Rosco Yellow Fluorescent Lighting Tube Guard 8'are a very reliable and cost-effective system for easy control of tough lighting scenarios- especially under fluorescents. In addition to the financial benefits of the sleeves, they protect against the potential disaster of glass shattering by containing the lamp within the end caps.

Rosco sleeves are constructed of a solid polycarbonate tube within which is held the specific filter. The choice of filters and combination of filters is endless - there are complete Roscolux, Cinegel or E-Colour color filter lines - something for every venue, every photographer, every cinematographer.

For T12 Lamps    Over 300 Colors Available    UL94HB Rated Polycarbonate    End Caps Protect From Shattered Glass    Easily Trimmed with Scissors

Available in sizes for T12, T8 and T5 fluorescent lamps

The T8 and T5 sizes contain a UV filter that minimizes fading

All standard sizes (2, 4, 5, and 8') are easily trimmed to accommodate any size lamp

Related Questions and Answers

Q: 1. Are these heat resistance m? I have lights that heat up but I want to make sure these dont melt.

A: These filters have some heat resistance but if your lights get very hot, the gels will certainly melt when used for longer periods of time. Keeping the gels far enough away from the lights is ideal if possible.

Q: 2. Is the paint sensitive to both Ultra Violet A and B light?

A: As per Rosco, when this paint is used over lighter colors, it is hard to detect. It works best when used over dark colors under a blacklight.

Q: 3. How long is the power cord that is attached to each fixture? Can you recommend an extension cord with a four-outlet box that will safely handle the 382-watt load of the twelve 32W CFLs? Thank you for your help!

A: The cord is 11 feet long. There is one cord so there is no need if you need the cord to be longer to have four outlets.You should not go below 14 gauge cords. This is a link for different lengths http://bhpho.to/2ej0BYH.

Q: 4. What colors come in it?

A: 010 Medium Yellow 035 Light Pink 079 Just Blue 090 Dark Yellow Green 106 primary Red 158 Deep Orange 201 Full CT Blue 202 1/2 CT Blue 203 1/4 CT Blue 205 1/2 CT Orange 206 1/4 CT Orange 210 .6 ND 211 .9 ND 298 .15 ND 1/2 stop 247 Minus Green 285 3/4 CT Orange 701 Provence 764 Sun Color Straw 793 Vanity Fair 795 Magical Magenta

Q: 5. How do the soft boxes attach to the three fixtures in this kit? I see that the translucent covers are attached to each box with a combination of zippers and Velcro, but I can't tell how the assembled box is attached to the light head. Thank you for your help and advice!

A: The softboxes attach to this heads using 4 rod points which are located behind the lamp sockets. Those rods then slip into each corner on the black softbox fabric.

Q: 6. Can I paint cars with this?

A: While the manufacturer specifies that this paint should be applied to clean, dry surface which is free of dirt or grease, there is no mention for it being used for paint a car.

Q: 7. Would it be appropriate to us Gel-Jaws clips to attach the lighting filters to an A100 Smith-Victor?

A: Given that the A100 is 10 in diameter and the gels are typically 12x12, Im not sure that the Gel-jaws are the best tool to use. I recommend you consider using the Impact Multiclip instead: B&H#IMCC100 Mfr#CC-100

Q: 8. They don't sell the boom arm kit apart? I have everything else..

A: The Impact Aluminum Mid-Range Boom Arm, BH # IMLSABAMR2 and the Impact Heavy-Duty Air-Cushioned Light Stand (Black, 9.5'), BH # IMLS96HABI are in this kit and offered separately. https://bhpho.to/3c1rNuO https://bhpho.to/3lY2DDU

Q: 9. Can the bulbs in each head be individually turned on and off to alter the total output?

A: No, they only could be turned on or off all at the same time.

Q: 10. Why are three fixtures included, but only two stands? Also, are the lamps daylight or tungsten?

A: The description says there are three stands -- two 8-foot stands and one 9.5-foot stand. Taller one is for use with the included boom arm kit. Have you read the description?