Designed for large venues, the 220V Da-Lite 29268E Wireline Advantage 65x116 Motorized Screen 220Vuses thin steel cables instead of black drop to lower the screen to an appropriate viewing height. Once the screen is installed, the screen's trim conceals the rough opening in your ceiling, eliminating the need to complete additional trim work. Sliding installation brackets help make it easy to attach the screen housing to the structure above the drop ceiling.

133" Diagonal / 16:9 Aspect Ratio    HD Progressive 1.3 Surface    1.3 Gain / 150° Viewing Angle    Suspended from Cable up to 29'    Slim-Tab, Low-Profile Tab-Tensioning    Hand-Held Remote Included    Built-In Radio-Frequency Motor    Seamless, Black-Backed Screen Surface

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Up to 29' of cable to accommodate appropriate viewing height in rooms with high ceilings
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension
• UL Plenum-rated case
• Works with separately available radio-frequency control accessories such as a single-channel wall switch, dry contact interface, and RS-232 interface
• Black-backed screen material for enhanced image quality and opacity
• Seamless screen surface

Related Questions and Answers

Q: 1. Are there two monolights in this kit? As the title says? Because when i select what is in the box list it only shows one monolight only.

A: Yes, there are two.

Q: 2. What gels can I clip on to the barn doors in order to play with the colors? The gels I already own started warping, so I took them off the barn doors.

A: You can use Lee or Rosco gels but don't keep the gels too close to the light.

Q: 3. Does dimming this using an inline dimmer cause an audible hum? I'm trying to get new lights that don't do that. I know I can use scrims too, but I'd like the flexibility if possible. Thanks!

A: You're missing the point of these lamps. If you want to dim it, the best thing is the scrims. They are very effective. In addition, if you are opposed to using scrims for some reason, you have the option of pulling the bulb back. If you need more focus than when it is flooding, you can use barn doors, which you probably want any way. Finally, you can also use a 300W bulb instead of a 650W.

Q: 4. What is the maximum watt light you can use?

A: These monolights can only except a modeling lamp up to 60 watts. The strobes themselves offer 100 watt/sec of power on each.

Q: 5. Will this work with the remote wireless flash signal produced by the OMD EM-10?

A: I'm unfamiliar with that specific wireless trigger system, but I have used two different wireless triggers with this light kit successfully. As long as the trigger uses a 1/8 mono plug, you should be fine. If not, you can buy adapters to make these things work.

Q: 6. Can these lights be on for a full shoot, or are they flash/strobe only? Looking to purchase something inexpensive for filming purpose, and won't need the flash setting.

A: You could use the modeling lights for filming but it's probably cheaper to just by led modeling lights with more wattage. I think the modeling lights on this kit is about 60 watts. Modeling lights are used to see the lighting and to help your camera focus on the subject.

Q: 7. does this unit have hss?

A: No it doesn't have HSS

Q: 8. Are these lights tungsten or daylight ( 5500K). Can I use my Nikon on auto white or have to balance?

A: Strobe lights are typically daylight-balanced. You would either use the daylight-balanced or flash-balanced white balance preset on your camera, or you would use the Custom White Balance setting to set a custom white balance. Auto White Balance is not recommended for strobe usage.

Q: 9. Are there also soft boxes included?(:

A: Comes with two soft boxes. I bought with two umbrellas as well, which I used shooting 141 head and shoulders photos on my first assignment. Everything but the synch cord worked perfectly.

Q: 10. Will this work on a Novatron 240?

A: If you mean would you be able to use this product along with the Novatron 240, probably. The Novatron system does not have built-in optical slaves, but the monolights with this kit do, so you should be able to fire the Novatron system with you camera and let the optical slaves on this monolight kit fire them. You have to manually adjust the power settings on these to achieve proper exposure and the lighting effect you want.