Styled in a high-gloss finish, the Luthier Series C10CD from Cordoba is a left-handed, nylon-string classical guitar, which combines the full, warm, and responsive tone of a Canadian cedar top with Indian rosewood for the back and sides. This construction imparts a lush, rich timbre, and tight low-end response to the instrument. As such, this iteration of the C10 will tend to have a more full-bodied and rounded sound over its counterpart—the C10SP, which sports a European spruce top.

The instrument’s mahogany neck, measuring 25.6” in scale, is outfitted with an ebony fingerboard and set to the neck in a Spanish heel joint. 19 frets are provided in total with side-position inlays at the fifth, seventh, and ninth fret for easier visual orientation. The 4mm truss rod accessible for ensuring your neck stays straight, and a bone nut has been employed to bolster sustain and resonance on open strings.

Aesthetic touches abound, such as six-ply colored-wood top purfling, three-ply maple and ebony back-and-side purfling, and Indian rosewood binding. A rosewood bridge affixes strings to the body, while at the headstock, Cordoba Premium Gold Tuning Machines with black, ebony-style buttons have been employed. These tuning machines sport a gear ratio of 14:1 for precise tuning, giving you a string-roller spacing of 35mm. A Cordoba Polyfoam Case is included with the instrument to help your instrument stay protected from harsh interior conditions when not in use.

Solid Canadian Cedar Top    Indian Rosewood Back & Sides    Mahogany Neck / C-Shaped Profile    Ebony Fingerboard    Indian Rosewood Bridge    25.6" Scale / 19 Frets    Side Inlays at 5th, 7th, 9th Frets    Indian Rosewood Binding    Pearloid Esteso Weave Rosette    Cordoba Premium Gold Tuning Machines

Neck Wood: Mahogany
Neck Joint: Spanish heel
Fingerboard: Ebony
Profile: C Shape
Truss Rod: 0.2" / 4mm
Scale Length: 25.6" / 650mm
String Spacing at Saddle: 2.3" / 59mm
Nut Width: 2.0" / 52mm
Nut Material: Bone
Side-Position Inlays: Mother-of-pearl inlays at fifth, seventh, and ninth frets
Number of Frets: 12 to body, 19 total
Tuning Machines: Cordoba Premium Gold 

Top Wood: Solid Canadian cedar
Back and Sides: Solid Indian rosewood
Binding: Indian rosewood
Purfling: 6-ply colored-wood top purfling, 3-ply maple and ebony back and side purfling
Bridge: Indian rosewood
Rosette: Pearloid Esteso weave 
Finish: High gloss polyurethane
Bracing: Fan
Body Width x Depth (Upper Bout): 11.4 x 3.7" / 290 x 95mm
Body Width x Depth (Lower Bout): 14.5 x 3.8" / 370 x 97mm
Body Length: 19.3" / 490mm
Overall Length: 39" / 990.6mm

Related Questions and Answers

Q: 1. Does this have traditional audio output in addition to USB?

A: This turntable does have a standard RCA stereo audio output as well as Bluetooth. This unit does not have USB.

Q: 2. Does the tonearm return at the end of the album or does it need to be picked up?

A: This is a fully manual turntable, so the tone arm will not raise at the end of an album side.

Q: 3. Are back and sides solid mahogany or laminated?

A: The back and sides of the Cordoba Dolce Iberia Series 7/8-Size Nylon-String Classical Guitar are made of a mahogany laminate.

Q: 4. Where is this made from? Swiss or China?

A: The country of origin is not currently available and may vary depending upon available stock.

Q: 5. Can this Turntable be hooked into a PC and is special additional SW necessary to digitize the music?

A: This model does not have a USB connection and cannot be directly connected to a computer.

Q: 6. Can I still use it/mount it for my right hand?

A: This is designed for left hand operation, but there is nothing to prevent you from using it with your right hand. It will just be oriented in the opposite direction.

Q: 7. does this turntable have an anti-skate control?

A: I do not see an anti-skate control listed in the manual for the Thorens TD-102.

Q: 8. Does this strap come with the HoldFast Gear The Camera Holdfast Accessory Clip B&H #HOCHF02 • MFR #CHF1? Or does this need to be purchased separately?

A: This comes with the camera clip.

Q: 9. Does this unit have bluetooth on/off switch?

A: According to page 02 in the manual for the Pro-Ject VT-E BT R, (17) is the bluetooth on/off switch. https://www.bhphotovideo.com/lit_files/778200.pdf

Q: 10. Does this handle have any power out? I wondered if I could power Nucleus Nano motor from it?

A: The 7-pin port on the handle can be used to power a single Nucleus-M motor through the 18650 batteries that are in the handle but we don't have a cable that would allow you to power the Nano motor (although it would theoretically be possible to power the motor through the handle).