The CyberPower EC850LCD UPS & CSB404 Surge Protectorfrom CyberPower EC850LCD UPS & CSB404 Surge Protectorcomes equipped with twelve electrical outlets. Three of these outlets are eco controlled outlets designed to conserve energy by cutting power to USB connected peripherals when that computer is in sleep mode. This UPS also comes equipped with six battery- and surge-protected outlets and six surge-only protected outlets, providing both surge protection and battery backup in the case of a power interruption. The integrated LCD display lets you view a variety of characteristics within the UPS including input and output voltage levels, battery capacity, load capacity, and more.

The included sealed lead-acid battery comes with a typical recharge time of 8 hours along with a 10.4 minute run time at 210W and 2.15 minutes at 425W. The integrated surge protected outlets are capable of absorbing up to 526 Joules keeping your attached electrical devices safe from harmful spikes in electrical current. Also included with this UPS is CyberPower's own PowerPanel Personal Edition software. When this software is used with a compatible Windows-based PC, you can instruct the PowerPanel software to save open files, set the machine to hibernate mode, and safely shut down the PC when the backup battery is depleted.

850 VA / 510W Simulated Sine Wave UPS    Standby Topology    Energy-Conserving ECO Technology    Multifunction Diagnostic LCD    GreenPower UPS Technology    Four Outlets    Power Switch    Impact-Resistant Casing    Straight Plug    4' Cord Length

The user selectable ECO mode removes power to computer peripherals connected to the ECO designated outlets when the UPS detects the computer, connected to the UPS via USB, is turned off or in sleep mode. This results in additional cost savings by eliminating the power consumption of idle devices.

With an integrated front panel display, you can view multiple UPS vitals including input voltage level, output voltage level, battery capacity, runtime estimate, load capacity, normal mode, battery mode, overload, and silent mode.

This ENERGY STAR qualified UPS system utilizes CyberPower's own patented GreenPower UPS High Efficiency design to reduce power consumption by increasing power efficiency to greater than 98% to save costs and reduce emissions.

This uninterruptable power supply comes with reduced sound emissions.

Shielding against electromagnetic interference and radio frequency signals prevents line noise ("humming") over telephone lines or audio systems.

Widely-spaced outlets accommodate large transformer-based plugs without compromising the utility of other outlets.

The integrated HID compliant USB port enables full integration with built-in power management and auto shutdown features of Windows, Linux and Mac OS.

Compact size for mounting horizontal or vertical.

LED status lights indicate Power-On and ECO on/off.

Distinctive tones identify when the unit is running on battery power, if it is overloaded, or when the battery is low.

The user may use this convenient unit reset switch in case of an overload.

In the event of a power outage, PowerPanel Personal Edition saves open files and "hibernates" the PC to increase the run-time on the UPS unit. PowerPanel is easily installed on any Windows-based PC and uses minimal system resources. A siagnostic screen displays the status of the UPS, including silent operation mode, configurable system notifications, automatic self tests, adjustable high/low voltage warnings, event/data logging, and scheduled shutdowns.

The included PowerPanel power management software has been fully tested and is compatible with Windows 8 32/64, Windows 7 32/64, Vista 32/64, XP 32/64, 2000, 2003, Server 2008, and Server 2012.

Related Questions and Answers

Q: 1. Is a 4ms delay adequate to provide uninterrupted power to the OWC ThunderBay 8 128TB 8-Bay Thunderbolt 3 RAID 5 Array?

A: Yes, 4ms would be considered a lower than average transfer time and would be suitable for most devices.

Q: 2. Is this unit manageable via network connectivity (RJ45)? Specification page says serial via RJ45 but nothing about remote management via network. Thanks.

A: It is possible that the use of the word "serial" throws off users but APC refers to the port as the APC SmartConnect port which is indeed the network port on the rear of the unit.

Q: 3. I want to hook up to survillence system to keep powered up when losing utility power. I assume this will do the trick?

A: Absolutely will be fine.Most surveillance systems draw very little power, and the near perfect sine-wave output is great for video equipment that would otherwise be susceptible to electronic noise (ie. spurious lines in the video, etc). However, this unit can only keep your surveillance system running for a limited amount of time, and you can determine the amount of time by visiting the APC website and using their UPS sizing tool to help determine about how much time your system will stay powered.And a sidenote... if you are using a PC-based system to record the surveillance data, then the amount of time will be substantially reduced due to the extra power needs of PC itself, so make sure that you include the wattage of the power supply in the PC when determining your power needs.If this 1440VA (about 1050watts) will only keep your PC-based surveillance system powered for about 10-mins, then you might want to consider a larger UPS unit, or one that can accept additional battery packs to extend the power timespan.

Q: 4. How long does the battery last when the power cuts off?

A: Typical back-up and run time for 1/2 load is 11 minutes, at full load it is 4 minutes.

Q: 5. I just bought this and realized it came with a 30amp AC Plug. Can I safely adapt this to 15amp plug to use in a regular outlet? Will it just result in a slower battery charge?

A: Thank you for your interest in our products. If you do change the input power cord to 15 amp it will derate the UPS to a 1500VA UPS. It wouldn't slow charge but you would not be able to connect the same amount equipment to the UPS. We do recommend a licensed electrician change out the cord as well. For more information on this please check out the following knowledge base. https://www.apc.com/us/en/faqs/FA156517/

Q: 6. What is the battery connector on the back of the UPS for?

A: The port on the back marked battery is actually a disconnect, not a connector. It is recommended that you disconnect the battery during transportation, and this port provide a convenient way to do so.

Q: 7. Smart Card Compatibility: Is model fully compabile with: APC UPS Network Management Card 3 with 2 USB Ports and Temperature Monitoring, Newest Model 2020 (AP9641) ??

A: Thank you for your interest in our products. Yes the AP9641 will work in the SMT3000C.

Q: 8. Is there an ethernet port in the base unit ? And does this ethernet port support basic remote communication?

A: Yes, the APC Smart-UPS Battery Backup & Surge Protector with SmartConnect, B&H # APSMT3000, comes with a SmartConnect Ethernet port. SmartConnect offers cloud-based remote power monitoring, UPS firmware upgrades, remote diagnostics and proactive email notifications with recommended actions.

Q: 9. are these fat approved?

A: FAA

Q: 10. ARE THESE FAA APPROVED???

A: Hello, if you are wanting to take these on a flight you will need to check with the airline to verify that that is OK to travel with. Thanks for your question.