Designed for large venues, the 220V Da-Lite 29451E Wireline Advantage 78x139 Motorized Screen 220Vuses thin steel cables instead of black drop to lower the screen to an appropriate viewing height. Once the screen is installed, the screen's trim conceals the rough opening in your ceiling, eliminating the need to complete additional trim work. Sliding installation brackets help make it easy to attach the screen housing to the structure above the drop ceiling.

159" Diagonal / 16:9 Aspect Ratio    Dual Vision Surface    0.9 Gain / 130° Viewing Angle    Suspended from Cable up to 29'    Slim-Tab, Low-Profile Tab-Tensioning    Hand-Held Remote Included    Built-In Radio-Frequency Motor    Seamless, Black-Backed Screen Surface

Dual Vision is a flexible vinyl surface ideal for rear projection, but capable of front projection as well. Dual Vision is ideal for video projection under controlled ambient light conditions. With a wide viewing cone and light gray tint, a sharp image with no color shift is observed regardless of location in the room. Cone: 130° Gain: 0.9

• Up to 29' of cable to accommodate appropriate viewing height in rooms with high ceilings
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension
• UL Plenum-rated case
• Works with separately available radio-frequency control accessories such as a single-channel wall switch, dry contact interface, and RS-232 interface
• Seamless screen surface

Related Questions and Answers

Q: 1. Does this come with a power cable?

A: Yes a very long power cable permanently connected to the light.

Q: 2. I have a Pentax K3II and a Sigma 610 DG Super flash. I want to know how to do to be able to connect a flash strobe kit through a radio trigger. Which ones would be compatible for my K3II in order to be able to make the strobes functional and, if possible, also to use the Sigma? What do you recommend buying in addition to this kit?

A: I would recommend purchasing the Vello FreeWave LR Kit with 2 Receivers, B&H # VERFWLRK, for your usage needs. The Impact Two Monolight Kit (220V), B&H # IMEX100A2LKX, has a 1/8 (3.5mm) miniphone sync terminal on the rear of the strobe monolight. The Vello FreeWave LR Kit comes with a miniphone to miniphone cable, so you may connect the Vello FreeWave LR receiver to the Impact monolight. The receiver also has a hot shoe on the top of the unit, onto which you may mount the Sigma EF 610 DG Super Flash. As the kit I listed above comes with two receivers, you may connect one receiver to the Sigma EF 610 DG Super Flash, and one to one of the monolights in the Impact monolight kit. As the Impact monolights have built-in optical slaves, the unit without the Vello receiver will trigger when it sees the light output from the light fixture with the receiver. Do note the output of the Sigma EF 610 DG Super Flash will have to be set manually when using this setup. There is no option that will work and retain TTL automatic flash capability with this setup.

Q: 3. What is the maximum watt light you can use?

A: These monolights can only except a modeling lamp up to 60 watts. The strobes themselves offer 100 watt/sec of power on each.

Q: 4. Are there two monolights in this kit? As the title says? Because when i select what is in the box list it only shows one monolight only.

A: Yes, there are two.

Q: 5. If I purchase a pc chord adapter, is this compatible with a canon rebel t3?

A: Yes you can use the Vello Universal Hot Shoe Adapter for PC Connection B&H # VEHSAPCU in order to sync these monolights with a Canon EOS Rebel T3. Additionally, you may also want to purchase a light meter to help measure the output of these monolights. It can be connected with the same sync cable. One such meter is the Sekonic L-308S-U Flashmate Light Meter B&H # SEL308SU. Please see the images below for reference.

Q: 6. what is the power source?

A: The lights include a 120VAC power cord which is a regular USA household plug.

Q: 7. Im Looking for lights that will work for an ecommerce site that will produce an all white pure background with no grey. If i buy two of these kits will I be able to shoot a full body shot on a live model and will the background come out white? my model is 5 10 / 5'11.. thanks

A: I The only way I believe these or any two lights will produce a pure white background is to use a green screen background and remove the background (or make it white) with software. If the exposer is correct for the subject, the exposer will always be somewhat less for the background the difference may be acceptable, but not absolute. can think of one vay these only way these (or any two

Q: 8. Are there also soft boxes included?(:

A: Comes with two soft boxes. I bought with two umbrellas as well, which I used shooting 141 head and shoulders photos on my first assignment. Everything but the synch cord worked perfectly.

Q: 9. Looking for a replacement light for a Britek Halo Flood 1000P #H8048. Will this bulb fit that?

A: I don't know Curt. I do know that I bought this before reading the details. I should have bought the 110 volt, instead of the 220. I bought it for an Arri 1k.

Q: 10. Will this work with the remote wireless flash signal produced by the OMD EM-10?

A: I'm unfamiliar with that specific wireless trigger system, but I have used two different wireless triggers with this light kit successfully. As long as the trigger uses a 1/8 mono plug, you should be fine. If not, you can buy adapters to make these things work.