You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Vinten Fusion Fhr-145 Robotic Head

Vinten Fusion Fhr-145 Robotic Head
  • Product Code: eq43286
  • Availability: In Stock

$76,665.00 $97,364.55

The Vinten Fusion FHR-145 Robotic Headfrom Vinten Fusion FHR-145 Robotic Headincorporates Intelligent Control Engineering (ICE) to help the head deliver unprecedented control and accuracy in a compact form. It has no external PSU or lens drives and is simple to set up, operate, and use. Designed to support typical camera and lens packages up to 145 lb, the FHR-145 provides broadcasters with a flexible yet simple solution.

Parameters
Pan Range720° (no end stops)
Tilt Range100° (±50°)
Payload145 lb / 66 kg
Rated Load Inertia7.5 kgm2
Speed0.01 to 60°/sec
Maximum Acceleration60°/sec
Resolution22-bit
Repeatability<0.03°, 2 minutes of arc
DurabilityIndoor: 100,000 cycles (27 moves/day for 10 years)
EncoderPan: >2 mil counts / rev
Tilt: >2 mil counts / rev
Operating TemperatureIndoor: 41 to 122°F / 5 to 50°C
Operating Humidity90% non-condensing
Storage Temperature-40 to 140°F / -40 to 60°C
ConnectorNeutrik True 1 power input fused
Unfused power output using Neutrik True 1 outlet
LensD-type for digital, zoom and focus
Voltage100 to 240 VAC, 50/60 Hz auto-ranging
Power Consumption175 W
IndicatorsFor power, communications, and VR data
Power SwitchOn/off switch (brightness can be adjusted)
InterfacesProfile Control: Fusion VRC, FCS16, and LCS
Own interface to setup and diagnose faults
NLDAll Fujinon and Canon full-servo lenses
MountingQuickfix, 4-bolt Mitchel
DiagnosticsLimits, feedback on shot status, GPIO, position, save data for transferring to another head, error reporting
Dimensions19.7 x 17.3 x 9.6" / 50.0 x 44.0 x 24.5 cm. including cradle
Weight51.6 lb / 23.4 kg
Cradle: 6.4 lb / 2.9 kg

Smooth camera motion control makes use of high-resolution absolute encoders and delivers accuracy of ±0.03°

Tilt lock for added security

Reconfigurable mounting cradle to suit a wide variety of camera, lens, and accessory payloads

Related Questions and Answers

Q: 1. Can this PTZ head zoom following sony camcorders: - Sony HXR-NX5U - Sony HDR-FX1000

A: Yes, Both the SONY HDR-FX1000 and the NX5U support lanc control and would be supported on the Datavideo PTR-10 PTZ head. Page 20 has all the tested cameras listed. https://bit.ly/3BsM76D

Q: 2. Is this compatible with LANC for the Sony PXW-Z90?

A: Datavideo does not list the Z90v as being compatible for LANC controller. The camera does have LANC, but they do not list it.

Q: 3. Can this be controlled by software only? Looking to use an elGato Stream Deck with the "Companion" app from BitFocus (which supports Sony, Panasonic and PTZOptics via Visca)

A: This head can be controlled via visca and if the app/software that you are using will provide standard Visca protocols it should also work on this product

Q: 4. Is the tripod plate on this head by chance compatible with the RH25D or RH45D Libec Heads? Or Vice Versa?

A: There are no reports of that being possible. Hopefully, someone has these two heads and can test them.

Q: 5. Does this support Visca over IP or only serial ?

A: The Datavideo PTR-10 MK II Robotic Pan Tilta Head (DVIP) will support "pan and tilt operations via VISCA, DVIP, RS-422, or an included IR remote control", "(Control Unit via IP, IR Remote, or VISCA)".

Q: 6. Will i be able to turn on a canon C330 mk ii or a C500 with this head?

A: You can use the Canon C100, C300 and probably the C500. Please email us to confirm the C500. prophoto@bhphoto.com.

Q: 7. Aside from the price what is the difference between this one at $877.50 AND the Vinten Vision blue3 Head (Black) B&H # VIV41060001 MFR # V4106-0001 at $1228.50 ?

A: The difference between the two heads comes down to weight capacity. The the less expensive Vision Blue Pan and Tilt Head can handle 4.6 to 11 lb/2.1 to 5.0 kg while the Vision blue3 Head can handle 6.6 to 14.6 lb/3.0 to 6.6 kg. If you wish, you can extend the blue3's capacity by getting the Vinten bluebridge Small Camera Adapter which allows cameras starting at 4.63 lb/2.10 kg.

Q: 8. Can the PTR-10 be controlled with a Panasonic AW RP-50 Controller?

A: The Datavideo PTR-10 MK II Robotic Pan Tilt Head is designed to work with Datavideo controllers like the Datavideo RMC-180 PTZ Camera Control Unit https://bhpho.to/3t1W1Z1 We cannot guaranty it could be controlled by the Panasonic AW RP-50.

Q: 9. How smooth are the pan and tilt movements? Do they ramp up and down, can they be used "on air"?

A: On page 34 of the user manual, the PTR 10 Remote Head is extremely smooth and is able to pan between 0.2–15° / sec and tilt between 0.1–10° / sec. There are 50 PAN/TILT preset positions and you will be able to adjust the pan and tilt acceleration, speed, and torque. https://www.bhphotovideo.com/lit_files/640738.pdf

Q: 10. Is this compatible with the Proaim Heavy-Duty Mitchell Base Tripod Legs?

A: Yes. Both the tripod and the Vinten V3996-0001 Vector 950 Head will support the Mitchell flat base mount.

