The reversible and interchangeable Platinum Tools EZ-RJ45 Die for EXO Crimp Framefrom Platinum Tools EZ-RJ45 Die for EXO Crimp Frameis designed to work with the EXO Crimp Frame to terminate EZ-RJ45 connectors. This die is interchangeable and reversible for easy operation and works with EZ-RJ45 Cat5e, Cat6, shielded Cat5e, and Cat6 connectors.

Single Cycle Crimp & Flush Trim    Easily Interchangeable    Reversible for Ambidextrous Operation    Locking Connectors    Compatible with EZ-RJ45 Connectors

Single cycle crimp and flush trim

EZ-RJ45 Die is easily interchangeable

Reversible for ambidextrous operation

Connectors lock into tool for correct positioning during crimp

Compatible with EZ-RJ45 connectors: EZ-RJ45 Cat5e and Cat6, shielded Cat5e and Cat6 connectors (internal and external ground)

Related Questions and Answers

Q: 1. Will this work with the metabones speed booster?

A: We usually do not recommend using this lens with a speed booster as it is already designed to compensate for the crop factor change between Super 35mm and Full Frame. The lens can be configured as a 30mm-90mm Super 35mm lens or a 45mm-135mm Full Frame lens which will result in the same field of view for both configurations. (The field of view in Full Frame mode is 45.6°-15.9° and the filed of view in Super 35mm is 43.6-15.2°) Therefore it is more effective to use the lens in super 35mm mode then have it in Full Frame and use a Speed Booster if you plan on using it with Super35mm cameras. If you plan to use it with a Micro 4/3 camera a speed booster we recommend swapping the PL mount for EF first. Angenieux EF-Mount for EZ-1 and EZ-2 Zooms B&H # ANEZEFMOUNT MFR # EZ-EF MOUNT

Q: 2. Is the Angenieux 30-90mm going to come out in EF mount?

A: At this time the lens is available in PL only. You can purchase an EF adapter if you wish. Angenieux EF-Mount for EZ-1 and EZ-2 Zooms B&H # ANEZEFMOUNT.

Q: 3. My question is about focul length in regards to the camera sensor. If my sensor is diagonal 28.9 mm, and the lens image circle is 30mm, will I really get 30mm at 30mm? Or is it more like 34mm on my sensor at 30mm on the lens?

A: This lens is designed to work with cameras that have a Super 35mm/APS-C Sized Sensor. The field of view will be the 35mm Equivalent of a 45-135mm lens.

Q: 4. Will this work for terminating Canare BCP-B53 BNC ends? Looks like the opening for crimping the pin is a little off the 0.0531" spec.

A: You need the Canare TCD-35CA Die Set for BCP-B53, RCAP-C3A and FP-C3 Connectors or crimping tool that matches.

Q: 5. What is the MOD of the lens with the full frame adapter on?

A: The Angenieux EZ-1 Zoom Full-Frame Rear Lens-Group has the MOD listed at Focal Minimum: 351 x 228 mm and at Focal Maximum: 115 x 77 mm.

Q: 6. can hold 7245 binocs??

A: Unfortunately no it is too small. Nikon recommend this harness instead: https://bhpho.to/2m2dKzp

Q: 7. Hello! Can Nikon Action EX 10x50 fit in to it?

A: Yes it will fit the Nikon Action Extreme 10x50.

Q: 8. origin?

A: Reply from Simply45. "We design all of our products in the USA and manufacture in Taiwan."

Q: 9. If Im shooting with a Red Gemini, will I get a true 30mm?

A: The Red Gemini 5K has a Super 35mm Sensor. Any lens you put on it will be subject to a crop factor, which varies depending on the mode you are shooting. It will not give you a 30mm field of view as it is not a Full Frame Sensor.

Q: 10. Does it come with a case?

A: For the Angenieux EZ-2 15 to 40mm Cinema Lens Pack (Super35 and Full-Frame), there is a 2-lens kit available, which come with a case: Angenieux EZ-1 30-90mm & EZ-2 15-40mm Zoom Lens Kit with Hard Case BH #ANEZ12S35PLK