The AdderLink XD522 KVM Extender - 48 Char SEO Titlefeatures two DisplayPort connections and also carries S/PDIF digital audio, analog audio, high-speed and standard USB 2.0 signals, and RS-232 serial control. The system is designed to let you locate your critical computing hardware in a secure indoor environment away from the user workstation while maintaining a standard user desktop experience.

The transmitter/receiver units connect over a single or dual Cat 5e/6 or higher cables over distances up to 492'. Cat 7 shielded foiled twisted pair cables are recommended. At the maximum distance of 492', the system works in low-rate mode and supports a single 1080p60 display. In low-rate mode, the DisplayPort input 2 is disabled and a total of 148.5 MP/s is made available to the primary video port.

When working over cables measuring 328' or less, the system is capable of operating in high-rate mode, which allows you to use both DisplayPort connections and at more than twice the video bandwidth. High-rate mode supports a single UHD 4K30 or 2560 x 1600 at 60 Hz display signal or two 1920 x 1200 at 60 Hz displays.

2 x DisplayPort Monitor Inputs/Outputs    Single or Dual Link Cat 5e/6/7    328' 4K30 or Dual WUXGA High-Rate Mode    492' 1080p60 Low-Rate Mode Transmission    4 x USB-A 2.0 Tx Ports (1 Hi-Speed USB)    2 x USB-B 2.0 Rx Ports    3.5mm Line In/Out, RS-232 Serial Control    Mini-TOSLINK Supported via 3.5mm Ports    Mic and Headphone Ports    EDID Management

The system supports a maximum of UHD 4K30 8-bit or 2560 x 1600 at 60 Hz on a single monitor, or 1920 x 1200 at 60 Hz 10-bit. It supports two monitors at 1920 x1200 at 60 Hz 8-bit. HDMI and DVI monitors can be connected via optional adapters. Content protection is not supported.

Related Questions and Answers

Q: 1. Where can I buy replacement rods?

A: Replacement rods would be available through Godox directly. You may e-mail them to servicesupport@godox.com

Q: 2. What is the max working power capacity in watts? How many watts light can I attach to this at max? I don't care how long it lasts, just what light i can use max.

A: The Dracast Battery Extender works with led lights that use 24v type batteries, up to 10 amps. And the maximum working power is 240 watts.

Q: 3. What adaptor would I need to use this with Broncolor lights ?

A: The Elinchrom Litemotiv Octa Bracket for Bron Pulso, B&H # ELLMBBP, would be required to connect the Godox P120L Parabolic Softbox with Bowens Mounting (47.2 ) to a Broncolor light fixture. It is the only 16-sided speedring we carry compatible for use with Broncolor lights.

Q: 4. If I wanted to assign different flight sim functions to the keys would this allow me to do it at the moment it’s combination key strokes so having different keys to carry out different functions would be great. Thanks

A: You would want the non KVM XK-60 on our website. KVM units are for a different purpose.

Q: 5. Is this the same as an ultra bounce floppy?

A: The Matthews Matthbounce Floppy (48 x 48") is the same size as the ultra bounce floppy. but unlike the Ultra when you open it to 48x90 inch it is white not black.

Q: 6. How can I mount this on a Paul C Buff Einstein (balcar mount)?

A: The Westcott Zeppelin Speed Ring & Bracket for Balcar B&H # WESPZBQ would be a compatible speed ring for the Einstein monolight. https://bhpho.to/2QT0HPb

Q: 7. Can the rj45 port pass POE? I want to use the HDMI for video and power a camera from the Ethernet port.

A: This product comes with a POE Extender Kit. It has POE.

Q: 8. I see two options for same sizes, what are the difference? which one should I buy if I have Godox ad300?

A: We suggest the following for your shooting needs that will accommodate both indoor and outdoor shooting. Godox P90L Parabolic Softbox with Bowens Mount (35.4") BH #GOP90L • MFR #P90L https://bhpho.to/3N2dabA Godox S2 Speedlite Bracket for Bowens BH #GOS2 • MFR #S2 https://bhpho.to/3kRen9R

Q: 9. Is there a frame available for the 18 x 48 flag?

A: 539287 is the frame empty

Q: 10. Can this be placed on a network or does it require a dedicated Cat X line?

A: The KanexPro 4K HDMI KVM Extender Kit over Cat 6 with USB 2.0 (230') uses a dedicated CAT6 cable. Kanex notes: Use a CAT5e/6 cable with low impedance STP(Shielded twisted pair) is recommended with proper grounding for excellent transmission of AV signals.