Styled in a high-gloss finish, the Luthier Series C10SP from Cordoba is a nylon-string classical guitar, which combines the bell-like, clarion, and balanced tones of a European spruce top with Indian rosewood for the back and sides. This construction imparts a warm, rich timbre and tight low-end response to the instrument. As such, this iteration of the C10 tends to have a more focused, projected sound over its compatriot, the C10CD, which utilizes a Canadian cedar top.

Its mahogany neck, measuring 25.6” in scale, is outfitted with an ebony fingerboard and set to the neck in a Spanish heel joint. 19 frets are provided in total with side-position inlays at the fifth, seventh, and ninth fret for easy visual orientation. A 4mm truss rod is accessible for ensuring that your neck stays straight, and a bone nut has been employed to bolster sustain and resonance on open strings.

Aesthetic touches abound, such as six-ply colored-wood top purfling, three-ply maple and ebony back-and-side purfling, and Indian rosewood binding. A rosewood bridge affixes strings to the body, while at the headstock, Cordoba Premium Gold Tuning Machines with black, ebony-style buttons have been employed. These tuning machines sport a gear ratio of 14:1 for precise tuning, giving you a string-roller spacing of 35mm. A Cordoba Polyfoam Case is included with the instrument to help it stay protected from harsh interior conditions when not in use.

Solid European Spruce Top    Indian Rosewood Back & Sides    Mahogany Neck / C-Shaped Profile    Ebony Fingerboard    Indian Rosewood Bridge    25.6" Scale / 19 Frets    Side Inlays at 5th, 7th, 9th Frets    Indian Rosewood Binding    Pearloid Esteso Weave Rosette    Cordoba Premium Gold Tuning Machines

Neck Wood: Mahogany

Neck Joint: Spanish heel

Fingerboard: Ebony

Profile: C shape

Truss Rod: 0.2" / 4mm

Scale Length: 25.6" / 650mm

String Spacing at Saddle: 2.3" / 59mm

Nut Width: 2.0" / 52mm

Nut Material: Bone

Side-Position Inlays: Mother-of-pearl inlays at fifth, seventh, and ninth frets

Number of frets: 12 to body, 19 total

Tuning Machines: Cordoba premium gold 

Top Wood: Solid European spruce

Back and Sides: Solid Indian rosewood

Binding: Indian rosewood

Purfling: 6-ply colored-wood top purfling, 3-ply maple and ebony back and side purfling

Bridge: Indian rosewood

Rosette: Pearloid Esteso weave 

Finish: High gloss polyurenthane

Bracing: Fan

Body Width x Depth (Upper Bout): 11.4 x 3.7" / 290 x 95mm

Body Width x Depth (Lower Bout): 14.5 x 3.8" / 370 x 97mm

Body Length: 19.3" / 490mm

Overall Length: 39" / 990.6mm

Related Questions and Answers

Q: 1. Does this work with my Peak Design capture v3 plate?

A: Yes. You can mount Peak Design quick release plates to this cage.

Q: 2. What is covering the lense in the picture?

A: The lens cover is a Kondor Blue Body Cap - https://bhpho.to/3zkFBLS

Q: 3. Does this cage interfere with the XLR-K3M? Is the MI shoe still usable?

A: this cage does not cover the cameras smart shoe, but the handle will prevent the attachment of the Sony XLR adapter, the the XLR adapter is attached the cage handle can not be attached

Q: 4. Where are these guitars made, which country?

A: This specific model is made in China

Q: 5. Is there enough space between hot shoe and handle for Panasonic DMW-XLR1 XLR Microphone Adapter?

A: No, The included handle with the Black Mamba cage will not work with the Panasonic DMW-XLR1. Smallrig recommends adding this handle which will work with the cage and the DMW-XLR1. Smallrig Top Handle for Sony/Panasonic Cameras with Top Audio Adapter BH #SMTHSXLRK1M https://bhpho.to/3A6RuWT

Q: 6. Will this fit the new A7IV?

A: Yes. The full cage protects Sony a7 series camera while maintaining access to all ports, slots, and controls.

Q: 7. How does the Start/Stop Rec buttom connect to the camera?

A: There is an included 2.5mm Right-Angle LANC Cable (11") that makes the connection from the handle to the camera.

Q: 8. Is it also compatible with Sony A1?

A: Yes, the A1 and A7SIII are the same size.

Q: 9. Is it compatible with Sony A7III camera ?

A: This cage is ideally for an A7SIII, A7 IV or A1. For the A7III, you'll need a different cage. Like this one. https://bhpho.to/3Ke90vI

Q: 10. Does the handle interfere with use of the camera eye piece?

A: The SmallRig Black Mamba Series Camera Cage would provide sufficient amount of room to allow you to use the GH6 viewfinder.