The DOD Mini Expression Pedal is designed to interface with compatible pedals, providing expression control over apposite parameters, and a footprint roughly equivalent to that of most other stompboxes. An all-steel construction ensures ruggedness over time, while a gear drive is employed to effectuate level, meaning there are no interior strings that could potentially break.

With one 1/4" output, the Mini Expression offers a selector to better gear the pedal with various connection types, allowing you to choose between TRS, TS, RTS, while adjusting the resistance to compensate. The pedal provides a linear potentiometer which can switch between 25 kOhms for TRS and RTS connections, and 10 kOhms for TS termination points. The Mini Expression Pedal is passive, so no power is required for operation.

Expression Pedal for Compatible Gear    Similar Footprint to Conventional Pedals    All-Steel Construction    Gear Drive: No Strings Attached    1 x 1/4" Output    Output TS/TRS/RTS Selectable    Linear 25-kOhm / 10-kOhm Potentiometer

• Gear Drive to ensure a reliable, string-free performance
• 3-position selector provides multiple resistances for a wide range of compatibility with apposite products
• Linear 25-kOhm / 10-kOhm potentiometer
• Size roughly equivalent to the footprint of most standard pedals

Related Questions and Answers

Q: 1. Can you use the USB port to connect to a computer, instead of using the wireless connection ?

A: Yes, the BOSS Bluetooth Wireless MIDI Expression Pedal can connect to your computer via USB.

Q: 2. HOW MUCH DOES THIS UNIT WEIGH?

A: Weight:ZED Sixty 10 FX: 4.4kg (9.7 lb)

Q: 3. What is best head to hold Canon R5 Mark II with RF 200-800mm lens for this Footage Cobra 3 C180F-P?

A: To use a long lens such as the Canon 200-800mm on the iFootage Cobra 3 Carbon Fiber Monopod with Pedal-Release Mini Tripod Base, I would recommend this Vello tilt head: https://bhpho.to/3iirVI8

Q: 4. does the mic and line inputs can be used simultaneously? like one voice + one instrument?

A: The Line input connects to the XLR input through a circuit, so the two signals will add together if both inputs are plugged in simultaneously, but there is no individual level control for each.

Q: 5. Can I use this to replace lightstand? A godox V1 or AD100 max!

A: Yes, the iFootage Cobra 3 Carbon Fiber Monopod with Pedal-Release Mini Tripod Base, BH #IFCB3C180FP has a load capacity of 17.6 lb. So it will hold the Godox V1 Flash or Godox AD100pro Pocket Flash.

Q: 6. Can I use it for osmo packet 1?

A: The DJI Pocket 2 Mini Control Stick (BH #DJP2MCS) also works with the original DJI Osmo Pocket Gimbal (BH #DJOP), but only for pan and tilt control, not zoom.

Q: 7. What is the collapsed length of the top section IF YOU REMOVE THE BOTTOM TRIPOD LEG SECTION? (Need to know for suitcase-ability

A: iFootage Cobra 3 Carbon Fiber Monopod with Pedal-Release Mini Tripod Base is 22.5 inche long without the tripod foot.

Q: 8. Can you use this with a ronin rs3 pro or other stabilizers?

A: Yes, the iFootage Cobra 3 Carbon Fiber Monopod with Pedal-Release Mini Tripod Base can be used with gimbals and other stabilizers.

Q: 9. what is the input impedance?

A: Unfortunately pedal specs available do not include input impedance. The FV-500H is however specifically designed with a high impedance input for direct connection to guitar or bass. For specific values you may wish to contact the manufacturer directly.

Q: 10. So phantom power is either all on or all off for all channels? No individual settings?

A: Yes, the 48V Phantom Power switch on the Allen & Heath ZED60-10FX - 6 Channel Mixer with Digital Effects and USB Connectivity is universal, sending phantom power to all four XLR microphone inputs when engaged.