalent focal length of this lens on the RED Komodo is 38mm.