Designed for large venues, the 220V Da-Lite 29316EG Wireline Advantage Motorized Projection Screen 220Vuses thin steel cables instead of black drop to lower the screen to an appropriate viewing height. Once the screen is installed, the screen's trim conceals the rough opening in your ceiling, eliminating the need to complete additional trim work. Sliding installation brackets help make it easy to attach the screen housing to the structure above the drop ceiling.

137" Diagonal / 16:10 Aspect Ratio    HD Progressive 1.3 Surface    1.3 Gain / 150° Viewing Angle    Suspended from Cable up to 29'    Slim-Tab, Low-Profile Tab-Tensioning    Hand-Held Remote Included    Built-In Radio-Frequency Motor    Seamless, Black-Backed Screen Surface    Flangeless Case

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Up to 29' of cable to accommodate appropriate viewing height in rooms with high ceilings
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension
• UL Plenum-rated case
• Works with separately available radio-frequency control accessories such as a single-channel wall switch, dry contact interface, and RS-232 interface
• Black-backed screen material for enhanced image quality and opacity
• Seamless screen surface

Case does not have trim flange, making it suitable for non-ceiling-recessed applications.

Related Questions and Answers

Q: 1. How many strobes. How many soft boxes in the kit.? Modeling lights?

A: This kit would include two Impact EX 100 monolights, two softboxes with speed rings, two sync cables, two power cords, flashtube/modeling lamp for each head, a reflector for each head, spare fuses for each head, Impact 8 ft light stands and a 1 year warranty on each head. The only thing not included in this kit is a bag.

Q: 2. two strobes, two soft boxes, two stands and one sync cord- Are they included in this kit?

A: This kit would include two Impact EX 100 monolights, two softboxes with speed rings, two sync cables, two power cords, flashtube/modeling lamp for each head, a reflector for each head, spare fuses for each head, Impact 8 ft light stands and a 1 year warranty on each head.

Q: 3. color mode?

A: It is a Tungsten light 3200K.

Q: 4. Does it have a dimmer?

A: No, there is no dimmer attached. You may wish to purchase one separately.

Q: 5. Looking for a replacement light for a Britek Halo Flood 1000P #H8048. Will this bulb fit that?

A: I don't know Curt. I do know that I bought this before reading the details. I should have bought the 110 volt, instead of the 220. I bought it for an Arri 1k.

Q: 6. If I purchase a pc chord adapter, is this compatible with a canon rebel t3?

A: Yes you can use the Vello Universal Hot Shoe Adapter for PC Connection B&H # VEHSAPCU in order to sync these monolights with a Canon EOS Rebel T3. Additionally, you may also want to purchase a light meter to help measure the output of these monolights. It can be connected with the same sync cable. One such meter is the Sekonic L-308S-U Flashmate Light Meter B&H # SEL308SU. Please see the images below for reference.

Q: 7. What kind of slave/remote unit is best for the strobes with a small budget?

A: A good radio trigger option on a small budget that is compatible with this monolight kit is the Impact PowerSync16 DC Radio Slave System. Please see the image below for reference.

Q: 8. Are there two lights included with this unit. Are the lights 5600K?

A: Yes, the kit comes with two Impact One Monolights. They are strobe type lights and are daylight rated.Note the camera you use this with needs to have a sync port or you will need to get an adapter or wireless sync.And this is made for still photos not video.

Q: 9. Can the Arri 650, battery powered?

A: Exactly, this spot works only with electric power. It can't be battery power.

Q: 10. can this light be triggered by another flash?

A: Yes, the nature of it is that it's triggered by a flash. I have three of them, so I connect directly to one through a cord, and that one triggers the other two. But I have also found that my bounce flash will trigger any of them as well, and I think that's what you're asking about.