Designed for large venues, the 220V Da-Lite 29213EG Wireline Advantage Motorized Projection Screenuses thin steel cables instead of black drop to lower the screen to an appropriate viewing height. Once the screen is installed, the screen's trim conceals the rough opening in your ceiling, eliminating the need to complete additional trim work. Sliding installation brackets help make it easy to attach the screen housing to the structure above the drop ceiling.

188" Diagonal / 16:9 Aspect Ratio    HD Progressive 0.6 Surface    0.6 Gain / 170° Viewing Angle    Suspended from Cable up to 29'    Slim-Tab, Low-Profile Tab-Tensioning    Hand-Held Remote Included    Built-In Radio-Frequency Motor    Seamless, Black-Backed Screen Surface    Flangeless Case

Ideal for high output projectors or applications where projector brightness and screen size require low gain, the gray surface compensates for a brightly lit environment so that image contrast is preserved. In low ambient light, HD Progressive 0.6 provides deep contrast and is typically used with video. Cone: 170° Gain: 0.6

• Up to 29' of cable to accommodate appropriate viewing height in rooms with high ceilings
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension
• UL Plenum-rated case
• Works with separately available radio-frequency control accessories such as a single-channel wall switch, dry contact interface, and RS-232 interface
• Black-backed screen material for enhanced image quality and opacity
• Seamless screen surface

Case does not have trim flange, making it suitable for non-ceiling-recessed applications.

Related Questions and Answers

Q: 1. Will this work with aputure units? Will it work with 600x/d/c?

A: The Godox BLP LED Projection Attachment for Bowens BH #GOBLP is designed for Bowens mount LED lights under 300w.

Q: 2. CAN I USE THE Godox BLP LED Projection Attachment for Bowens on the Godox AD600Pro Witstro All-in-One Outdoor Flash?

A: Yes, the Godox BLP LED Projection Attachment for Bowens is compatible with the Godox AD600Pro Witstro All-in-One Outdoor Flash.

Q: 3. Does this unit support the Godox QT 600 Mark 2 (not mark 3)? QT Mark 2 has a long modelling bulb.

A: It would seem the Godox BFP Flash Projection Attachment for Bowens could possibly support the Godox QT600IIM Flash Head due to the depth inside the Projection Attachment being just about 6 inches deep. Since this Projection Attachment was meant to be used with LED lights it would be advisable to simply remove the modeling lamp so as to maximize the brightness of the projection. This would also guarantee that it would fit on the light.

Q: 4. Is this the DP 1.1 or the universal (older model)?

A: This is the DP 1.1. It is not the universal.

Q: 5. Is there a way to mount the BFP to a AD600 or even AD300?

A: The Godox BFP Flash Projection Attachment for Bowens BH #GOBFP can be attached directly to an AD600Pro. With an S2 adapter you can use it with an AD300Pro.

Q: 6. Will this work in Sony A6500 shooting HD at 120fps ?

A: Good day! Yes, the maximum bitrate appears to be about 12.5MB/s so that card will perform great!

Q: 7. Is this compatible with LED lights? If it is, what is the maximum power output LED light which it can handle?

A: The Godox BFP Flash Projection Attachment for Bowens BH #GOBFP was designed for studio flash.

Q: 8. Compatible with A7siii and raw recording?

A: The a7s III raw video can only be recorded with an external recorder. The Delkin Devices 1TB Advantage UHS-I SDXC Memory Card will work for raw still images.

Q: 9. I would like to find something exactly like this projector for my elinchrom lights. Most importantly the ability to use metal leaves to control the light projection. Can anyone recommend something with similar features for elinchrom studio strobes? I see Westcott make an "optical spot" modifier. Is this the only option available for elinchrom?

A: The Westcott Optical Spot by Lindsay Adler for Elinchrom, BH # WEOSLAELNCRM would be the only projection attachment currently offered to fit an Elinchrom head. https://bhpho.to/3mKC2Km

Q: 10. Does this work with elinchrom lights?

A: No, the Dedolight Projection Attachment with 85mm f/2.8 Lens is not compatible for use with Elinchrom light fixtures. While not identical, the Elinchrom Zoom Spot Attachment, B&H # ELZSAQ, would be a similar item that works with all Elinchrom monolight fixtures and may also use gobos. It allows you to focus the light, but it will have a hard edge to the light.