Designed for large venues, the 220V Da-Lite 29455EG Wireline Advantage Motorized Projection Screenuses thin steel cables instead of black drop to lower the screen to an appropriate viewing height. Once the screen is installed, the screen's trim conceals the rough opening in your ceiling, eliminating the need to complete additional trim work. Sliding installation brackets help make it easy to attach the screen housing to the structure above the drop ceiling.

189" Diagonal / 16:10 Aspect Ratio    Dual Vision Surface    0.9 Gain / 130° Viewing Angle    Suspended from Cable up to 29'    Slim-Tab, Low-Profile Tab-Tensioning    Hand-Held Remote Included    Built-In Radio-Frequency Motor    Seamless, Black-Backed Screen Surface    Flangeless Case

Dual Vision is a flexible vinyl surface ideal for rear projection, but capable of front projection as well. Dual Vision is ideal for video projection under controlled ambient light conditions. With a wide viewing cone and light gray tint, a sharp image with no color shift is observed regardless of location in the room. Cone: 130° Gain: 0.9

• Up to 29' of cable to accommodate appropriate viewing height in rooms with high ceilings
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension
• UL Plenum-rated case
• Works with separately available radio-frequency control accessories such as a single-channel wall switch, dry contact interface, and RS-232 interface
• Seamless screen surface

Case does not have trim flange, making it suitable for non-ceiling-recessed applications.

Related Questions and Answers

Q: 1. Would this work well on a Profoto B10 light with a bowens to Profoto adapter?

A: Godox BFP Flash Projection Attachment for Bowens will work with the GTX STUDIO Bowens to Profoto Flash Head Adapter.

Q: 2. Is the speed ring interchangeable? If so, what size is it?

A: The speedring that is part of the Godox BFP Flash Projection Attachment for Bowens is not interchangeable.

Q: 3. Will this work in Sony A6500 shooting HD at 120fps ?

A: Good day! Yes, the maximum bitrate appears to be about 12.5MB/s so that card will perform great!

Q: 4. what is the size of the gobos used?

A: The Godox BFP Flash Projection Attachment for Bowens uses M size gobos (2.6" / 66 mm).

Q: 5. Does this attach directly to the ad400 pro?

A: The Godox BFP Flash Projection Attachment for Bowens has a Bowen-S connector. You can connect this light modifier to the Godox AD400Pro Witstro All-in-One Outdoor Flash with the Bowens Mount Adapter Ring included in the box with the flash.

Q: 6. What is the focal length of the included lens?

A: The Godox BFP Flash Projection Attachment for Bowens comes with an 85mm lens.

Q: 7. Would this work well for shooting on the BMPCC 4k?

A: Delkin Devices 1TB Advantage UHS-I SDXC Memory Card BH #DEDDSDW633 has a Max Read Speed: 100 MB/s, Max Write Speed: 80 MB/s and min Write Speed: 30 MB/s which is slow if you want to record at 4K60.

Q: 8. Is this compatible with LED lights? If it is, what is the maximum power output LED light which it can handle?

A: The Godox BFP Flash Projection Attachment for Bowens BH #GOBFP was designed for studio flash.

Q: 9. I would like to find something exactly like this projector for my elinchrom lights. Most importantly the ability to use metal leaves to control the light projection. Can anyone recommend something with similar features for elinchrom studio strobes? I see Westcott make an "optical spot" modifier. Is this the only option available for elinchrom?

A: The Westcott Optical Spot by Lindsay Adler for Elinchrom, BH # WEOSLAELNCRM would be the only projection attachment currently offered to fit an Elinchrom head. https://bhpho.to/3mKC2Km

Q: 10. Is this the DP 1.1 or the universal (older model)?

A: This is the DP 1.1. It is not the universal.