Designed for large venues, the 220V Da-Lite 29267E Wireline Advantage 65x116 Motorized Screen 220Vuses thin steel cables instead of black drop to lower the screen to an appropriate viewing height. Once the screen is installed, the screen's trim conceals the rough opening in your ceiling, eliminating the need to complete additional trim work. Sliding installation brackets help make it easy to attach the screen housing to the structure above the drop ceiling.

133" Diagonal / 16:9 Aspect Ratio    HD Progressive 1.1 Surface    1.1 Gain / 170° Viewing Angle    Suspended from Cable up to 29'    Slim-Tab, Low-Profile Tab-Tensioning    Hand-Held Remote Included    Built-In Radio-Frequency Motor    Seamless, Black-Backed Screen Surface

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction. Cone: 170° Gain: 1.1

• Up to 29' of cable to accommodate appropriate viewing height in rooms with high ceilings
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension
• UL Plenum-rated case
• Works with separately available radio-frequency control accessories such as a single-channel wall switch, dry contact interface, and RS-232 interface
• Black-backed screen material for enhanced image quality and opacity
• Seamless screen surface

Related Questions and Answers

Q: 1. Does this light unit have a slave so that both lights flash at the same time?

A: Both lights do. Each plugs into the wall separately and a supply synch cord plugs ininto one of thelights you chose. When the shutter goefires that light and the other light fires through the slave trigger works greats the light plugged into the one light

Q: 2. I have a Pentax K3II and a Sigma 610 DG Super flash. I want to know how to do to be able to connect a flash strobe kit through a radio trigger. Which ones would be compatible for my K3II in order to be able to make the strobes functional and, if possible, also to use the Sigma? What do you recommend buying in addition to this kit?

A: I would recommend purchasing the Vello FreeWave LR Kit with 2 Receivers, B&H # VERFWLRK, for your usage needs. The Impact Two Monolight Kit (220V), B&H # IMEX100A2LKX, has a 1/8 (3.5mm) miniphone sync terminal on the rear of the strobe monolight. The Vello FreeWave LR Kit comes with a miniphone to miniphone cable, so you may connect the Vello FreeWave LR receiver to the Impact monolight. The receiver also has a hot shoe on the top of the unit, onto which you may mount the Sigma EF 610 DG Super Flash. As the kit I listed above comes with two receivers, you may connect one receiver to the Sigma EF 610 DG Super Flash, and one to one of the monolights in the Impact monolight kit. As the Impact monolights have built-in optical slaves, the unit without the Vello receiver will trigger when it sees the light output from the light fixture with the receiver. Do note the output of the Sigma EF 610 DG Super Flash will have to be set manually when using this setup. There is no option that will work and retain TTL automatic flash capability with this setup.

Q: 3. Looking for a replacement light for a Britek Halo Flood 1000P #H8048. Will this bulb fit that?

A: I don't know Curt. I do know that I bought this before reading the details. I should have bought the 110 volt, instead of the 220. I bought it for an Arri 1k.

Q: 4. 5600 k or tungsten?

A: This kit would contain monolights, which produces a color temperature of 5600K.

Q: 5. what is the power source?

A: The lights include a 120VAC power cord which is a regular USA household plug.

Q: 6. Does dimming this using an inline dimmer cause an audible hum? I'm trying to get new lights that don't do that. I know I can use scrims too, but I'd like the flexibility if possible. Thanks!

A: You're missing the point of these lamps. If you want to dim it, the best thing is the scrims. They are very effective. In addition, if you are opposed to using scrims for some reason, you have the option of pulling the bulb back. If you need more focus than when it is flooding, you can use barn doors, which you probably want any way. Finally, you can also use a 300W bulb instead of a 650W.

Q: 7. Are there also soft boxes included?(:

A: Comes with two soft boxes. I bought with two umbrellas as well, which I used shooting 141 head and shoulders photos on my first assignment. Everything but the synch cord worked perfectly.

Q: 8. Will this work on a Novatron 240?

A: If you mean would you be able to use this product along with the Novatron 240, probably. The Novatron system does not have built-in optical slaves, but the monolights with this kit do, so you should be able to fire the Novatron system with you camera and let the optical slaves on this monolight kit fire them. You have to manually adjust the power settings on these to achieve proper exposure and the lighting effect you want.

Q: 9. can this light be triggered by another flash?

A: Yes, the nature of it is that it's triggered by a flash. I have three of them, so I connect directly to one through a cord, and that one triggers the other two. But I have also found that my bounce flash will trigger any of them as well, and I think that's what you're asking about.

Q: 10. Does this come with a power cable?

A: Yes a very long power cable permanently connected to the light.