Designed for large venues, the 120V Da-Lite 29452G Wireline Advantage Motorized Projection Screenuses thin steel cables instead of black drop to lower the screen to an appropriate viewing height. Once the screen is installed, the screen's trim conceals the rough opening in your ceiling, eliminating the need to complete additional trim work. Sliding installation brackets help make it easy to attach the screen housing to the structure above the drop ceiling.

188" Diagonal / 16:9 Aspect Ratio    Dual Vision Surface    0.9 Gain / 130° Viewing Angle    Suspended from Cable up to 29'    Slim-Tab, Low-Profile Tab-Tensioning    Hand-Held Remote Included    Built-In Radio-Frequency Motor    Seamless, Black-Backed Screen Surface    Flangeless Case

Dual Vision is a flexible vinyl surface ideal for rear projection, but capable of front projection as well. Dual Vision is ideal for video projection under controlled ambient light conditions. With a wide viewing cone and light gray tint, a sharp image with no color shift is observed regardless of location in the room. Cone: 130° Gain: 0.9

• Up to 29' of cable to accommodate appropriate viewing height in rooms with high ceilings
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension
• UL Plenum-rated case
• Works with separately available radio-frequency control accessories such as a single-channel wall switch, dry contact interface, and RS-232 interface
• Seamless screen surface

Case does not have trim flange, making it suitable for non-ceiling-recessed applications.

Related Questions and Answers

Q: 1. Godox BLP LED Projection Attachment for Bowens I can use it in godox sl 60llBi ?

A: Yes. The Godox BLP LED Projection Attachment for Bowens can be used with the Godox SL60IIBI Bi-Color LED Video Light via the common Bowens Mount that they both share.

Q: 2. I would like to find a similar projector to fit elinchrom 600w studio lights. Ideally with optional metal leaves to control the area to be lighted. Does anyone have any recommendations?

A: Please review the following item. https://bhpho.to/3pEq4Us

Q: 3. What is the focal length of the included lens?

A: The Godox BFP Flash Projection Attachment for Bowens comes with an 85mm lens.

Q: 4. Does it work with hive wasp?

A: This lens does not work on the Hive Wasp.

Q: 5. Which adjustable iris will work with the Arri Orbiter Projection Optics?

A: The ARRI Orbiter 25° Projection Optic has a standard size B 86mm iris slot.

Q: 6. Does this work with elinchrom lights?

A: No, the Dedolight Projection Attachment with 85mm f/2.8 Lens is not compatible for use with Elinchrom light fixtures. While not identical, the Elinchrom Zoom Spot Attachment, B&H # ELZSAQ, would be a similar item that works with all Elinchrom monolight fixtures and may also use gobos. It allows you to focus the light, but it will have a hard edge to the light.

Q: 7. Does this unit support the Godox QT 600 Mark 2 (not mark 3)? QT Mark 2 has a long modelling bulb.

A: It would seem the Godox BFP Flash Projection Attachment for Bowens could possibly support the Godox QT600IIM Flash Head due to the depth inside the Projection Attachment being just about 6 inches deep. Since this Projection Attachment was meant to be used with LED lights it would be advisable to simply remove the modeling lamp so as to maximize the brightness of the projection. This would also guarantee that it would fit on the light.

Q: 8. Can it be used with a bowens mount adapter?

A: This projector is designed to work with a Dedolight. It will not work with a Bowens mount.

Q: 9. does this fit on the GVM 60w cube light?

A: The GVM 36° Projection Kit was not designed to be used on the GVM 60W light. There is a compatibility list offered by GVM, and it states that this kit will only be compatible with GVM's PR150D, Pro SD200B, Pro SD300B, SD80D, SD300D, SD300S, SD200D, and SD200S models.

Q: 10. Is this compatible with LED lights? If it is, what is the maximum power output LED light which it can handle?

A: The Godox BFP Flash Projection Attachment for Bowens BH #GOBFP was designed for studio flash.