Designed for large venues, the 220V Da-Lite 29254EG Wireline Advantage Motorized Projection Screen 220Vuses thin steel cables instead of black drop to lower the screen to an appropriate viewing height. Once the screen is installed, the screen's trim conceals the rough opening in your ceiling, eliminating the need to complete additional trim work. Sliding installation brackets help make it easy to attach the screen housing to the structure above the drop ceiling.

226" Diagonal / 16:10 Aspect Ratio    HD Progressive 0.9 Surface    0.9 Gain / 170° Viewing Angle    Suspended from Cable up to 29'    Slim-Tab, Low-Profile Tab-Tensioning    Hand-Held Remote Included    Built-In Radio-Frequency Motor    Seamless, Black-Backed Screen Surface    Flangeless Case

Ideal for moderate to high output projectors, the light gray surface provides balance between color reproduction and image contrast. Cone: 170° Gain: 0.9

• Up to 29' of cable to accommodate appropriate viewing height in rooms with high ceilings
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension
• UL Plenum-rated case
• Works with separately available radio-frequency control accessories such as a single-channel wall switch, dry contact interface, and RS-232 interface
• Black-backed screen material for enhanced image quality and opacity
• Seamless screen surface

Case does not have trim flange, making it suitable for non-ceiling-recessed applications.

Related Questions and Answers

Q: 1. Are there two monolights in this kit? As the title says? Because when i select what is in the box list it only shows one monolight only.

A: Yes, there are two.

Q: 2. Will this work with the remote wireless flash signal produced by the OMD EM-10?

A: I'm unfamiliar with that specific wireless trigger system, but I have used two different wireless triggers with this light kit successfully. As long as the trigger uses a 1/8 mono plug, you should be fine. If not, you can buy adapters to make these things work.

Q: 3. does this unit have hss?

A: No it doesn't have HSS

Q: 4. Are these lights tungsten or daylight ( 5500K). Can I use my Nikon on auto white or have to balance?

A: Strobe lights are typically daylight-balanced. You would either use the daylight-balanced or flash-balanced white balance preset on your camera, or you would use the Custom White Balance setting to set a custom white balance. Auto White Balance is not recommended for strobe usage.

Q: 5. What kind of slave/remote unit is best for the strobes with a small budget?

A: A good radio trigger option on a small budget that is compatible with this monolight kit is the Impact PowerSync16 DC Radio Slave System. Please see the image below for reference.

Q: 6. does this come with a sync cord?

A: Yes the sync cord is included.

Q: 7. Does it have a dimmer?

A: No, there is no dimmer attached. You may wish to purchase one separately.

Q: 8. In the list of accessories included with this kit theres a Dedicated EX100A SpeedringCan this speedring be used with softboxes made by other softbox manufacturers?

A: Unfortunately, the speed ring included in this kit would be limited to use with the included softboxes.

Q: 9. Are there also soft boxes included?(:

A: Comes with two soft boxes. I bought with two umbrellas as well, which I used shooting 141 head and shoulders photos on my first assignment. Everything but the synch cord worked perfectly.

Q: 10. Does dimming this using an inline dimmer cause an audible hum? I'm trying to get new lights that don't do that. I know I can use scrims too, but I'd like the flexibility if possible. Thanks!

A: You're missing the point of these lamps. If you want to dim it, the best thing is the scrims. They are very effective. In addition, if you are opposed to using scrims for some reason, you have the option of pulling the bulb back. If you need more focus than when it is flooding, you can use barn doors, which you probably want any way. Finally, you can also use a 300W bulb instead of a 650W.