Cross-switch video from up to eight HDMI sources such as a laptop, computer, DVD, Blu-ray, or media player to up to eight destinations such as monitors or projectors with the MuxLab 4K60 HDMI 8x8 Matrix Switcher EU Powerfrom MuxLab. Each of the eight HDMI sources can switch up to 4K60 4:4:4 video input and output up to 4K60 4:4:4 video to the eight HDMI outputs.

Other features of the matrix include support for 3D formats, HDCP 2.2, and independent EDID control. It supports embedded digital audio input such as LPCM, Dolby rueHD, Digital Plus, Atmos, DTS-HD Master, and DTS-X, and it can de-embed digital audio via eight RCA SPDIF outputs.

The matrix also features video scaling, so that different displays with different resolutions can be simultaneously supported. Any source can be accessed at any time, by any display, by selecting it via the included IR remote control, RS-232 using the serial input, via Ethernet using telnet, or by using the selection buttons on the front panel.

8 x HDMI Inputs to 8 x HDMI Outputs    Supports up to 4K60 4:4:4 Resolution    8 x RCA SPDIF Digital Audio Outputs    LPCM and Dolby Digital Audio Support    RS-232, Ethernet, and IR Control    Durable Metal Enclosure

Eight HDMI 2.0 inputs and eight HDMI 2.0 outputs with support for up to 4K60 4:4:4 resolution video

HDCP 2.2 compliant

Full HDR support

Powerful EDID management

Supports independent port scaling and displays with different resolutions

Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus, Dolby Atmos, DTS-HD Master Audio, and DTS:X

Supports coax digital audio out (SPDIF)

Controllable via front panel, IR via remote, RS-232 via DB-9, and Telnet via RJ45 Ethernet

Optional Windows GUI control software

Fits on a standard 19" rack, and a bracket is included

Related Questions and Answers

Q: 1. Does this support 3D Blu Ray?

A: Yes the IOGEAR 2 x 2 DCI 4K HDMI Matrix Switcher supports 3D Blu-ray

Q: 2. Will this work with a video camera 1080P 60fps output including 2 channel audio?

A: Yes, and will support UHD 4K60 (3840 x 2160).

Q: 3. Does it display signal loss or other message upon switching?

A: Could you be more specific in your question? What do you mean?

Q: 4. how much time dose it take to switch ?

A: The time to switch from one source to another should be no more than .5 second.

Q: 5. will this support 1 display at 10 bit 4K60hz HDR10+ and the other HDMI port to a receiver for atmos?

A: Yes the MuxLab 1x2 UHD 4K60 HDMI 2.0 Splitter does support 10 bit 4k 60p HDR 10 video signals.

Q: 6. Are all the audio outputs simultaneous on output 4?

A: We are not sure of what is being asked. We can say that this is a matrix switcher, so whatever source you select on whatever output will also transfer the audio. However, it will not output all inputted audio streams to 1 output, if that is what you are asking. If you have further questions, please write us with further detail. provideo@bhphoto.com.

Q: 7. Does it come repopulated with some cards? or do you have to buy them individually in order for it to function?

A: It does not. This is an empty module which you would fill with cards according to your specific needs.

Q: 8. Can one source send the signal to the two output channels?

A: A single source may be routed to two displays (two outputs).

Q: 9. Can the RS-232 control and infrared control be used at the same time? I have experienced matrix switches where you start entering your from and to with infrared, and when a command comes in on RS232 it resets the infrared command and you have to start over.

A: The RS-232 and the IR can be controlled at the same time on the HDR-8x8-Plus.

Q: 10. Can a single source send the signal into the two output channels?

A: Yes. A single source may be routed to two displays/outputs.