Ready to experiment photographically with far-out color and an alternative medium like cotton? Cyanotype Cotton Squares 8x8" 25 Pack Orangeprovides exactly what you need to make awesome orange prints in the sun with their Cyanotype Cotton Squares - 8 x 8" (25 Pack, Orange). The resulting print will be the original orange color wherever you placed your design and the negative space will be a deep, dark hue that pushes all that brilliant orange to the forefront. Your images will pop! Whether you're creating standalone works, or you're incorporating them into clothing or other fabric, your images are sure to get noticed.

Each cotton square is pre-washed and pre-treated, and all 25 pieces come sealed in a black light-safe bag. Take them out right before you're ready to expose for the freshest, brightest image possible. Once one side is done, the cotton square can be turned over to expose a totally different design on the other side. When finished exposing, rinse the sheet clean. Due to its archival nature, you'll be able to wash and rewash the cotton without losing contrast or color.

250 Thread Count    Pre-Washed and Pre-Treated    Ready for Sun Printing    Made of 100% Natural Fibers    Archival    Both Sides Can Be Printed    Durable for Repeat Rinsing    Final Print Can Be Embellished    Enclosed in Black Light-Safe Bag

Sun prints are made from 100% natural fibers and they are archival

You can print on both sides for unique, one-of-a-kind images

The final print can be dyed, painted, drawn on, stitched... Only your imagination limits the possibilities!

Sun prints are light sensitive - they are carefully packaged in a black light-safe bag

Wash printed fabrics in a non-phosphate detergent

1. Choose your design
Your design choices are nearly endless. Here are some ideas: Drawings or photographs that have been printed on transparencies or acetate. Actual objects such as leaves, flowers, string, toys, letters, hands, jewelry. Experiment with photographic negatives, x-rays, cut-outs or clip art, lace, and sheer fabrics. Use your imagination - try anything! Once you have chosen your design, lay it on the cyanotype material. To hold your design in place during your sun exposure, use a piece of clear glass or Plexiglas for a tight contact or lay your design loosely if there is no wind. You can also choose to pin your design down into a piece of cardboard or foam core

2. Expose your sun print
First make a test print by exposing your design in the sun for different lengths of time on a small section of cyanotype material (use the test print chart included in the instructions as a guide). Then choose the best exposure time to get the tone you want. To print on both sides of the cyanotype material, first expose one side to the sun using your desired exposure time, then turn the material over, lay the same or different design on the second side and expose it for any time you choose. Once you have exposed your sun print, remove your design

3. Rinse your sun print
When you rinse your print in water for a few minutes (until the water runs clear) your cyanotype print will begin to appear immediately. The print will be a dark hue and your design will be the original orange color of the paper. If you want a darker effect, spray hydrogen peroxide on your rinsed print. The darker color will appear instantly

Related Questions and Answers

Q: 1. What kind of resolution can you get from using a 5 x 7 B&W negative on this shirt?

A: The shirt does not have resolution. The quality of the image the shirt can produce would depend on the quality of the negative.

Q: 2. Will it fit the LILLIPUT 663 7 LCD?

A: I store a RED Touch 7 monitor. With the hinge folded up its a snug fit into the zippered area on the top section. The dimensions of the RED 7 (from RED website) Height: 4.76 in. (181 mm), with hingeWidth: 7.28 in. (185 mm)Depth: 0.52 in. (13 mm)With my monitor in I can still carry all the cables, RED Mini Mag reader, CF Card reader

Q: 3. Hi,will a Fuji XT5 with the 27mm 2.8 fit?

A: Yes, the WANDRD D1 Fanny Pack will fit the FUJIFILM X-T5 Mirrorless Camera with the FUJIFILM XF 27mm f/2.8 R WR Lens attached.

Q: 4. Will this (securely) on a Chimera Pro Panel?

A: The Matthews Silent Fabric Gridcloth (6 x 6') can work on the Chimera Pro Panel frame as long the frame is 6x6 feet.

Q: 5. What size is the inner diameter of the metal leg, wondering if these would also work on a Kupo stand?

A: The inner diameter of Matthews Rubber Feet for C-Stand (Orange, 6-Pack) is 20mm.

Q: 6. Let me refine my question regarding resolution on this shirt. Is the fabric and coating capable of rendering a 'quality' image from a high-resolution negative?

A: The Cyanotype Store Cyanotype T-Shirt (Adult Large, White) will not produce a quality' image full tonal range image.

Q: 7. Will this fit a Leica Q2?

A: No it would be too small.

Q: 8. Can the RS-232 control and infrared control be used at the same time? I have experienced matrix switches where you start entering your from and to with infrared, and when a command comes in on RS232 it resets the infrared command and you have to start over.

A: The RS-232 and the IR can be controlled at the same time on the HDR-8x8-Plus.

Q: 9. Is this device rack-mountable?

A: Yes, the Smart-AVI HDR-8X8-PLUS-S 4K 8x8 HDMI Matrix Switch with IR Remote is rack-mountable.

Q: 10. What is the width of the waist belt?

A: The Wandrd D1 fanny pack waist belt measures 1.5" wide.