Designed for large venues, the 220V Da-Lite 29458EG Wireline Advantage Motorized Projection Screen 220Vuses thin steel cables instead of black drop to lower the screen to an appropriate viewing height. Once the screen is installed, the screen's trim conceals the rough opening in your ceiling, eliminating the need to complete additional trim work. Sliding installation brackets help make it easy to attach the screen housing to the structure above the drop ceiling.

137" Diagonal / 16:10 Aspect Ratio    Dual Vision Surface    0.9 Gain / 130° Viewing Angle    Suspended from Cable up to 29'    Slim-Tab, Low-Profile Tab-Tensioning    Hand-Held Remote Included    Built-In Radio-Frequency Motor    Seamless, Black-Backed Screen Surface    Flangeless Case

Dual Vision is a flexible vinyl surface ideal for rear projection, but capable of front projection as well. Dual Vision is ideal for video projection under controlled ambient light conditions. With a wide viewing cone and light gray tint, a sharp image with no color shift is observed regardless of location in the room. Cone: 130° Gain: 0.9

• Up to 29' of cable to accommodate appropriate viewing height in rooms with high ceilings
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension
• UL Plenum-rated case
• Works with separately available radio-frequency control accessories such as a single-channel wall switch, dry contact interface, and RS-232 interface
• Seamless screen surface

Case does not have trim flange, making it suitable for non-ceiling-recessed applications.

Related Questions and Answers

Q: 1. Does dimming this using an inline dimmer cause an audible hum? I'm trying to get new lights that don't do that. I know I can use scrims too, but I'd like the flexibility if possible. Thanks!

A: You're missing the point of these lamps. If you want to dim it, the best thing is the scrims. They are very effective. In addition, if you are opposed to using scrims for some reason, you have the option of pulling the bulb back. If you need more focus than when it is flooding, you can use barn doors, which you probably want any way. Finally, you can also use a 300W bulb instead of a 650W.

Q: 2. Hi, which exactly is the Mini to PC Synch Cord? Could you send me a link?I have a canon 650D and i'm not pretty sure if i can manage these lights from my camera.Thanks.

A: A mini to PC sync cord would allow a camera with a sync terminal to be connected to these lights. Please see the following link for an example of the cable: a href= http://bhpho.to/1qtaQvJ. target= _blank http://bhpho.to/1qtaQvJ./a As for use with the Canon 650D, you would need a hotshoe to PC sync adapter to use these monolights. Please see the link for the adapter: a href= http://bhpho.to/1jT4Cko target= _blank http://bhpho.to/1jT4Cko/a

Q: 3. What is the maximum watt light you can use?

A: These monolights can only except a modeling lamp up to 60 watts. The strobes themselves offer 100 watt/sec of power on each.

Q: 4. I have set this up and use an on-camera flash to trip the two lights BUT I am NOT able to vary the output of the flash. I dial from full to 1/8 but only the modeling light varies in intensity. Am I doing something wrong?Lucian

A: Just to be sure - when reducing flash power, you must dump the flash first and then measure power. This means if the flash is at full power and you reduce it to an 1/8, you must first fire a flash to dump the power out of the flash capacitors and reduce their charge to an 1/8 and then measure your flash output. If the flash remains at full for a 3rd and 4th shot, then it may be faulty.

Q: 5. 5600 k or tungsten?

A: This kit would contain monolights, which produces a color temperature of 5600K.

Q: 6. What color temperature do theses lights output?

A: 3200 Kelvin, or basic Tungsten. You can add color temperature gels to change it, which is what I did.

Q: 7. How long is the sync cord? Can you buy a sync cord in longer lengths?

A: The included sync cable is 15 feet long. You can an extension like the Impact Sync Cord Male PC to Female PC (16') B&H # IMPCMPCF16.

Q: 8. does this unit have hss?

A: No it doesn't have HSS

Q: 9. Will this strobe work with 3rd party modifiers, or only the supplied softboxes?

A: That model strobe uses the Elinchrom mount also called EX. There are a few different manufactures that make modifiers with that mount, Elinchrom, Impact and Interfit. Note to be careful when picking it out that it is the correct mount. Impact and Interfit make different mounts not just EX.

Q: 10. I got my Arri 650 plus today, and when i turn the focus knob, it seems that it turns off the light if i turn it all the way left, or all the way right. is that supposed to happen? it feels like the knob is a bit sensitive too. thanks

A: No, this certainly shouldn't happen. Perhaps there's something amiss with the wiring. I suggest taking back for a review or simply exchanging for another.