12/09/2024

[175 W] Worth every penny. This is by far the best Video head I have ever used. Side loading, perfect balance. Buttery smooth pan and tilts.

5
06/09/2024

[175 W] The counter-balance system works silky smooth. I would recommend this tripod video head to anyone who wants their video pans & tilts to be smooth.

5
22/08/2024

[22-bit] I've had this head for over twenty years. Sorry B&H but it wasn't purchased from you, although all the other Vinten products I have were bought from you. Why is this head the only one in the Vinten range with the extraordinary TF drag design? All their other general use heads have LF drag, which is pretty much the same as everyone else has used from the days when Robert Miller patented his viscosity drag design. I now have a couple of the 75mm bowl Vision Blue heads on my lovely Flowtech legs which are very good, but they don't perform anywhere near as precisely and smoothly as my decades old Vision 100. The only way this head could be improved would be to have the amazing new Sachtler Aktiv bowl adjustment system. Come on Vinten/Vitec, you own just about every tripod brand going anyway. Why can't you combine this clever Sachtler design with the best fluid head on the market? Is brand separation that important to you? Be like ARRI, not like Rupert.

5
15/07/2024

[145 lb / 66 kg] A true broadcast quality ENG fluid head.... as smooth and strong as they come. Nothing can beat or surpass it in tilt/pan movement or build quality.

5
13/07/2024

[22-bit] Very easy to use and an unbeatable sales and shipping system.

5
11/07/2024

[7.5 kgm2] I've owned this head and tripod for a few years now. It's very solid, and about as smooth as any fluid head could be. I've owned others that cost about half or 2/3 as much, but not as good. I've used it in all weather; desert sand and heat, rain, snow, temps down to -30f, wind chills as low as -45. It hasn't skipped a beat. One minor thing... for some reason the pan bar can slip back into the rosette clamp a bit at times. You just have to loosen the clamp, turn and push the bar back in, and re-clamp. Definitely does not affect the operation, so all 5 stars is what I give it.

5
29/06/2024

[60°/sec] Man am I blown away at how great this head is! Vinten's Perfet Balance system really does work as intended and is a real joy to use. It's super easy to rebalance after a lens change and takes no time at all. I've never used a properly counterbalanced head until now...what was I waiting for? Even with a roughly 600mm lens I'm able to attain perfectly smooth, controlled pans with minimal, if any backlash. I doubt tracking people or animals with a telephoto lens would be an issue at all. Just make sure you have a solid tripod! All and all I'm extremely happy with this head and it's sure to last me a very very long time.

5
09/06/2024

[60°/sec] This product is wonderful. Dispatch is also speedy.

5
24/05/2024

[22-bit] I am using two of these and may purchase another one. I prefer the PTR-10 Mk II model over the PTR-10T Mk II as the control commands can be sent through a network switch using the DVIP protocol. I control it with an RMC-300A. I also control several Canon XF-400s over the same network. The unit works very well and also provides power for the camera. To access the DVIP controls with a PTR-10T Mk II requires the addition of the HBT-12 receiver.

5
08/05/2024

[145 lb / 66 kg] I deliberated for a long while before making the final decision to buy a GigaPan EPIC Pro V.  Originally, I wanted the EPIC Pro, after witnessing the results of that  epic  photo of the Inauguration.  I hesitated, because I also wanted video capability.  With the GigaPan EPIC Pro V, I can achieve the panning video and time-lapse video that I wanted.  Im very satisfied so far.  I would most certainly recommend this product to any photographer/videographer aspiring to add a new capability to their toolbox.  Also, great experience from B&H as always,
Vic

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Vinten Fhr-155 Robotic Head For Broadcast Cameras

$103,637.40 $130,583.12

Vinten Fhr-155 Robotic Head With Startracker System

$202,828.80 $245,422.85

Vinten Fhr-155 Robotic Vr Head With Startracker

$216,540.15 $290,163.80

Vinten Fhr-155 Robotic Vr Head 22-bit Encoder

$117,380.10 $178,417.75

Vinten Fusion Fhr-35 Remote Pan Tilt Head

$62,631.60 $88,936.87

Vinten Fusion Fpr-210+ Robotic Manual Pedestal

$261,986.25 $345,821.85

Vinten Fh-200 Robotic Head For Precision Control

$127,779.75 $186,558.43

Vinten Fh-155 Robotic Head With Startracker System

$238,354.05 $290,791.94

Vinten Fh-155 Robotic Manual Head

$139,176.90 $183,713.51

Vinten Fh-155 Robotic Vr Head With Startracker System

$252,113.85 $390,776.47

Vinten Fh-155 Robotic Manual Vr Head 22-bit Encoder

$152,885.40 $209,453.00

Vinten Fp-188 Robotic Manual Pedestal

$231,163.50 $332,875.44

Vinten Fh-145 S2 Pan Tilt Head

$102,956.25 $123,547.50

Vinten Vision 250e Fluid Head Optical Encoders

$47,070.60 $71,547.31

Vinten Vision 250 Fluid Head Osprey Plus Pedestal

$72,390.00 $106,413.30

Tiffen 6.6" Pink Soft-edge Graduated Filter

$1,424.85 $2,066.03

Products You May Like

Radial Nuance Select Studio Monitor Controller

$2,099.97 $3,338.95

Manfrotto 20" 5-in-1 Photography Reflector

$284.64 $429.81

Neewer Variable Nd Filter 49mm 1-5 Stop

$148.47 $195.98

B+w Mrc-nano Circular Polarizer Filter 86mm

$839.85 $1,100.20

Rycote Lavalier Windjammer 2-pack - White

$135.00 $179.55

Tiffen 5x6" 812 Warming Filter

$1,049.85 $1,427.80