The Rotolight V-Mount Battery for ANOVA AEOSfrom Rotolight V-Mount Battery for ANOVA AEOSis a 95Wh, lithium-ion power source for these LED lights. The battery has a D-Tap connector and requires a separately purchased charger for use. Run time for the ANOVA is approximately 3.5 hours at full power and approximately 4 hours for the AEOS at full power.

Lithium-Ion Battery    95Wh, D-Tap Connector

Related Questions and Answers

Q: 1. What transmitter would I use for the Hassleblad X1D II?

A: The Rotolight AEOS 2 Ultimate 2-Light Kit can be used with the Rotolight Elinchrom EL-Skyport Transmitter Plus HS for Nikon, https://bhpho.to/3SyAOCF, from the Hasselblad X1D II.

Q: 2. Im wondering how accurate the LED values are? When I dial in 56k, does it put out 56k? Is it accurate?

A: Yes, the Rotolight AEOS 2 LED Light when you set the color temperature to 56k it should be pretty accurate.

Q: 3. What is needed to trigger this light and use it as a HSS flash (for Canon and Sony)?

A: EOS will work with any HSS trigger/receiver combo with either a PC sync port or 3.5mm flash sync port on the receiver. The only thing that matters is that it is high speed sync capable trigger/receiver (HSS), that your camera is capable of HSS (not all are - particularly Fuji's) and that the receiver has a PC sync port or 3.5mm flash sync port, so you can connect it to AEOS, which has a 3.5mm mini jack flash sync port. You can also just use a wired PC sync cable to 3.5mm mono jack cable (for AEOS) for a much cheaper option if desired. We have tested and would specifically recommend:Pixel King PRO (This is the best price option) and you can buy as a set of 2 (one can be transmitter, one the receiver) For Sony (King PRO S) For Canon : Pixel King PRO XFor Nikon : Pixel King PRO XOther options we like :1. Phottix ODIN II (Canon/ Nikon) Or2. Sony HSS transmitter/ receiver Jason Lanier uses this but it is pretty pricey so option 1 is a better bet. Trigger:Sony FA-WRC1MReceiver: Sony FA-WRR13. Wired PC sync cable The vastly cheaper option (although obviously a little less flexible than wireless triggers) is to buy a PC sync cable, IF your camera has a PC sync port on it. Not all of them do, but if it does then you can just use a long PC sync cableThanks let me know if you have any other questions!

Q: 4. What is the continuous output of the Aeos at distances 5-6' and 10'?

A: Unfortunately, Rotolight only lists the flash output at 3ft, 6ft, 9ft, 12ft, and 15ft, listing the f-stop in continuous mode, f-stop in flash mode, and Guide Number at varying ISO settings (the link to this chart is listed below). However, they only state the Lux output measured at 3 feet, which is listed as 5750 lux @ 3ft. If you need the Lux output for the other distances, you would have to contact Rotolight directly with your inquiry by e-mailing them at enquiries@rotolight.com to see if they have this information available.http://bit.ly/2oIamrw

Q: 5. How is this mounted with light on a light stand?

A: These barndoors mount on the Rotolight AEOS which then mounts on a light stand.

Q: 6. Will this work with the Anova Pro 3?

A: The Rotolight Softbox Kit for Anova V1 / V2 / Pro / Pro 2 is not compatible with the Anova Pro 3.

Q: 7. Can these bar doors fit on a Rotolight Pro ?

A: no you will need the RL ANOVA-2-BD

Q: 8. Can the SWIT 98WH battery works well with Rotolight AEOS without compromising any of the functionalities?

A: Yes it will

Q: 9. How long will one V-mount 98Wh battery last with light at full power? Please let me know ASAP. thx

A: 3 hrs.

Q: 10. Would this light work well for outdoor dusk photos or around neon lights as a fill light?

A: Yes the Rotolight AEOS 2 Ultimate 2-Light Kit is a very versatile kit providing LED and flash in the same unit.